生物表面活性剂合成条件的优化及提取方法

利用油平板筛选法和排油圈法从辽河某油田的土壤样品中分离筛选高效的生物表面活性剂产生菌, 通过16S rRNA基因序列分析对所筛选菌株进行鉴定。采用L16(45)正交实验对所筛选菌株合成生物表面活性剂的条件进行优化。比较5种提取方法对发酵液中生物表面活性剂的提取效果。共分离得到17株菌,其中菌株A3、As和Y产表面活性剂的能力最强。16S rRNA基因序列分析表明,这3株菌均为假单胞菌属(Pseudomonas)。菌株A3、As、Y和 A3-As混合菌的生物表面活性剂提取量较优化前有明显的提高,其产量分别是优化前的8.4倍、6.4倍、5.6倍和5.7倍,其中,菌株As的生物表面活性剂产量最高,可达20.55 g/L。对于3种纯菌和A3-As混合菌而言,5种提取方法中均以CHCl3萃取的量最高;而对其他混合菌,5种提取方法的差别并不显著。菌株A3、As、Y均属于高效的生物表面活性剂产生菌,具有很好的应用前景。     

固相萃取-UPLC-MS/MS法测定环境水体中多种抗生素

采用固相萃取-超高效液相色谱串联质谱法测定环境水样中25种磺胺类和喹诺酮类抗生素,通过优化试验条件,使方法在2.00μg/L～200μg/L范围内线性良好,方法检出限为1.01ng/L～2.85ng/L,7次测定结果的RSD为2.3%～8.0%。将该方法用于自来水和地表水测定,结果均为未检出,高、低质量浓度水平的加标回收率为61.2%～102%。     

HPLC-三重四级杆质谱法测定医疗废水中抗生素残留

采用固相萃取/高效液相色谱-三重四级杆质谱法同时测定医疗废水中的20种超痕量抗生素残留,通过优化试验条件,使方法在100μg/L～100μg/L范围内线性良好,方法检出限为024ng/L～122ng/L。空白水样和实际水样3个质量浓度水平的加标回收率分别为80.2%～108%和75.8%～114%,6次测定结果的RSD分别为2.4%～8.4%和1.7%～8.1%。将该方法用于测定重庆市2家三甲医院医疗废水中的超痕量抗生素残留,结果有11种抗生素检出,其余均为未检出。     

新化矿区煤矸石中微量元素赋存形态及浸出特征

利用BCR连续提取法和浸泡实验,对贵州省新化煤矿区不同风化程度的煤矸石中微量元素As、Cd、V、Zn、Co、Cr、Cu、Ni、Pb的赋存形态及浸出浓度进行研究。赋存形态研究结果表明:在煤矸石中As和Cd元素主要以酸溶态、可还原态和可氧化态形式赋存,而其他微量元素V、Zn、Co、Cr、Cu、Ni、Pb主要以残渣态形式赋存;除了V元素的赋存形态含量百分比不受煤矸石风化程度影响外,其它微量元素的赋存形态的含量百分比均会受到煤矸石风化程度的影响。煤矸石的浸出实验表明:浸泡时间是影响煤矸石中微量元素释放的一个重要因素;在浸泡过程中,大部分微量元素在浸泡前期的浸出浓度受煤矸石风化程度的影响,Zn和Cu元素则是在整个浸泡过程的浸出浓度均受到煤矸石风化程度的影响;不同粒径大小的煤矸石在浸泡过程中,除微量元素As和Co的浸出浓度不受煤矸石粒径大小的影响,其他微量元素在浸泡前期和中期的浸出浓度均与煤矸石的粒径大小呈反比。     

络合萃取技术在苯胺-硝基苯废水处理中的应用研究

选用20％三烷基胺 80％加氢煤油作为萃取荆，进行四级萃取实验，探讨络合萃取技术处理苯胺-硝基苯废水工业化的可能性。实验结果表明，采用三烷基胺一加氢煤油混合溶剂对苯胺-硝基苯废水进行萃取，具有相当高的COD去除率。     

土壤中硫的形态分析及其测定方法研究进展

本文对土壤中硫的形态分析与测定方法,从无机硫,有机硫,总硫,以及硫的系统分析方法,硫的检测几个方面进行了综述,对各种方法进行了客观的评价,指出了尚待于解决的问题,并对今后的研究进行了展望。     

