Relationships between anaerobic consortia and removal efficiencies in an UASB reactor degrading 2,4 dichlorophenol (DCP)

To gain more insight into the interactions between anaerobic bacteria and reactor performances (chemical oxygen demand-COD, 2,4 dichlorophenol-2,4 DCP removals, volatile fatty acid-VFA, and methane gas productions) and how they depended on operational conditions the microbial variations in the anaerobic granular sludge from an upflow anaerobic sludge blanket (UASB) reactor treating 2,4 DCP was studied. The study was composed of two parts. In the first part, the numbers of methanogens and acedogens in the anaerobic granular sludge were counted at different COD removal efficiencies. The relationships between the numbers of methanogens, the methane gas production and VFA production were investigated. The COD removal efficiencies increased to 74% from 30% while the number of total acedogens decreased to 10 from 30 cfu ml(-1). The number of total methanogens and acedogens varied between 11 x 10(3) and 10 x 10(9)MPN g(-1) and 10 and 30 cfu ml(-1) as the 2,4 DCP removal efficiencies were obtained between 60% and 99%, respectively. It was seen that, as the number of total acedogens decreased, the COD removal efficiencies increased. However, the number of total methanogens increased as the COD removal efficiencies increased. Correlations between the bacterial number and with the removal efficiencies obtained in different operational conditions were investigated. From the results presented in this paper a high correlation between the number of bacteria, COD removals, methane gas percentage, 2,4 DCP removals and VFA was observed. In the second part, methanogen bacteria in the anaerobic granular sludge were identified. Microbial observations and biochemical tests were applied to identify the anaerobic microorganisms from the anaerobic granular sludge. In the reactor treating 2,4 DCP, Methanobacterium bryantii, Methanobacterium formicicum, Methanobrevibacter smithii, Methanococcus voltae, Methanosarcina mazei, Methanosarcina acetivorans, Methanogenium bourgense and Methanospirillum hungatei were identified.     

Influence of Na2S on the degradation kinetics of CCl4 in the presence of very pure iron

This paper presents the results of kinetic studies to investigate the effect of FeS film formation on the degradation rate of CCl(4) by 99.99% pure metallic iron. The film was formed by submersing metallic iron grains in an oxygen free HCO(3)(-)/CO(3)(2-) electrolyte solution. When the grains had reached a quasi steady-state value of the corrosion potential, Na(2)S((aq)) was injected. Upon injection, a microm thick poorly crystalline FeS film formed immediately on the iron surface. Over time, the iron became strongly corroded and both the FeS film and the metallic iron grains began to crack leading to exposure of bare metallic iron to the solution. The effect of the surface film on the degradation rate of CCl(4) was investigated following four periods of aging, 1, 10, 30, and 60 days. Relative to the controls, the 1-day sulfide-aged iron showed a substantial decrease in rate of degradation of CCl(4.) However, over time, the rate of degradation increased and surpassed the degradation rate obtained in the controls. It has been proposed that CCl(4) is reduced to HCCl(3) by metallic iron by electron transfer. The FeS film is substantially less conducting than the bulk iron metal or non-stoichiometric magnetite and from the results of this study, greatly decreases the rate of CCl(4) degradation relative to iron that has not been exposed to Na(2)S. However, continued aging of the FeS film results in breakdown and stress-induced cracking of the film, followed by dissolution and cracking of the iron itself. The cracking of the bulk iron is believed to be a consequence of hydrogen embrittlement, which is promoted by sulfide. The increase in CCl(4) degradation rate, as the FeS films age, suggests that the process of hydrogen cracking increases the surface area available for charge transfer.     

单甲脒饱和蒸气压的测定和估算

用气体的法测单甲脒在１５,２５,３５和４５℃时的饱和蒸气分别为０．２０２,０．５５４６,１．９５,６．２９Ｐａ;亨利常数计算值分别为６．３０×１０＾－４,１．６７×１０＾－３,５．６８×１０＾０－３和１．７８×１０＆－２,根据Ｃｌａｕｓｉｕｓ Ｃｌａｐｅｙｒｏｎ方程求出单甲脒在常温下气化热为８９．２ｋＪ．ｍｏｌ＾－１。     

气质联用法测固定污染源中三氟甲烷、四氟甲烷、六氟乙烷和六氟化硫

建立了固定污染源排气中三氟甲烷、四氟甲烷、六氟乙烷和六氟化硫的采样和气质联用分析方法,检出限分别为0.06、0.15、0.21、0.71 mg/m3,精密度在3.2%以下,相关系数大于0.999 6,并对浙江省内2家典型企业排放的温室气体进行了监测,实际样品监测结果表明,该方法能够满足废气中4种温室气体的监测要求。     

5—(4—磺酸基苯偶氮)8—(2,4—二硝基苯氨基)喹啉测定食品中铜的研究应用

在弱碱性介质中 ,5— (4—磺酸基苯偶氮 ) 8— (2 ,4—二硝基苯氨基 )喹啉 (SPDNPAQ)与铜反应生成 2∶ 1紫红色络合物 ,体系 λmax=56 0 nm,ε=1.2 3× 10 5L· mol-1· cm-1。铜含量在 0～ 0 .4 mg/ L内符合比耳定律 ,方法用于一些生物样品和水样中铜的测定。     

