固定床电化学反应器处理含铜废水研究

砩用一维反应器模型设计的固定床电化学反应器,对模拟含铜离子废水的处理进行了研究。实验表明,该反应器可用于处理含低铜离子废水,处理后既可回收有用Ｃｕ,又可使废水达到国家排放标准（≤１０＾－６）。讨论了Ｃｕ＾２＋的进口浓度、操作温度、操作电压、流体流速、处理注入电导率及反应器填充材料对处理过程的影响。依据实验室的操作对该处理过程进行了初步经济估价。     

达索普冰芯中现代环境信息记录

１９９６－０７－０８,中美联合考察队成功地考察了希夏邦马地区达索普冰川,并提出了一支２０ｍ长的冰芯,这支冰芯是迄今为止世界上海拔最高的冰芯。对资料分析发现离子含量变经显示强烈的周期性变化,反映了季节变化的特征。离子浓度高低变化将指示气候的冷暖变化,并与δ＾１８Ｏ存在着对应关系,     

重金属离子对凡纳滨对虾鳃丝Na+-K+-ATPase活力的影响

研究了3种重金属离子(Cu2 、Zn2 、Cd2 )对凡纳滨对虾(Litopenaeusvannamei)鳃丝Na K ATPase活力的影响。结果表明:3种重金属离子对凡纳滨对虾鳃丝Na K ATPase活力的影响显著(p<0.05)而对照组变化不显著(p>0 05)。除0.05mg/LCd2 处理组凡纳滨对虾鳃丝Na K ATPase活力在实验时间内均表现为显著促进作用外,3种重金属离子低浓度组在短时间内对Na K ATPase活力出现暂时的激活现象,至24h后同高浓度组一样,随作用时间Na K ATPase活力逐渐降低,表现为显著性抑制的剂量效应关系。     

石墨基复合材料负载零价纳米铁吸附重金属离子的研究进展

工业废水中重金属的存在威胁着环境和人类健康,有效去除环境中的重金属离子具有重要意义.论文简要介绍了近年来石墨基复合材料负载纳米零价铁(nZVI)去除废水中重金属离子的研究,探讨了多种石墨基负载nZVI复合材料对重金属离子的吸附特性和环境条件对吸附性能的影响因素,并对其未来的研究和应用进行了总结和展望.     

华南地区大气气溶胶中EC和水溶性离子粒径分布特征

利用1988~2010年在华南地区广州、深圳、海口等多地采得的126组样品,初步分析了华南地区不同时段不同地区和水溶性离子成分的浓度变化及其粒径分布特征.结果表明:各站的AEC(等效元素碳)浓度和水溶性无机离子浓度差异较大,Na+和Cl-基本表现为海岛站点>海岸站点>乡村站点>城市站点,其余主要离子成分和AEC则表现为城市站点>乡村站点>海岸站点>海岛.城市站点、乡村站点、海岸站点和海岛站点AEC质量浓度在不同年段随粒径分布的变化趋势比较一致的,基本呈双峰结构,主峰主要位于0.43~0.65mm,次峰主要位于4.7~5.8mm.根据各离子的粒径分布的相似性可以将各种离子的垂直分布形态分为3类:二次离子(SO42-、NO3-和NH4+)呈现明显的三峰分布形态;F-、Ca2+、Mg2+、Na+和Cl-呈双峰分布形态;K+和AEC呈单峰分布形态,主峰位于细粒子模态.各成分浓度随高度的变化则呈现不同的变化规律.降水对气溶胶粒子的清除作用是显著的,尤其是粒径大于1μm的颗粒,而1.1~2.1μm的粒子段是降水清除的关键区.局地污染中,AEC质量浓度随粒径的分布呈现出了很明显的“单峰”结构,且主要集中在次微米段粒径范围内.     

