京津冀秋冬季工业生产热异常遥感监测探讨

为全面、客观掌握工业生产热排放对大气污染的影响,利用遥感手段分析了2018—2019年秋冬季京津冀工业生产热排放及其同比变化。结果显示:2018—2019年秋冬季,京津冀地区工业热异常点数量及秋冬热异常点辐射功率(FRP秋冬)较上年同期明显增加,工业生产活动规模及强度同比有所扩大,区域PM2. 5浓度呈增长趋势。根据FRP秋冬分布特点可将京津冀工业生产分为3类,密集型、分散型和稀少型。工业生产密集型城市FRP秋冬通常 1 500 MW,较为典型的城市如唐山、邯郸,FRP秋冬可达2 000 MW以上甚至上万MW,这些城市的空气质量也相对较差;保定是工业生产分散型城市,该城市热异常点增长显著,FRP秋冬也可达2 000 MW以上,但空间分布分散;工业生产稀少型城市热异常点较少且空气质量相对较好。     

Bioprocess technology for coal washery effluent treatment by Lemna minor

Duckweed species are promising macrophytes that can be used in wastewater treatment due to their rapid growth, ease of harvest, low fiber feed potential, and high protein contents. Waste‐water contaminants that are likely to be generated during washing of coal are total suspended solids (TSS), chemical oxygen demand (COD), acidity or alkalinity (pH), and metallic contaminants. Bioprocesses were developed to evaluate the potential of duckweed (Lemna minor) to treat coal washery effluent (CWE) as well as to study the impact on the biochemical changes of the Lemna minor. CWE samples were diluted with distilled water (DW) in different ratios as follows: T1‐CWE:DW(20:80%), T2‐CWE:DW(40:60%), T3‐CWE:DW(60:40%), T4‐CWE:DW (80:20%), T5‐CWE (100%), and Control‐DW(100%). The electrical conductivity of the effluent treated with Lemna minor was 0.035 deciSiemens per meter (dS/m) in the control at Day 10 and substantially higher at treatment ratios of 100, 80, and 60 percent (1.754, 1.842, and 1.631 dS/m). The highest amount of TSS was observed at test ratio T5 (38,834 mg/L), followed by T4 (28,816 mg/L), T3 (26,970 mg/L), T2 (15,320 mg/L), T1 (4,524 mg/L), and control (424 mg/L). Total hardness was higher (820 mg/L) in T4 compared to the control (220 mg/L). Total hardness of the effluent decreased after 30 days of incubation in all the treatment aliquots. The CWE at 20 percent concentration increased the duckweed population and no adverse impacts on its growth were observed. At higher concentration (T5) total mortality of Lemna minor was observed. The chlorophyll production was determined to be inversely proportional to the effluent concentration. Based on this study, it is concluded that Lemna minor can be used for treating CWE after dilution with fresh water.     

Ozonation of whole wheat flour and wet milling effluent: Degradation of deoxynivalenol (DON) and rheological properties

The objective of this study was to evaluate the reduction on the levels of the mycotoxin deoxynivalenol (DON) in whole wheat flour (WWF) with different moisture levels, on the wet milling effluent through ozone (O₃) processing, as well as the impact of ozonation on the rheological properties of flour. The results have shown that the reduction of DON was improved with increasing moisture and exposure time of WWF and wet milling effluent to ozone. The maximum reduction was about 80%, proving that ozonation is an effective and promising technology in reducing mycotoxins in different products. However, the process altered the rheological profile of WWF. Therefore, further studies are needed to better understand the process.     

Noise annoyance from industrial and road traffic combined noises: A survey and a total annoyance model comparison

The literature on noise annoyance emphasizes that acoustical factors cannot totally explain the annoyance felt by a population exposed to community noises, and that some non-acoustical factors have an effect on annoyance. This research paper deals with the annoyance caused by combined noises coming from road traffic and an industrial site. This type of combination has been very little studied to date. An in situ study was conducted in an area of a French town exposed to these two noise sources. To investigate the annoyance caused by these combined noises, the work involved both a mapping of the industrial and road traffic noises present in the survey area and a questionnaire designed to evaluate the noise annoyance experienced by residents and to identify the factors that probably influence noise annoyance. The results highlight the link between the noise levels measured and the annoyance felt by the respondents. They also show that certain non-acoustical factors have an impact on annoyance felt. Indeed, the results highlight a positive correlation between fear of industrial sites and the annoyance expressed. They also show correlations between some items to evaluate noise sensitivity and the annoyance expressed. No significant correlation has been found between annoyance and the other non-acoustical factors such as age, sex and length of residence. Finally, several total annoyance models were tested for this noise combination. Two of them, namely the strongest component model and a proposed perceptual version of the mixed model, were able to better predict total annoyance than the other tested models.     

