曝气量和盐度对硝化型颗粒污泥脱氮速率及粒径分布的影响

采用SBR反应器,在交替缺氧/好氧模式下处理低C/N生活污水,考察曝气量、盐度对短程硝化好氧颗粒污泥脱氮速率及粒径分布的影响.结果表明,在25 ℃、pH为7.5~8.0条件下,当进水NH₄⁺-N为65 mg·L^-1时,控制曝气量分别为8.75、12.50和16.25 L·h^-1·L^-1,在第35、24和23个周期时NH₄⁺-N去除率分别高达95.49%、98.46%和98.54%,选取12.50 L·h^-1·L^-1为最佳曝气量.控制在最佳曝气量条件下,当盐度为0时,NH₄⁺-N去除率及亚硝积累率分别为98.46%和90.42%;在盐度为5.0%时,NH₄⁺-N去除率和亚硝积累率分别为98.34%和96.71%.当曝气量从8.75 L·h^-1·L^-1提升为16.25 L·h^-1·L^-1,颗粒污泥平均粒径由170 μm增大为231.5 μm;控制曝气量在12.5 L·h^-1·L^-1,增加盐度至5.0%,颗粒污泥平均粒径由231 μm下降至156 μm,其占比由40.50%增加到48.26%.     

环境中的轮胎磨损颗粒:从路面到海洋

轮胎磨损颗粒是环境中微塑料的主要来源之一,目前全球轮胎磨损颗粒的释放量在590万t·a^-1左右,约占海洋微塑料总量的15%.轮胎磨损颗粒产生于路面,通过雨水径流迁移,进而存在于路面、土壤、沉积物、水体、生物体等环境介质中.当前轮胎磨损颗粒的检测主要通过检测标记物来实现,因此,标记物的选择是关键.同时,轮胎磨损颗粒会通过吸附和浸出污染物产生污染,对人体和生物体都有一定的健康风险.对于环境中轮胎磨损颗粒的控制,最直接的方式就是在迁移路径中截留轮胎磨损颗粒和加速轮胎磨损颗粒的分解;而改进轮胎配方,降低磨损率可从源头减少轮胎磨损颗粒的释放.目前,人们对轮胎磨损颗粒的认识不足,检测方法还需要完善,其环境行为和风险评价也缺乏相关的研究.获得轮胎磨损颗粒从路面到海洋迁移的规律性认识,对于了解其生态风险和潜在污染问题十分重要.基于此,本文归纳总结了轮胎磨损颗粒的产生、检测方法、环境分布、潜在风险和缓解措施等方面的研究成果,分析了轮胎磨损颗粒研究今后应予以关注的方向.     

城市街道常绿灌木植物叶片滞尘能力及滞尘颗粒物形态

城市园林植被中街道常绿灌木受工业排放、机动车尾气和道路扬尘等多重污染影响,其叶片生长高度恰好接近人体呼吸带,叶片受污染程度可反映人体污染暴露水平,是良好的环境质量代用指标。对于北方城市环境而言,常绿植被叶片的滞尘效应尤其重要。作者选择大气颗粒物污染严重的石家庄市为代表,对北方地区园林常用灌木植物大叶黄杨叶片的滞尘效应进行了研究。在石市4条主交通干道两旁样点首先对选定的大叶黄杨叶片进行冲洗,5日后取回载尘叶片进行滞尘量测量,重复进行5次,获得5个周期内叶片滞尘量数据;并对叶片表面滞尘颗粒物形态进行扫描电镜观察。结果表明,晴朗微风天气条件下,大叶黄杨叶片平均滞尘量为0.8614g·m-2·d-1,单叶最大饱和滞尘量为11.6197g·m-2,累积达到叶片饱和滞尘量的时间是15日。大叶黄杨叶片滞尘量大于同时期环境监测的大气降尘量,差额来自机动车排放和道路扬尘影响,这种影响约占叶片全部滞尘量的34.7%。大叶黄杨叶片表面滞尘为粒径小于10μm的颗粒物,深度清洗后叶片表面仍滞留粒径小于5μm的颗粒物,说明大叶黄杨叶片可以固定有害悬浮颗粒物并使之从大气环境中清除。本研究表明大叶黄杨强滞尘能力是城市近地面层环境中清除颗粒物污染的重要机制。     

