运用热带爪蟾胚胎测定工业废水的发育毒性

采用热带爪蟾胚胎测定江苏省常州市8家典型行业工业废水的发育毒性,结果显示：各行业工业废水对爪蟾胚胎的发育均有不同程度的影响,而印染、啤酒、电镀和化工行业出水的发育毒性更强。试验表明,理化指标并不能完全反映工业废水的综合毒性,而热带爪蟾胚胎可有效地表征其发育毒性。比较各行业工业废水的毒性,初步探讨热带爪蟾胚胎用于工业废水毒性检测的可行性。     

Comparative studies on accumulation of Cr from metal solution and tannery effluent under repeated metal exposure by aquatic plants: its toxic effects

The present study demonstrates comparison of Cr accumulatingpotential by the plants of Najas indica Cham. (submerged),Vallisneria spiralis L. (rooted submerged) and Alternanthera sessilis R. Br. (rooted emergent) under repeatedmetal exposure and its effect on chlorophyll and protein concentrations. These plants were treated with different concentrations of Cr under repeated exposure in controlled laboratory conditions to assess the maximum metal accumulationpotential. The plants of V. spiralis accumulated significantly high amount of Cr under laboratory conditions incomparison to N. indica and A. sessilis. The maximumaccumulation of 1378, 458 and 201 g g^-1 dw Cr was found in the leaves of V. spiralis, N. indica and A. sessilis, respectively at 8 mg L^-1 after 9 day of Cr exposure. These plants have shown a decrease in chlorophyll andprotein concentrations with increase in Cr concentrations. In view of high accumulation of Cr in V. spiralis, the plantswere treated with different concentrations of tannery effluent collected from Common Effluent Treatment Plant, Unnao (UP). Theplants of V. spiralis treated with 100% tannery wastewatershowed the maximum accumulation (57.5 g g^-1 dw) of Cr in the roots after 10 days of exposure. The plants were foundeffective in removing Cr from solution and tannery effluent.     

Noise annoyance from industrial and road traffic combined noises: A survey and a total annoyance model comparison

The literature on noise annoyance emphasizes that acoustical factors cannot totally explain the annoyance felt by a population exposed to community noises, and that some non-acoustical factors have an effect on annoyance. This research paper deals with the annoyance caused by combined noises coming from road traffic and an industrial site. This type of combination has been very little studied to date. An in situ study was conducted in an area of a French town exposed to these two noise sources. To investigate the annoyance caused by these combined noises, the work involved both a mapping of the industrial and road traffic noises present in the survey area and a questionnaire designed to evaluate the noise annoyance experienced by residents and to identify the factors that probably influence noise annoyance. The results highlight the link between the noise levels measured and the annoyance felt by the respondents. They also show that certain non-acoustical factors have an impact on annoyance felt. Indeed, the results highlight a positive correlation between fear of industrial sites and the annoyance expressed. They also show correlations between some items to evaluate noise sensitivity and the annoyance expressed. No significant correlation has been found between annoyance and the other non-acoustical factors such as age, sex and length of residence. Finally, several total annoyance models were tested for this noise combination. Two of them, namely the strongest component model and a proposed perceptual version of the mixed model, were able to better predict total annoyance than the other tested models.     

Toxicity of 58 substituted anilines and phenols to algae Pseudokirchneriella subcapitata and bacteria Vibrio fischeri: comparison with published data and QSARs

A congeneric set of 58 substituted anilines and phenols was tested using the 72-h algal growth inhibition assay with Pseudokirchneriella subcapitata and 15-min Vibrio fischeri luminescence inhibition assay. The set contained molecules substituted with one, two or three groups chosen from -chloro, -methyl or -ethyl. For 48 compounds there was no REACH-compatible algal toxicity data available before. The experimentally obtained EC50 values (mg L⁻¹) for algae ranged from 1.43 (3,4,5-trichloroaniline) to 197 (phenol) and for V. fischeri from 0.37 (2,3,5-trichlorophenol) to 491 (aniline). Only five of the tested 58 chemicals showed inhibitory effect to algae at concentrations >100 mg L⁻¹, i.e. could be classified as “not harmful”, 32 chemicals as “harmful” (10-100 mg L⁻¹) and 21 as “toxic” (1-10 mg L⁻¹). The occupied para-position tended to increase toxicity whereas most of the ortho-substituted congeners were the least toxic. As a rule, the higher the number of substituents the higher the hydrophobicity and toxicity. However, in case of both assays, the compounds of similar hydrophobicity showed up to 30-fold different toxicities. There were also assay/organism dependent tendencies: phenols were more toxic than anilines in the V. fischeri assay but not in the algal test. The comparison of the experimental toxicity data to the data available from the literature as well as to QSAR predictions showed that toxicity of phenols to algae can be modeled based on hydrophobicity, whereas the toxicity of anilines to algae as well as toxicity of both anilines and phenols to V. fischeri depended on other characteristics in addition to logK_ow.     

