头孢中间体合成废水组成分析及主要污染物识别

为了识别头孢抗生素生产废水中的主要污染物,掌握其水质特点,对头孢抗生素中间体合成废水进行了物质组成分析。水样取自天津某头孢生产企业废水处理系统的进水和出水。采用气相色谱-质谱联用(GC-MS)技术对污染物进行检测,经色谱柱分离后将各组分的质谱图与NIST08数据库对比、定性,确定了样品预处理方法和GC-MS分析的条件。研究结果表明,头孢中间体合成废水中存在7大类30余种化合物,通过对比废水处理系统进出水组成,确定了含N多环和杂环类化合物为最难降解的污染物,为此类废水的物理强化预处理和深度处理提供了依据。     

Effect of Coal Mine Soil Contamination on the Elemental Uptake and Distribution in Two Edible Amaranthus Species,A. dubius and A. hybridus

The impact of coal mine dump contaminated soil on the elemental uptake by two edible plants, namely, Amaranthus dubius (red herbs) and Amaranthus hybridus (green herbs), was studied by investigating their response and ability to tolerate and accumulate varying levels of elements in their roots and shoots. The vegetation was grown on varying amounts of contaminated soil, viz. 0%, 5%, 15%, 25% w/w using coal mine dump soil. The soil was analyzed for soil pH, cation exchange capacity (CEC), soil organic matter (SOM), moisture content, and selected heavy metals. The distribution of six metals, namely, Pb, Cd, Hg, Ni, Mn, and Fe, in roots, stem, and leaves of the plants was determined in two stages of growth after 5 weeks and 10 weeks. All soil and plant samples were microwave digested and subjected to heavy metal analysis using the ICP-OES, GFAAS, and CVAAS. The pH of the coal mine dump contaminated soil decreased with an increase in contamination. Both the SOM and CEC values decreased, which increases the availability of elements, by providing more binding sites in the soil. Relatively, the red herbs had higher elemental concentrations than the green herbs. Both plants recorded high manganese accumulation. No mercury was detected in the soils or plants.     

Remediation of DDT-Contaminated Water and Soil by Using Pretreated Iron Byproducts from the Automotive Industry

The objective of this study was to quantify the effectiveness of different pretreated iron byproducts from the automotive industry to degrade DDT [(1,1,1-trichloro-2,2-bis(4-chlorophenyl) ethane] in aqueous solutions and soil slurry. Iron byproducts from automotive manufacturing were pretreated by three different methods (heating, solvent and 0.5N HCl acid washing) prior to experimentation. All pretreated irons were used at 5% (wt v^{? 1}) to treat 0.014 mM (5 mgL^{? 1}) of DDT in aqueous solution. Among the pretreated irons, acid pretreated iron results in the fastest destruction rates, with a pseudo first-order degradation rate of 0.364 d^{? 1}. By lowering the pH of the DDT aqueous solution from 9 to 3, destruction kinetic rates increase more than 20%. In addition, when DDT-contaminated soil slurry (3.54 mg kg^{? 1}) was incubated with 5% (wt v^{? 1}) acid-pretreated iron, more than 90% destruction of DDT was observed within 8 weeks. Moreover, DDT destruction kinetics were enhanced when Fe(II), Fe(III) or Al(III) sulfate salts were added to the soil slurry, with the following order of destruction kinetics: Al(III) sulfate > Fe(III) sulfate > Fe(II) sulfate. These results provide proof-of concept that inexpensive iron byproducts of the automotive industry can be used to remediate DDT-contaminated water and soil.     