碳包覆Pd/Al2O3催化剂催化4-溴苯酚加氢脱溴的活性和稳定性调控研究

在污染物液相催化加氢脱卤过程中,提高催化剂的稳定性至关重要.以水热合成法制备了不同碳包覆量的Pd/Al₂O₃@C催化剂,对催化剂进行了系列表征,并将催化剂应用于4-溴苯酚(4-BP)污染物的催化加氢脱溴反应.表征结果显示碳层提高了Pd/Al₂O₃的表面疏水性,有利于4-BP在催化剂上的吸附.并且在Pd/Al₂O₃@C催化剂的碳化过程中,碳还原部分Pd颗粒,并保留部分正价态Pd活性位,增强了4-BP中C-Br键的活化.与Pd/Al₂O₃相比,碳涂层提高了催化剂的催化活性.但当碳包覆量超过最佳包覆量后,暴露的Pd粒子随碳包覆量的增加而减少,导致活性下降.此外,碳层修饰后,催化剂的稳定性显著提高,从而大大抑制了Pd粒子的团聚和损耗.Pd/Al₂O₃@C表面的碳涂层对卤素具有较高的耐受性,从而减轻了液相催化加氢脱卤反应中活性中心的中毒.     

富氧空位/梯次结构CeO2的制备及光催化CO2还原

采用Ce-BTC(均苯三甲酸)为模板,通过尿素溶液浸渍合成了具有富氧空位/梯次结构的CeO₂催化剂,并用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、拉曼光谱(Raman)和紫外可见漫反射(DRS)等手段对其进行了表征.结果表明,与金属有机框架(MOFs)浸渍尿素高温煅烧可以获得金属氧化物/g-C₃N₄复合材料不同,Ce-BTC/尿素体系煅烧后产品中未检测到g-C₃N₄,这可能与CeO₂的存在抑制了尿素分解产物的热缩聚过程,影响了g-C₃N₄的生成有关,但尿素的引入改变了Ce-BTC煅烧产物CeO₂的氧空位浓度,且获得梯次结构.将具有富氧空位/梯次结构的CeO₂-5用于光催化CO₂还原,催化结果表明:反应4h的CO产率可达2.06μmol/g,CH₄产率可达1.42μmol/g,性能是Ce-BTC未...     

Rain‐washing of foliar deposits of Dimilin®WP‐25 formulated in four different carrier liquids

Abstract

Dimilin^® WP‐25, a wettable powder formulation of diflubenzuron (DFB) [1‐(4‐chlorophenyl)‐3‐(2,6‐difluorobenzoyl) urea], was formulated in four different carrier liquids, viz., water; a light petroleum paraffinic oil, ID 585; a heavy paraffinic oil, Sunspray^® 7N; and a 1:2 mixture of a light petroleum aromatic solvent (Cyclosol^® 63) and canola oil; to provide four end‐use mixtures, Dim‐W, Dim‐585, Dim‐7N and Dim‐Cy‐C respectively, each containing 28 g of DFB per litre. Balsam fir branch tips clipped from greenhouse‐grown seedlings, and sugar maple branch tips clipped from field‐grown young trees, were exposed to uniform‐sized droplets (ranging in diameters from 135 to 190 μm) of the four end‐use mixtures which were atomized using a monodispersed droplet generator. Droplets were collected on the fir and maple branch tips and the initial residue per g fresh weight of foliage was determined by high‐performance liquid chromatography (HPLC). The branch tips were exposed to cumulative rainfall of 3, 6 and 10 mm at an intensity of 5 mm/h and at time intervals of 1, 12, 36 and 72 h after DFB treatment, to test the influence of ‘ageing’ of foliar residues on rainfastness. Foliar samples were collected for residue determination just before the onset of rainfall, and at 0.5 h post‐rain. DFB was quantified by the HPLC method. In the case of fir foliage, the Dim‐W formulation was the most susceptible to rain‐washing and the rainfastness did not increase with the ageing period of foliar deposits. In contrast, the three oil‐based mixtures showed greater rainfastness depending upon the carrier liquid and the ageing period. Rainfastness decreased in the order of Dim‐Cy‐C > Dim‐7N > Dim‐585 > Dim‐W. In contrast, the data on maple foliage indicated that the ageing of deposits increased the rainfastness of all the 4 end‐use mixtures. Dim‐585 was the most susceptible to rain washing, and rainfastness decreased in the order of Dim‐W > Dim‐Cy‐C > Dim‐7N > Dim‐585.     

AAS与ICP－AES间接测定天然水中硫酸盐

本文以与过量形成ＢａＳＯ＿４沉淀反应为基础，较详细地讨论了反应条件、从而拟定了用ＡＡＳ和ＩＣＰ－ＡＥＳ间接测定天然水中的方法、确定了方法的精密度，ＡＡＳ法的ＲＳＤ％为１．５，ＩＣＰ－ＡＥＳ法为３．２．两种方法对比分析的结果接近，误差为１．０％（相对）。用于天然水中的测定，获得满意的结果。     

WEP的安全技术分析及对策

在对无线局域网WLAN标准IEEE80 2 .11的WEP描述的基础上 ,笔者深入研究了WEP协议的设计上和实际应用中存在的密钥序列重复使用、消息认证和完整性等严重安全漏洞 ;详细分析了标准无线局域网中WEP协议解决方案 ;提出了WEP的改进算法WEP2 ,WEP2将IV大小增加到 12 8bit,以增强抗攻击能力 ;分析了AES解决方案的可行性 ;在密钥再生与分配方面 ,提出在MAC层实现经认证的密钥交换 ,用来改善WEP的安全脆弱性等解决措施。最后 ,还对今后的研究方向作出进一步的展望