制浆造纸废水生化出水的混凝处理研究

研究了硫酸铝和三氯化铁对制浆造纸废水生化出水的处理效果.研究发现,不调节原水pH值,硫酸铝投加量为600 mg/L或三氯化铁投加量为300mg/L时,混凝后废水的COD＜150 mg/L,色度＜50倍,出水均符合现阶段排放标准.混凝剂比较发现,在最佳反应条件下,2种混凝剂的处理效果相当,但硫酸铝混凝的成本低于三氯化铁....     

An LCA model for waste incineration enhanced with new technologies for metal recovery and application to the case of Switzerland

A process model of municipal solid waste incinerators (MSWIs) and new technologies for metal recovery from combustion residues was developed. The environmental impact is modeled as a function of waste composition as well as waste treatment and material recovery technologies. The model includes combustion with a grate incinerator, several flue gas treatment technologies, electricity and steam production from waste heat recovery, metal recovery from slag and fly ash, and landfilling of residues and can be tailored to specific plants and sites (software tools can be downloaded free of charge). Application of the model to Switzerland shows that the treatment of one tonne of municipal solid waste results on average in 425 kg CO₂-eq. generated in the incineration process, and 54 kg CO₂-eq. accrue in upstream processes such as waste transport and the production of operating materials. Downstream processes, i.e. residue disposal, generates 5 kg CO₂-eq. Savings from energy recovery are in the range of 67 to 752 kg CO₂-eq. depending on the assumptions regarding the substituted energy production, while the recovery of metals from slag and fly ash currently results in a net saving of approximately 35 kg CO₂-eq. A similar impact pattern is observed when assessing the MSWI model for aggregated environmental impacts (ReCiPe) and for non-renewable resource consumption (cumulative exergy demand), except that direct emissions have less and no relevance, respectively, on the total score. The study illustrates that MSWI plants can be an important element of industrial ecology as they provide waste disposal services and can help to close material and energetic cycles.     

SiO_2-NH_2/Fe_3O_4的制备及制药废水的深度处理

以溶剂热法制备Fe_3O_4磁性粒子,通过改良的St?ber法在其上包覆Si O_2,并用3-氨丙基三乙氧基硅烷对表面进行氨基修饰,制得Si O_2-NH_2/Fe_3O_4磁性复合材料,并将其用于制药废水二级出水的吸附处理(吸附剂投加量1 g/L、吸附时间120 min)。表征结果显示:Si O_2-NH_2/Fe_3O_4为粒径(510.0±3.6)nm的球形粒子。实验结果表明:在废水p H为5时,Si O_2-NH_2/Fe_3O_4对TOC、蛋白质、腐殖酸的吸附效果最佳,三者的去除率分别达44.14%,35.58%,33.07%,与Fe_3O_4相比分别提高了25.27,21.76,21.05百分点;废水p H为6时,Si O_2-NH_2/Fe_3O_4对多糖和色度的去除效果最佳,二者的去除率分别达26.03%和62.94%,与Fe_3O_4的最高去除率(p H=5时)相比分别提高了17.84百分点和22.45百分点;Si O_2-NH_2/Fe_3O_4重复使用4次,TOC和色度去除率均达初次使用时的87%以上。     

造纸废水的电离辐射预处理工艺研究

造纸废水是我国污染最为严重的难降解工业废水之一,研究了电离辐射处理造纸废水的可行性,探讨了混凝、辐照以及混凝-辐照组合工艺对废纸造纸废水的COD、BOD<,5>、吸光度、DOC以及有机物相对分子质量分布的影响.实验发现,造纸废水的COD主要是由相对分子质量<3 000的有机物构成,相对分子质量为1 000～3 000的...     

工业废水减量化

废物的减量化正日益得到世界各国的重视，被视作是可持续发展的一个重要方面。废物减量化，不仅可使环境得以保护，同时还带来了其他一些益处。该文从发达国家的现代化企业如何进行废水减量化淡起，从而看出企业内部通过环境管理可以既减少排污又提高经济效益的实际效果。     

卡鲁塞尔氧化沟处理低浓度煤矿工广生活污水的效果分析

结合煤矿工广生活污水处理厂的实际运行情况,对卡鲁塞尔氧化沟处理低浓度煤矿工广生活污水的效果进行分析和研究。结果表明,对CODcr、悬浮物和氨氮的去除率分别达到71％、96．7％和53％。由于低碳源、低营养的影响,氧化沟的污泥浓度（MLSS）只能保持在900-1300mg／L。适当控制氧化沟的曝气量,保持溶解氧在2．5-3．5mg／L,有利于氧化沟保持较高污泥浓度。