Toxicity and Repellency of Hot Pepper Extracts to Spider Mite,Tetranychus urticae Koch

Increasing concern about persistence and environmental impact of synthetic pesticide residues require development of biodegradable and environmentally safe alternatives. The potential of using fruit extracts of hot pepper as alternatives to synthetic acaricides for controlling the two-spotted spider mite, Tetranychus urticae Koch, is explored in this study. Twenty-four Capsicum accessions (Solanaceae) were screened for their toxicity and repellency to the spider mites. Crude extracts from fruits of C. chinense, C. frutescens, C. baccatum, C. annuum, and C. pubescens were prepared in methanol and tested for their acaricidal properties. Spider mite mortality was greatest (45%) when fruit extract of accession Grif-9169 (C. annuum) was used. Results from diving board bioassays indicated that mites avoided filter paper strips treated with hot pepper extracts from accessions PI-596057 (C. baccatum), PI-195299 (C. annuum), and Grif- 9270 (C. annuum). This investigation suggests that methanolic extracts of these three accessions may have a great potential for repelling spider mites and should be field-tested on a large-scale to assess their value in managing populations of spider mites, which could reduce reliance on synthetic acaricides. An attempt was made to correlate repellency with chemical constituents of fruit extracts of the most repellent accessions to identify chemical sources of repellency. Capsaicin and dihydrocapsaicin, the pungent components of pepper fruit, were not correlated with toxicity or repellency, indicating that these are not likely related to the toxicity or repellency of the pepper fruit extracts. Other, unidentified chemicals are likely responsible for toxicity and repellency to the two-spotted spider mite     

Enhancement of phosphorus sorption onto light expanded clay aggregates by means of aluminum and iron oxide coatings

Phosphorus (P) loading from non-point or point sources increases the eutrophication risk of natural waters. The functioning of constructed wetlands (CWs) used as natural water treatment systems can be improved by means of additional materials adsorbing soluble P. In this study, light expanded clay aggregates (LECA) and LECA coated with aluminum (Al) oxide (Al-LECA) or iron (Fe) oxide (Fe-LECA) were tested for their efficiency as P sorbents in the pH range 3–8. The oxide coatings duplicated the actual sorption capacity calculated from the sorption isotherms at the P concentration in the equilibrium solution of 20 μg L⁻¹, assumed to be the allowable P level in purified water. In the oxide-coated LECAs the sorption was fast and followed both the first- and second-order Lagergren kinetic models, suggesting that the formation of a binuclear surface complex was feasible. In LECA, sorption was markedly slower and followed the first-order kinetic model, indicating that retention occurred through a monodentate attachment. These findings were in harmony with the degree of P saturation (DPS) of the sorbent surfaces at the highest P addition level (200 μg L⁻¹), DPS being decisively higher for LECA than for the oxide-coated sorbents. Accordingly, at higher pH values the competition by hydroxyl ions diminished the sorption in LECA relatively more than that in the coated sorbents. In agreement with the acidity of Al³⁺ being 100 times lower than that of Fe³⁺, at elevated pH the sorption by Al-LECA proved to be less reversible than that by Fe-LECA. The results provide evidence that in CWs Al-coated sorbents are superior to Fe-coated ones that are also redox-sensitive and may lose their sorption properties in anoxic conditions.     

Inflammatory stress response in A549 cells as a result of exposure to coal: Evidence for the role of pyrite in coal workers’ pneumoconiosis pathogenesis

On the basis of a recent epidemiological study it is hypothesized that pyrite content in coal is an important factor in coal workers’ pneumoconiosis (CWP) pathogenesis. While the role of pyrite in pathogenesis remains to be resolved, the ability of the mineral to generate reactive oxygen species (ROS) through various mechanisms is likely a contributing factor. The aim of this study was to elucidate the importance of the pyrite content of coal in generating an inflammatory stress response (ISR), which is defined as the upregulation of ROS normalized by cell viability. The ISR of A549 human lung epithelial cells in the presence of natural coal samples with variable pyrite contents was measured. Normalized to surface area, five particle loadings for each coal reference standard were analyzed systematically for a total of 24 h. The ISR generated by coals containing 0.00, 0.01, and 0.49 wt.% pyritic sulfur is comparable to,though less than, the ISR generated by inert glass beads (299% of the control). The coals containing 0.52 and 1.15 wt.% pyritic sulfur generated the greatest ISR (798% and 1426% of the control, respectively).     

