过硫酸钾溶液对测定总氮的影响

通过对过硫酸钾的配制方法,加热时的水浴温度,反应介质条件及其纯度等因素对总氮测定结果影响的讨论,提出了过硫酸钾有效的配制方法及其纯度要求,以进一步提高总氮测定的准确度.     

Removal of heavy metals from aqueous solution by sawdust adsorption

The adsorption of lead, cadmium and nicel from aqueous solution by sawdust of walnut was investigated. The effect of contact time, initial metal ion concentration and temperature on metal ions removal has been studied. The equilibrium time was found to be of the order of 60 min. Kinetics fit pseudo first-order, second-order and intraparticle diffusion models, hence adsorption rate constants were calculated. The adsorption data of metal ions at temperatures of 25, 45 and 60~C have been described by the Freundlich and Langmuir isotherm models. The thermodynamic parameters such as energy, entropy and enthalpy changes for the adsorption of heavy metal ions have also been computed and discussed. Ion exchange is probably one of the major adsorption mechanisms for binding divalent metal ions to the walnut sawdust. The selectivity order of the adsorbent is Pb（I1）~Cd（II）〉Ni（I1）. From these results, it can be concluded that the sawdust of walnut could be a good adsorbent for the metal ions from aqueous solutions.     

Copper biosorption on immobilized seaweed biomass： Column breakthrough characteristics

The biosorption of copper by the brown seaweed Sargassum baccularia,immobilized onto polyvinyl alcohol(PVA)gel beads, was investigated with fixed-bed experiments.Laboratory-scale column tests were performed to determine breakthrough curves with varying flow rates and feed concentrations.A theoretical fixed-bed model,known as the Bohart-Adams equation,was evaluated in simulating the experimental breakthrough curves.The Bohart-Adams model qualitatively predicted the breakthrough trends.PVA- immobilized seaweed biomass beads were amenable to efficient regeneration with aqueous solution containing the chelating agent ethylenediaminetetraacetic acid(EDTA).The biosorbent retained most of its original uptake capacity over three cycles of use.The excellent reusability of the biosorbent could lead to the development of a viable metal remediation technology.     

Effect of sorbed and desorbed Zn(Ⅱ) on the growth of a green alga (Chlorella pyrenoidosa)

Toxic effect of Zn(Ⅱ) on a green alga (Chlorella pyrenoidasa) in the presence of sepiolite and kaolinite was investigated.The Zn-free clays were found to have a negative impact on the growth of C.pyrenoidosa in comparison with control samples (without adding any clay or Zn(Ⅱ)).When Zn(Ⅱ) was added,the algae in the presence of clays could be better survived than the control samples,which was actually caused by a decrease in Zn(Ⅱ) concentration in the solution owing to the adsorption of Zn(Ⅱ) on the clays.When the solution system was diluted,the growth of algae could be further inhibited as compared to that in a system which had the same initial Zn(Ⅱ) concentration as in the diluted system.This in fact resulted from desorption of Zn(Ⅱ) from the zinc-contaminated clays,although the effect varied according to the different desorption capabilities of sepiolite and kaolinite.Therefore the adsorption and desorption processes of Zn(Ⅱ) played an important part in its toxicity,and adsorption and desorption of pollutants on soils/sediments should be well considered in natural eco-environmental systems before their risk of toxicity to aquatic organisms was assessed objectively.     

Adsorption removal of phosphate from aqueous solution by active red mud

Red mud is the waste of alumina industry and has high TiO_2 and Fe_2O_3 content which are active components for the adsorption of anion pollutants.In this study,the uptake of phosphate by red mud activated by heat treatment and acid-heat treatment was investigated. The factors influencing the adsorption were also investigated.The result showed that the red mud sample treated using acid-heat method at 80℃with 0.25 mol/L HC1 for 2 h achieved the highest phosphate removal.For the heat-activated red mud,the sample heated at 700℃for 2 h preformed better than the other heat treatment.Phosphate removal by the activated red mud was significantly pH dependent,and pH 7 was the optimal pH for phosphate removal.The adsorption fits Langmuir isotherm model well and the maximum adsorption capacities of the acid-heat activated red mud and the heat activated samples were 202.9 mgP/g and 155.2 mgP/g,respectively.     

Preparation1 and utilization of wheat straw anionic sorbent for the removal of nitrate from aqueous solution

In order to reduce the impact of eutrophication caused by agricultural residues (i.e. excess nitrate) in aqueous solution, economic and effective anionic sorbents are required. In this article, we prepared anionic sorbent using wheat straw. Its structural characteristics and adsorption properties for nitrate removal from aqueous solution were investigated. The results indicate that the yield of the prepared anionic sorbent, the total exchange capacity, and the maximum adsorption capacity were 350%, 2.57 mEq/g, and 2.08 mmol/g, respectively. The Freundlich isotherm mode is more suitable than the Langmuir mode and the adsorption process accords with the first order reaction kinetic rate equation. When multiple anions (SO42-, H2PO4-, NO3-, and NO2-) were present, the isotherm mode of prepared anionic sorbent for nitrate was consistent with Freundlich mode; however, the capacity of nitrate adsorption was reduced by 50%. In alkaline solutions, about 90% of adsorbed nitrate ions could be desorbed from prepared anionic sorbent. The results of this study confirmed that the wheat straw anionic sorbent can be used as an excellent nitrate sorbent that removes nitrate from aqueous solutions.     

基于散流器的盐雾箱饱和加湿技术研究

目的 提升盐雾箱饱和加湿桶湿式加热性能，保证盐雾试验过程沉降盐雾溶液浓度的稳定，进行盐雾试验箱饱和加湿桶的设计与研究。方法 对饱和加湿桶压缩空气入口和出口进行结构设计，入口采用散流器实现湿式加热，出口设置气水分离器，对出口气流进行气水分离，从而形成较为“洁净”的饱和湿空气。对饱和加湿桶进行性能测试，验证盐雾试验箱饱和加湿方法的有效性。结果 散流器可以使气流在水中形成稳定的流动，有效抑制气流直通液面的浪涌现象，避免液滴飞溅产生，并增大了压缩空气与去离子水的接触面积。供气压力为50~150 kPa时，饱和加湿桶出口气流的相对湿度在不同温度下均可达到83%~90%，且试验过程出口流道无明水喷射。结论 通过对饱和加湿桶的设计，有效提升了湿式加热的效率，并形成较为“洁净”的饱和湿空气，满足盐雾试验要求。