Atmospheric pollution in an urban environment by tree bark biomonitoring - part II: Sr, Nd and Pb isotopic tracing

The harmful effect of manmade particles on natural processes and human health is documented by a large number of studies showing a positive correlation between particulate matter (PM) concentration and health effects. Diminution of this health risk necessitates among others the precise knowledge of the particle sources, their physical and chemical properties and their dissemination in the environment. Pb isotope ratios have been successfully used during the past decades as tracers of anthropogenic Pb disseminated in the biosphere. Here we show that tree bark biomonitoring with lead (Pb), strontium (Sr) and neodymium (Nd) isotope ratios as tracers allow a thorough analysis of the impacts of industrial and other anthropogenic emissions on the urban environment. This is the first comprehensive multi-isotope tracer study of atmospheric pollution in an urban environment allowing to identify and to integrate the different plume paths of emissions in a digital map system. This innovative approach might become an important tool for environmental management and policy-making processes dealing especially with risks and surveillance of air quality in the urban environment.     

海水烟气脱硫系统排水水质试验研究

介绍了海水烟气脱硫技术在国内外的应用情况,探讨了海水烟气脱硫系统的基本原理及工艺流程,并以海水水质标准为参照通过试验方法研究了脱硫排水对海水本底浓度的影响。     

滤布滤池强化处理城市二级出水中试研究

采用滤布滤池对南方某城市污水处理厂二级出水进行强化处理中试研究,以达到中水回用的目的。实验选用氯化铁(FeCl₃)、聚合氯化铝铁（PAFC）和聚合氯化铝（PAC）作为强化滤布滤池除磷效果的混凝剂。当不投加混凝剂时,滤布滤池对TP和COD的平均去除率为28.76%和8%,其中TP的去除效果受进水水质影响较大;当投加氯化铁、聚合氯化铝铁与聚合氯化铝强化滤布滤池时,滤布滤池对TP的平均去除率分别为63.58%、60.13%和66.94%,TP去除效果受进水水质影响较小;对SS的平均去除率分别为70.7%、64.3%和49.1%;对COD平均去除率分别为17.7%、26.3%和27.7%。滤布滤池对TN和NH₃-N去除效果不稳定。     

Sustainable engineering education in the United States

Sustainable engineering is a conceptual and practical challenge to all engineering disciplines. Although the profession has experience with environmental dimensions of engineering activities that in some cases are quite deep, extending the existing body of practice to sustainable engineering by including social and cultural domains is a significant and non-trivial challenge. Nonetheless, progress is being made, as a recent study undertaken by the Center for Sustainable Engineering in the United States demonstrates.

上向流好气滤池冬季挂膜启动及运行参数探讨

好气滤池同时具有普通滤池和曝气生物滤池的优点,能对二级出水中的COD、氨氮和浊度等指标进一步去除,提高再生水水质。试验探讨了冬季好气滤池的挂膜启动方法和运行参数,提出采用逐渐增加流量到设计流量的自然挂膜法,同时提出运行采用上向流;滤速1 m/h;气水比采用（1～3）∶1;填料填充高度与滤料直径有关;出水水头损失增加到1 m作为过滤周期的终点;适宜的冲洗强度冲洗滤池后,4 h内能恢复到滤池反冲洗前的处理状态。冬季低温条件延长了好气滤池的挂膜启动时间,但不影响挂膜质量;为保证出水质量,对好气滤池的运行滤速要通过试验确定。     

Measurement of machinery safety level in the European market: A real case based on market surveillance data

This article aims to highlight the current status of compliance to Machinery Directive 98/37/EC (transposed to Spanish regulation as RD 56/1995, of 20th January) (a new directive numbered as 2006/42/EC [Directive 2006/42/EC of the European Parliament and of the Council of 17 may 2006 on machinery, and amending Directive 95/16/EC (recast). OJ L157/24-86, 9.6.2006.], that recasts and replaced 98/37/ED directive and its amendments, came into force on 29 June 2006; it will not be applied until 29th December 2009. European Member States have a lead-time of two years to adopt and publish the national laws and regulations transposing the provisions of the new Directive into national law. Latest 10th October, Spain transposed Machinery Directive 2006/42/EC to national regulation as Real Decreto 1644/2008 [Real Decreto 1644/2008, de 10 de octubre, por el que se establecen las normas para la comercialización y puesta en servicio de las máquinas. BOE 246/2008, de 11 octubre 2008. Páginas 40995–41030]) of a particular family of machinery (hand-held, medium and small-size, deeply introduced in the market, of low-medium cost), that any user, professional or non-professional, can acquire as first-hand in any of the sales points (whether or not experts in these kind of products).At the same time, it emphasises the most significant shortcomings and non-conformities found, after analyzing the results of five consecutive Campaigns of Control of Industrial Products performed by one of the labs (placed in Spain) involved in the market surveillance European Program.