天津近岸表层沉积物重金属和放射性核素分布特征

对渤海湾天津海域14个表层沉积物样品进行粒度、重金属和核素放射性活度测量,结果显示,沉积物组成以粉砂为主,其粒径在研究区横纵向上分别呈由南至北、由东至西逐渐变粗的分布特征.重金属元素含量为Cu:25.6~35.1mg/kg、Pb:44.1~67.7mg/kg、Zn:60~73.5mg/kg;210Pb活度为13.2~35.3Bq/kg,137Cs活度为0.05~1.28Bq/kg,重金属含量和放射性活度随粒径减小而增大,总体上呈由北至南逐渐增大的分布特征,在中部和南部分别呈由西北至东南和由西至东逐渐增大的分布特征.这主要是因为细颗粒组分对Cu、Pb、Zn、210Pb和137Cs的吸附作用大于粗颗粒组分,因此,其分布受渤海湾水流及其所导致的粒径变化所影响.     

黑炭气溶胶质谱仪(SP-AMS)分析春季PM2.5中水溶性有机气溶胶

为探讨常州春季大气细颗粒物(PM_(2.5))的化学组成及污染特征,于2017年3月1日～5月30日采集了84个有效样品,对其水溶性离子(WSIIs)、碳质组分(OC和EC)等常规组分进行了测定和分析,并采用黑炭-气溶胶质谱仪(SP-AMS)对水溶性有机气溶胶(WSOA)进行了分析.结果表明,采样期间PM_(2.5)的日均质量浓度为101. 97μg·m~(-3),超标(环境空气质量标准二级标准)率达73. 8%,以轻度、中度和重度污染为主,分别占总天数的39. 3%、21. 4%和13. 1%. WSIIs约占PM_(2.5)的39. 86%,其中二次离子(SO_4~(2-)、NH_4~+和NO_3~-)占WSIIs的81. 85%,阴阳离子电荷平衡的线性拟合直线的斜率(AE/CE)大于1(1. 09),表明PM_(2.5)偏弱酸性. OC/EC比值为2. 53,说明受二次转化的影响. SP-AMS分析WSOA组分包含C_xH_y+(32. 1%)、C_xH_yO+(30. 4%)、C_xH_yO_~(2+)(25. 4%)和H_yO~+(4. 7%),其平均氧碳比(O/C)、氢碳比(H/C)、氮碳比(N/C)和有机质-有机碳比(OM/OC)分别为0. 72、1. 53、0. 04和2. 15,高的O/C表明春季光化学反应导致的二次转化贡献较大.正定矩阵因子分析模型(PMF)对WSOA的质谱进行解析得到:类烃OA(HOA)、半挥发氧化性-生物质燃烧排放OA(SVOOA-BBOA)和低挥发性氧化性OA(LVOOA) 3种有机气溶胶,分别占WSOA总量的18. 4%、34. 1%和47. 4%.     

纳米TiO2的晶相控制及其光催化活性研究

采用sol gel法以钛酸丁酯为前驱物制备纳米TiO2 粉体 ,以TG DTA、XRD、TEM进行表征分析 ,研究了不同煅烧条件对纳米TiO2 粉体的晶相变化、微晶生长、粒径大小的影响 ,并用自制纳米TiO2 光催化降解四氟苯甲酸 ,研究了不同煅烧条件下纳米TiO2 的光催化活性。     

Investigation of the hydrodynamic behavior of diatom aggregates using particle image velocimetry