北京市机动车尾气排放PM10组分特征研究

为提高机动车尾气排放可吸入颗粒物PM10成分谱的代表性和准确性,提出并采用在机动车尾气检测线上采用稀释通道采样器随机采集机动车排出PM10的采样方法。采集了591辆轻、重型汽油车和柴油车尾气排放PM10,测试并分析了颗粒物的27种组分。数据表明:机动车排放颗粒物PM10中含量丰富的组分为OC、EC、NH+4、NO-3和SO2-4;柴油车排放PM10中OC和EC的质量分数为49.08%,是汽油车(38.38%)的1.3倍,汽油车的OC/EC(2.36)是柴油车(0.78)的3倍;汽油车排放PM10中的二次转化产物(SO42-+NH4++NO3-)的质量分数为19.37%,是柴油车(3.57%)的5.4倍;汽油车排放NH+4是柴油车的5.3倍。     

齐齐哈尔市春季大气中PM2.5的污染特征分析

2013年4—6月分析了齐齐哈尔市大气PM2.5的浓度特征、元素组成、水溶性离子及其来源,并利用单颗粒分析技术获得了单颗粒的形貌、化学组成及粒度分布。结果表明,监测周期PM2.5日均质量浓度为34μg/m3,受气象条件影响显著。PM2.5单颗粒类型主要为烟尘集合体、飞灰和矿物颗粒,分别来源于煤炭燃料的燃烧、机动车尾气排放和扬尘。其中约90%的PM2.5颗粒粒径小于1.0μm,属大气细粒子。全样分析表明,PM2.5主要组成元素是Al、Fe、Ca、K、Mg和Na,而Zn、Cu和Pb因受到人为污染富集度较高。SO42-、NO3-和Cl-为PM2.5主要监测到的水溶性阴离子,NO3-与SO42-的质量浓度比说明了固定排放源对齐齐哈尔市春季大气PM2.5的贡献大于移动排放源。     

Temperature profile across the combustion zone propagating through an iron particle cloud

Knowledge of the mechanism of combustion zone propagation during dust explosion is of great importance to prevent damage caused by accidental dust explosions. In this study, the temperature profile across the combustion zone propagating through an iron particle cloud is measured experimentally by a thermocouple to elucidate the propagation mechanism. The measured temperature starts to increase slowly at a position about 5 mm ahead of the leading edge of the combustion zone, increases quickly at a position about 3 mm ahead of the leading edge, reaches a maximum value near the end of the combustion zone, and then decreases. As the iron particle concentration increases, the maximum temperature increases at lower concentration, takes a maximum value, and then decreases at higher concentration. The relation between the propagation velocity of the combustion zone and the maximum temperature is also examined. It is found that the propagation velocity has a linear relationship with the maximum temperature. This result suggests that the conductive heat transfer is dominant in the propagation process of the combustion zone through an iron particle cloud.     

From being diverse to becoming diverse: A dynamic team diversity theory

On the basis of the literature of open systems and team diversity, we present a new dynamic team diversity theory that explains the effect of change in team diversity on team functioning and performance in the context of dynamic team composition. Building upon the conceptualization of teams as open systems, we describe the enlargement and decline of team variety, separation, and disparity through member addition, subtraction, and substitution. Then, focusing on diversity enlargement, we theorize the contemporaneous and lasting effects of team diversity change on team performance change and on team processes and states leading to them. Dynamic team diversity theory expands the focus of team diversity research from teams' being more diverse than others to teams' becoming more diverse than before. It aims to advance team diversity research to be better aligned with the organizational reality of dynamic team composition. We also discuss methodological considerations in subsequent empirical testing of the theory and highlight how the theory and future research may help to guide organizational practice in recomposing work teams.