香河夏季PM2.5水溶性无机离子组分特征

2013年6月在中科院香河观测站对大气气溶胶化学组分特征进行研究.对PM2.5和PM10质量浓度进行在线监测,结果表明,观测期间PM2.5和PM10质量浓度均值与方差分别为(151.78±82.48)μg/m3和(250.47±106.99)μg/m3;SNA(SO42-、NO3-、NH4+)占PM2.5质量浓度的44.8%,且大多富集在粒径0.5~2.5μm的细颗粒物中.硫氧化率(SOR)、氮氧化率(NOR)平均值分别为0.35、0.31,SO2主要通过非均相的氧化反应转化为SO42-,NOx主要通过白天光化学反应转化为NO3-;灰霾和轻雾天较高的SOR和NOR表明,灰霾和轻雾天相比于清洁天有较多的SO2、NOx转化为SO42-、NO3-.气流后向轨迹分析表明灰霾和轻雾天空气质量受经过河北、山东及江苏北部气流影响.     

水合物法海水淡化脱盐效率研究

采用水合物生成装置分别加入二氧化碳和甲烷气体通过水合物法进行2组海水淡化实验。每组实验分别提取3次不同反应时间的水合物晶体,检测水合物中Na+、Mg2+、K+、Ca2+、B3+的离子浓度。结果表明:CH4水合物形成过程中,盐离子的脱盐效率与离子半径和所带电荷量呈线性相关性。CO2水合物生成实验中,由于Ca2+与CO2-3反应生成Ca CO3颗粒,故Ca2+离子浓度变化与离子半径和电荷量呈非线性关系。同时提出更全面的水合物法海水淡化中盐离子的排斥机制。较于反渗透传统方法,水合物法具有脱硼效果好的优势。     

Uncertainties in a risk management context in early phases of offshore petroleum field development

The current risk management approach for the Norwegian offshore petroleum industry came into effect in 2001 and has been stable with minor changes for 15 years. Relatively few new installations were slated for development until quite recently, and several new projects have been started in the last few years. The paper considers the risk management approach in the pre-FEED phase and builds on two case studies selected from the most recent cases. These case studies have been evaluated with respect to how uncertainties are considered in the early phase, based on the submission of the Plan for Development and Operation, their evaluations by authorities and the supporting documents. Both case studies involve new concepts for which there is no experience from similar environments and/or water depths. In spite of what could have been expected, the case studies conclude that uncertainties have not been in focus at all during concept development. This appears to be definitely the case for the licensees, but also to be the case for the authorities. Some suggestions are presented for what could have been considered by the licensees and authorities.     

Major accident management in the process industry: An expert tool called CESMA for intelligent allocation of prevention investments

A tool (called CESMA) was developed to carry out cost–benefit analyses and cost-effectiveness analyses of prevention investments for avoiding major accidents. A wide variety of parameters necessary to calculate both the costs of the considered preventive measures and the benefits related with the avoidance of accidents were identified in the research. The benefits are determined by estimating the difference in (hypothetical) major accident costs without and with the implementation of a preventive measure. As many relevant costs and benefits as possible were included into the tool, based on literature and expert opinion, in order to be able to deliver an all-embracing cost–benefit analysis and cost-effectiveness analysis to assist in the investment decision process. Because major accidents are related to extremely low frequencies, the tool takes the uncertainty of the unwanted occurrence of a major accident into account through the usage of a so-called ‘disproportion factor’. Compared with existing software, the CESMA tool is innovative by striving for an as-accurate-as-possible picture of costs and benefits of major accident prevention, and taking the uncertainties accompanying disastrous events into consideration. Furthermore, an illustrative example of CESMA is presented in the paper.     

北京市2009年8月大气颗粒物污染特征

为研究2008年8月北京奥运会1a之后北京市大气颗粒物的污染特征,于2009年8月对北京市大气颗粒物PM10、PM2.5样品进行采集,测量其质量浓度并对其中的水溶性离子组分进行分析.研究发现2009年8月北京市大气颗粒物PM10、PM2.5质量浓度日均值分别为176.9μg/m3和102.5μg/m3.PM10质量浓度比2008年观测值上升了180%,比2007年降低了10%; PM2.5质量浓度比2008年观测值上升了126%,比2007年上升了31%.水溶性离子是大气颗粒物的重要组分,分别占PM10和PM2.5质量浓度的43%和61%.对比发现,污染天气条件下PM2.5/PM10和NO3-/SO42-比值升高,移动源是北京地区主要的污染物来源.风向风速和降水等天气条件对颗粒物质量浓度有很大影响,其中0.5~1.0m/s的东南风条件下大气颗粒物污染最为严重.