除尘器灰斗电加热器供配电节能降耗方案优化

对目前广泛使用的除尘器灰斗电加热器的供配电系统进行了分析,提出了电控设备投资更省、供配电系统运行更节能经济的优化方案,并通过工程实例进行了分析验证。     

HPLC-MS/MS测定城市废水中的10种药物与个人护理用品

采用固相萃取技术对水样进行预处理,结合液相色谱-串联质谱分析方法(HPLC-MS/MS),建立了同时检测城市废水中包括扑热息痛、萘普生、磺胺甲恶唑、磺胺二甲嘧啶、三氯生、双氯芬酸钠、三氯卡班、盐酸四环素、盐酸土霉素、吉非罗平在内共计10种药物与个人护理用品(PPCPs)的分析检测方法。采用中性条件萃取水样,控制上样流速为3—5 mL?min~(–1),用甲醇溶液洗脱。纯水的平均加标回收率为40.8%—104.5%,相对标准偏差为5.0%—25.5%(n=3)。应用所建立的分析方法,对西安浐河表层水进行了分析。结果表明:该方法可用于城市废水PPCPs的检测。10种目标物质中,共检测到4种,其含量为1.4—15.0 ng?L~(–1)。     

酸浸—萃取—沉淀法回收废锂离子电池中的钴

采用酸浸—萃取—沉淀法回收废锂离子电池中的钴。实验结果表明:废锂离子电池在600℃下煅烧5 h可将正极材料上的有机黏结剂与正极活性物质分离;正极活性物质在Na OH溶液浓度为2.0 mol/L、n(Na OH)∶n(铝)=2.5、碱浸温度为20℃的条件下碱浸反应1 h后,铝浸出率达99.7%;已除铝的正极活性物质在硫酸浓度为2.5 mol/L、H_2O_2质量浓度为7.25 g/L、液固比为10、酸浸温度为85℃的条件下酸浸反应120 min,钴浸出率高达98.0%;酸浸液在p H为3.5、萃取剂P507与Cyanex272体积比为1∶1的条件下,经2级萃取,钴萃取率为95.5%;采用H_2SO_4溶液反萃后在硫化钠质量浓度为8 g/L、反萃液p H为4的条件下沉淀反应10 min,钴沉淀率达99.9%。     

同时脱硫脱硝固态反应剂研究进展

针对于干法同时控制热力发电厂NO_x和SO_2的排放,综述了近年来研究较广泛的钙基吸收剂、改性活性炭吸收剂、γ-Al_2O_3吸收-催化剂、天然锰矿石反应剂等几种同时脱硫脱硝固态反应剂的结构特性,以及脱硫脱硝效率。根据这几种固态反应剂的研究现状指出了应更进一步对氮氧化物和硫氧化物在同时脱除时的相互影响进行研究,从而提高同时脱硫脱硝效率。     

Determination of Commonly Used Herbicides in Surface Water Using Solid-Phase Extraction and Dual-Column HPLC-DAD

The present study describes the application of different solid-phase extraction techniques for the extraction, separation, and quantitative determination of 10 commonly used herbicides with different chemical structures (chlorsulfuron, diuron, bentazone, linuron, chlorpropham, fenoxoprop-ethyl, MCPA, diclofop-methyl, fluazifop-butyl, trifluraline) in water. Octadecyl (C₁₈) Empore extraction disks, octadecyl (C₁₈), and stryene divinylbenzene (SDB) Bond Elut Env cartridges were compared for solid-phase extraction efficiency. Herbicides were separated and quantified by reversed-phase high performance liquid chromatography with diode-array detection (HPLC-DAD) with simultaneous separation on two columns of differing polarity (C₁₈ and CN) to confirm identification. Analytical separation was performed simultaneously on C₁₈ and CN columns. Reanalysis of the sample extracts on a (cyano) CN column were used to confirm the identity of these compounds. Method optimization and validation parameters were presented in this work. Recoveries varied from 76.0% to 99.0% for C₁₈ disks, from 75.1% to 100.0% for C₁₈ cartridges, and from 54.0% to 98.0% for SDB cartridges over concentrations at 0.025–0.4 μg L^?1. The limits of detection were 0.012–0.035 μg L^?1.     

