Effect of initial temperature on the explosion pressure of various liquid fuels and their blends

In this work, the effect of initial temperature on the explosion pressure, P_ex, of various liquid fuels (isooctane, toluene and methanol) and their blends (isooctane-toluene and methanol-toluene, with three different fuel-fuel ratios) was investigated by performing experiments in a 20-l sphere at different concentrations of vaporized fuel in air. The initial temperature was varied from 333 K to 413 K.Results show that, as the fuel-air equivalence ratio, Φ, is increased, a transition occurs from a “thermodynamics-driven” explosion regime to a “radiant heat losses-driven” explosion regime. The maximum pressure, P_max, is found in the former regime (Φ < 3), which is characterized by a trend of decreasing P_ex with increasing initial temperature. This trend has been explained by thermodynamics. In the latter regime (Φ > 3), P_ex increases with increasing initial temperature. This trend has been addressed to the decrease in emissivity (and, thus, radiant heat losses) with the increase in temperature.     

分散固相萃取/高效液相色谱法测定土霉素菌渣中土霉素的残留量

文章拟建立一种从土霉素菌渣中提取并检测土霉素残留量的高效液相色谱法。用甲醇和冰乙酸作为提取剂提取样品,用分散固相萃取的方法净化样品,净化药剂为石墨化碳黑(GCB)和C18。通过加标回收实验,用高效液相色谱仪检测样品中土霉素含量。选用的色谱柱为PLRP-S,流动相为甲醇和0.05 mol/L草酸,两者比例为35:65(V:V)。检测波长为355 nm,柱温30℃。经检测,土霉素在0.1~2 000 mg/L范围内线性相关系数大于0.999,线性良好。1.0,4.0及8.0mg/g 3个加标水平的土霉素平均回收率范围是80.85%~109.59%,相对标准偏差(RSD)为2.45%~6.38%。土霉素菌渣中土霉素残留量平均为4.741 mg/g。实验表明,该方法具有简单、方便、快速、准确性强、灵敏度高的特点,可以应用于土霉素的分析检测。     

Polymer and invert emulsifying oil effects upon droplet size spectra of sprays

Abstract

A series of wind tunnel atomization studies were carried out to investigate the effects of polymer and invert suspension oil “drift control adjuvants” upon the droplet size distribution spectra produced by nozzles typically used in aerial and ground based spraying of pesticides. A D8–46 disc and core was used as a typical aerial application nozzle, and an 8003 fan nozzle was used for the ground based sprayers simulation. The droplet size spectra were evaluated in a wind tunnel using a Malvern 2600 laser particle size analyzer immediately upon mixing and at 15 minutes after re‐circulation through a pumping system. The addition of the polymer‐based adjuvants significantly increased the droplet size spectra parameters of the spray cloud, but all the polymer products showed signs of breakdown of their molecular arrangements in the liquid medium, as a result of agitation. The invert suspension oil adjuvant did not change the droplet size spectra markedly, nor did it show signs of breakdown of the internal liquid structure after re‐circulation.     

Numerical simulation of evaporation of volatile liquids

The paper presents the results of the validation of the developed pool evaporation model using literature and our own experimental data. The proposed model was used to examine the effect of wind velocity and pool sizes on the evaporation rate of volatile liquid (hexane). Contrary to the semi-empirical evaporation model widely used in hazard assessment, stronger dependence of evaporation rate on pool size at low wind speeds is obtained.     

Fire accident investigation of an explosion caused by static electricity in a propylene plant

This study investigated a 2010 fire and explosion that occurred at a polypropylene (PP) and copper-clad laminate high-tech plant in Taiwan. Liquid acetone leakage caused the fire and explosion. One person was killed and five were injured; property damage was estimated at US$20 million. In contrast to conventional plants, high-tech plants have sophisticated instrumentation, highly complex pipelines, and confined spaces. In addition, the floor area in a high-tech plant is large and frequently contains a channel through the ground floor to the second or third floor. This channel design enables the fire compartment to be destroyed. Therefore, the system cannot confine the fire to a specific area, thus hindering fire-relief operations. In this study, the original fire outbreak occurred in the PP processing area on the ground floor. The acetone storage tank was located on the third floor. The investigation conducted at the fire site of the situations of the burning (bursting) loss determined that the acetone liquid leaked and dripped from floor cracks and tunnel oven to the PP processing area. Because the PP manufacturing process rapidly generates static electricity, the flammable liquids made contact with the source of ignition, which caused the explosion and fire. Various procedures, such as those involving the operating environment of production, packaging, and processing in a high-tech plant, are likely to produce static electricity in a workplace. Improved electrostatic management can prevent the loss of property and lives, liquid acetone leakage, and loss of equipment caused by static electricity fire.     