The hydrodynamic behavior of diatom aggregates has a significant influence on the interactions and flocculation kinetics of algae. However, characterization of the hydrodynamics of diatoms and diatom aggregates in water is rather difficult. In this laboratory study, an advanced visualization technique in particle image velocimetry (PIV) was employed to investigate the hydrodynamic properties of settling diatom aggregates. The experiments were conducted in a settling column filled with a suspension of fluorescent polymeric beads as seed tracers. A laser light sheet was generated by the PIV setup to illuminate a thin vertical planar region in the settling column, while the motions of particles were recorded by a high speed charge-coupled device (CCD) camera. This technique was able to capture the trajectories of the tracers when a diatom aggregate settled through the tracer suspension. The PIV results indicated directly the curvilinear feature of the streamlines around diatom aggregates. The rectilinear collision model largely overestimated the collision areas of the settling particles. Algae aggregates appeared to be highly porous and fractal, which allowed streamlines to penetrate into the aggregate interior. The diatom aggregates have a fluid collection efficiency of 10%-40%. The permeable feature of aggregates can significantly enhance the collisions and flocculation between the aggregates and other small particles including algal cells in water.     

粉末活性炭粒径对水中菲吸附动力学的影响效应研究

以菲为目标污染物,研究了粉末活性炭(PAC)在微尺度(1～ 100.Μm)下的粒径效应对多环芳烃吸附性能的影响.实验中按照中值粒径将研磨后得到的粉末活性炭划分为:PAC-1 (19 μm)、PAC-2(46μm)、PAC-3(76 μm).通过比表面积及孔隙度自动分析仪、原位拉曼光谱、扫描电镜等手段对PAC物化性质进行表征,发现粒径减小使PAC的BET比表面积和总孔容增加了10％ ～20％左右,而对PAC表面化学性质的影响较小.PAC的粒径分布对其吸附性能有显著影响,这种影响主要体现为吸附速率成倍的增加,其次是吸附容量有30％ ～36％的增幅.分别用3种动力学模型对吸附过程进行拟合,结果表明,伪二级动力学方程的拟合程度最高,PAC-1有最大的吸附速率常数k,并且随着粒径的减小,k值逐渐增大.     

铅蓄电池厂污染土壤中重金属铅的清洗及形态变化分析

以我国西南某铅蓄电池厂区内不同污染负荷的铅污染土壤为研究对象,对其中铅含量和形态进行分析,并利用不同清洗剂清洗进行筛选.对不同pH条件下铅的清洗效率和铅形态进行分析,并对不同粒径土壤进行不同时间清洗以确定最佳清洗时间.结果表明,厂区内A和B点土壤污染严重,分别达到15 703.22 mg.kg-1和1 747.78 mg.kg-1,活动态铅比例较大,残渣态仅占17.32%、11.64%、14.6%和10.2%.EDTA、盐酸、柠檬酸、鼠李糖脂和SDS这5种清洗剂中EDTA和盐酸的提取效果最好.酸性条件下的清洗不仅能有效地提取铅总量并能有效地减小铅活动态的环境风险,建议pH 4～7最为合适.粗沙粒和细沙粒的清洗效果较好,清洗粉黏粒建议改进工艺,清洗时间定为240 min效果最好.     

Investigation on the relationship between the fine particle emission and crystallization characteristics of gypsum during wet flue gas desulfurization process

The relationship between the fine particles emitted after desulfurization and gypsum crystals in the desulfurization slurry was investigated, and the crystallization characteristics varying with the operation parameters and compositions of the desulfurization slurry were discussed. The results showed that the fine particles generated during the desulfurization process were closely related to the crystal characteristics in the desulfurization slurry by comparison of their morphology and elements. With the higher proportion of fine crystals in the desulfurization slurry, the number concentration of fine particles after desulfurization was increased and their particle sizes were smaller, indicating that the optimization of gypsum crystallization was beneficial for the reduction of the fine particle emission. The lower pH value and an optimal temperature of the desulfurization slurry were beneficial to restrain the generation of fine crystals in the desulfurization slurry. In addition, the higher concentrations of the Fe^3 + ions and the F⁻ ions in the desulfurization slurry both promoted the generation of fine crystals with corresponding change of the morphology and the effect of the Fe^3 + ions was more obvious. With the application of the desulfurization synergist additive, it was beneficial for the inhibition of fine crystals while the thinner crystals were generated.