城市污泥好氧堆肥过程中重金属的形态变化

污泥中重金属的含量和各重金属的生物有效性是污泥农业利用的重要限制因素.本研究对城市污泥进行了堆肥化处理,并采集不同阶段样品,通过顺序浸提法对样品中不同形态的重金属进行提取,分别利用原子吸收分光光度计测定Zn、Cu、Ni、Pb、Cd含量、分光光度法测定Cr和As含量.研究结果发现,与现有国际及我国污泥农用标准比较,所研究污泥中重金属含量均未超过允许的水平.污泥堆肥中Cu、Ni、Cd、Cr主要以残渣态形式存在,Cu、Ni、Pb、Cd四种重金属元素的可氧化态含量也相对较高,除Cd外,经过堆肥化处理后所有重金属的有效态含量均呈下降趋势,因此,堆肥可以促进污泥中的重金属稳定化,降低土壤的污染风险.     

Concentrations and chemical forms of potentially toxic metals in road-deposited sediments from different zones of Hangzhou, China

The 25 road-deposited sediments were collected from five different land-use zones (industrial, residential, commercial, park, and countryside) in Hangzhou, China. The concentrations of metals (Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn) in these samples were determined using the ICP-AES after digestion with the mixture of HNO3-HF-HCl (aqua regia), and chemically fractionated using the modified BCR (the European Community Bureau of Reference) sequential extraction procedure. The highest metal concentration level was detected in the sample from industrial zone and commercial zone having heavy traffic. While the lowest metal level was noted in the street dust sample from residential zone, park, and countryside zone. The mobility sequence based on the sum of the BCR sequential extraction stages was: Zn (80.28%), Pb (78.68%), Cd (77.66%) ＞ Cu (73.34%) ＞ Mn (67.92%) ＞ Co (41.66%) ＞ Ni (30.36%) ＞ Cr (21.56%), Fe (20.86%). Correlation analysis and principal component analysis were applied to the data matrix to evaluate the analytical results and to identify the possible pollution sources of metals. Factor analysis showed that these areas were mainly contaminated by three sources, namely lithology, traffic, and industry.     

Comparison of Soil Extraction Isotherms of Soil Samples Saturated With Nonpolar Liquids

In multiphase systems capillary pressures play a significant role on fluid movement and retention. The facility to predict the effect of different thermal remediation strategies requires the knowledge of the effect of temperature on capillary pressure-saturation relationships in the soils. The objective of recent study was (a) to develop a technique for routinely measuring the pressure-saturation curves of soil samples saturated with a nonpolar liquid at different regulated temperatures (b) to build a database using the measured pressure-saturation curves and the physical, chemical properties of the model soils (c) to establish the dependence of nonaqueous phase liquid retention on the soil properties and the temperature. The retention curves (extraction isotherms) with nonaqueous phase liquid were determined using a modified pressure plate extractor. The wetting phase was a non-aromatic hydrocarbon distillation product. Pressure plates were designed and constructed in the laboratory of our department. The temperature was held constant at 20, 40 and 60 ^∘C. Statistical analysis was performed involving selected soil parameters and the measured nonaqueous phase liquid retention data. The results show that knowing some easily measurable soil parameters (bulk density, particle size distribution, humus and lime content) we can estimate the nonaqueous phase liquid retention of the soils. The measured “extraction isotherms” provide essential information about the temperature-dependency of pressure-saturation curves.     

Effects of Acid Rain on Competitive Releases of Cd, Cu, and Zn from Two Natural Soils and Two Contaminated Soils in Hunan, China

Leaching experiments of rebuilt soil columns with two simulated acid rain solutions (pH 4.6–3.8) were conducted for two natural soils and two artificial contaminated soils from Hunan, south-central China, to study effects of acid rain on competitive releases of soil Cd, Cu, and Zn. Distilled water was used in comparison. The results showed that the total releases were Zn>Cu>Cd for the natural soils and Cd>Zn≫Cu for the contaminated soils, which reflected sensitivity of these metals to acid rain. Leached with different acid rain, about 26–76% of external Cd and 11–68% external Zn were released, but more than 99% of external Cu was adsorbed by the soils, and therefore Cu had a different sorption and desorption pattern from Cd and Zn. Metal releases were obviously correlated with releases of TOC in the leachates, which could be described as an exponential equation. Compared with the natural soils, acid rain not only led to changes in total metal contents, but also in metal fraction distributions in the contaminated soils. More acidified soils had a lower sorption capacity to metals, mostly related to soil properties such as pH, organic matter, soil particles, adsorbed SO₄ ²⁻, exchangeable Al³⁺ and H⁺, and contents of Fe₂O₃ and Al₂O₃.