液/液界面电化学及在环境监测分析中的应用

介绍了液/液界面电化学四种基本结构和主要实验方法,综述了液/液界面电化学分析方法在环境监测分析中的应用。作为一种新方法测定离子载体及能与其形成络合物的金属离子组分的浓度,它具有简便、快捷、经济实用等特点。     

高效液膜分离富集测定微量铜

应用高效乳状液膜技术分离、富集水和土壤样品中微量铜（Ⅱ）．研究了流动载体（Ｐ２０４）、表面活性剂（ＳＰａｎ８０）、膜的增强剂（液体石蜡）、膜溶剂（煤油）和内相解吸剂（２．５ｍｏｌ／ＬＨ２ＳＯ４）等液膜体系，对分离富集微量铜（Ⅱ）的影响．确定了Ｓｐａｎ８０—Ｐ２０４─液体石蜡─煤油─Ｈ２ＳＯ４高效液膜体系的最佳组成和最适宜的实验条件．富集后的溶液用１－（２－吡啶偶氮）－２－萘酚（ＰＡＮ）分光光度法测定铜（Ⅱ）．用本法富集水和土壤中微铜（Ⅱ）．回收率在９９％以上。应用于测定水和土壤中的微量铜．相对标准偏差为１．２％～４．５％。     

铜合金坯饼表面处理废水治理研究

介绍了沈阳造币厂用特制的除重金属及CODcr的药剂处理铜合金表面处理废水的方法。通过工程运行 ,取得满意的效果。     

Catalytic conversion of waste tyres into valuable hydrocarbons

Tyre recycling has become a necessity because of the huge piles of tyres that represent a threat to the environment. The used tyres represent a source of energy and valuable chemical products. Waste tyres were pyrolysed catalytically in a batch reactor under atmospheric pressure. Calcium carbide was used as a catalyst to explore its effect on pyrolysis product distribution. The effect of temperature, amount of catalyst and time on the yields of the pyrolysed products was investigated. Char yield decreased with increase of pyrolysis temperature while total gas and liquid yields increased. The liquid fraction was obtained with boiling point up to 320 °C. The physical and chemical properties of the pyrolysed products obtained were characterized. The catalytic pyrolysis produced 45 wt.% aromatic, 35 wt.% aliphatic and 20 wt.% of polar hydrocarbons. The distillation data showed that ∼80% of oil has boiling point below 270 °C which is the boiling point for 50% of distilled product in commercial diesel oil. The oil fraction was found to have high gross calorific value; GCV (42.8 MJ kg⁻¹). Its Specific gravity, viscosity, Kinematic viscosity, freezing point and diesel index were also within the limits of diesel fuel. The char residues were studied to investigate their characteristics for use as a possible adsorbent. Surface area of char before and after acid demineralization was determined to determine the adsorptive features for waste water treatment.     

重大危险源区域事故应急非结构化模糊决策应用研究

针对目前我国应对重大危险源突发事故的管理和决策主要依赖于相关领导或专家掌握的知识及经验的现状,将非结构化模糊决策方法(Non-structural Fuzzy Decision Method,NSFDM)和事故后果模拟方法相结合,以区域范围内受重大危险源潜在事故影响的企业为决策对象,以减小事故影响范围,降低事故严重程度为目标,建立起重大危险源区域事故应急决策的多准则决策方法,以期帮助安监职能部门优化配置应急救援资源,提高应急响应绩效,减少国家和人民的经济和财产损失。以广州市某公司丙烷储罐区为实例,在对其进行沸腾液体扩展蒸气爆炸(Boiling Liquid Expanding Va-por Explosion,BLEVE)事故模拟的基础上,运用非结构化模糊决策方法,对该丙烷储罐区BLEVE事故的处理,提供了应急决策支持。