The velocity of DNAPL fingering in water-saturated porous media: laboratory experiments and a mobile–immobile–zone model

Dense nonaqueous phase liquids (DNAPLs) are immiscible with water and can give rise to highly fingered fluid distributions when infiltrating through water-saturated porous media. In this paper, a conceptual mobile–immobile–zone (MIZ) model is presented to describe the structure of a DNAPL finger in water-saturated porous media and the velocity of finger propagation. A finger is composed of a finger body and a tip. The finger body has a mobile core and an immobile sheath. All the DNAPL within the tip of a finger is mobile. Lab experiments utilizing image analyses of a DNAPL (PCE) penetrating into water-saturated homogeneous glass beads were carried out in a two-dimensional transparent chamber. The results show that the fingers elongated almost linearly with time. The fingers did not grow laterally after the tip of the finger had passed. The average finger diameters were between 3.9 and 5.4 mm for PCE propagation in water-saturated glass bead porous media with mean particle diameters from 0.32 to 1.36 mm. The estimated mobile core diameters were 51–60% of the average finger diameters.     

Environmental and economic benefit of recycling model of packaging waste: a case study on aluminum

Abstract

In order to achieve sustainable utilization of natural resources, save energy and protect environment and ecosystem, it is important for a region or a nation to develop and implement a viable waste recycling model from both theoretical and practical point of view. Some packaging recycling models operated in developed countries are introduced in this article. Aluminium can recovery and recycling is emphasized. Cost effective, economic and environmental benefit of different models are compared and analyzed. The result shows that all recycling models have their characteristics due to the initial purpose of recovery and the situation of the implementing country. However, all the models contribute to the reduction of municipal solid waste disposal and resources conservation.     

Determination of Cd,Cr, Cu,Pb and Zn from various water samples with use of FAAS techniques after the solid phase extraction on rice bran

A facile and novel method has been developed for the determination of cadmium, chromium, copper, lead, and zinc from various water samples using FAAS. In the present investigation, a syringe was loaded with sorbent (rice bran) for the separation and enrichment of cadmium, chromium, copper, lead, and zinc, prior to their analysis by flame atomic absorption spectrometry which was described to substitute the batch and column techniques. The syringe was loaded with 2.0 g of sorbent in order to retain the analyte elements. Six milliliter of sample solution (pH 8.0 ± 0.2) was drawn into the syringe in 15 s and discharged over a period of 15 s. Then, 2.0 M HCl eluent was drawn into the syringe and ejected back to desorb the analyte elements. At the optimum conditions, the percentage recoveries of Cd, Cr, Cu, Pb, and Zn was in the range of 95.5–99.4% with SD of 0.10%. The elements could be concentrated by drawing and discharging several portions of sample successively. The detailed study of various interferences made the confirmation of the method highly selective. The risk of contamination is less than that with the column technique. The method was successfully applied for the determination of Cd, Cr, Cu, Pb, and Zn in spiked and natural water samples. The results obtained are in good agreement with the reported methods at the 95% confidence level.     

The legacy of surface mining: Remediation,restoration, reclamation and rehabilitation

Surface mining is a global phenomenon. When dealing with the land disturbances caused by surface mining operations, the terms remediation, reclamation, restoration and rehabilitation (R4) are commonly used interchangeably or otherwise vaguely defined. Expectations associated with these terms may differ significantly from one stakeholder to another, however. Regulators, industry, environmental practitioners, local communities and the general public therefore stand to benefit from a precise terminology based on agreed-upon end-goals. The latter range from the avoidance of exposure to pollutants (remediation) to the full recovery of the original ecosystem (restoration). Although frequently claimed as the end-goal, restoration may often not be unachievable, because of altered hydrology, habitat fragmentation, contamination, climate change, prohibitive costs and other environmental and socio-economic boundary conditions. Mostly, the definitions of reclamation and rehabilitation may overlap in their definitions and approaches. Here we attempt the creation of a road-map that can clearly translate end-goals for each of the R4 terms. According to the definitions encountered and exposed here, reclamation, which aims to recover key ecosystem services and biogeochemical functions within a replacement ecosystem or rehabilitation, which implies a repurposing of the landscape, may be the best approaches to deal with surface mining legacies.     

台北市生活垃圾管理经验及启示

台北市生活垃圾管理效果显著,人均生活垃圾日清运量年均减量7.3%、资源回收率年均增长28.3%并带动资源回收产业发展、居民负担仅为1998年的22.0%、社会成本较1998年减少30.7%。主要经验包括:明确的生活垃圾减量与资源回收目标;系统的管理模式设计,包括政府(环保局、地方清洁队、资源回收管理基金)、生产商、回收商、处理商、居民、垃圾焚烧厂和填埋场以及第三方等主要干系人。采取的主要政策手段包括强制源头分类、随袋征收垃圾处理费、建立资源回收管理基金、对资源回收行业的政策扶持以及信息公开与公众参与等。台北市先进的生活垃圾管理经验对中国大陆城市开展垃圾分类与资源化管理具有重要的参考价值。