环境权益及其市场化代理制度

提出了一个以新制度经济学方法分析环境问题及其控制方式的理论模型,并据此提出了当前环境保护工作实现制度创新的思考,其逻辑思路是：由环境资源的稀缺性引起的用于满足人类生存需要和生产需要这两种环境功能之间的矛盾,外化为人类生存性和生产性两型环境权益的冲突;解决这个冲突的两种制度安排─市场和政府─都存在着各自的“失灵”,因此,需要设计和实施一种使两者结合起来的更高形式的制度安排,途径之一是建立和实施以“法律框架、公众参与、代理公司”为要素的“环境权益之市场化代理制度”。当前我国环境保护工作正面临着这种制度创新的契机。     

AB法工艺在河东污水处理厂的应用

乌鲁木齐河东污水处理厂采用AB活性污泥工艺 ,设计处理污水 2 0× 10 4 m3 d ,于 1997年 7月投入运行 ,至今运行状况良好。本文介绍了该工程的工艺流程、设计参数、主要处理构筑物和运行情况 ,对运行中出现的问题进行了分析和探讨     

基于模糊Bow-tie模型的油轮靠港装卸作业溢油风险分析

为了全面分析油轮靠港装卸作业溢油事故风险,在风险定量分析中引入了模糊Bow-tie模型,基于事故树方法分析油轮靠港装卸作业发生溢油事故的原因,采用事件树方法分析溢油事故可能导致的后果,利用模糊集理论与专家评价相结合的方法分析油轮靠港装卸作业溢油的模糊可能值,采用层次分析法确定作业溢油后果因素的权重值,采用矩阵乘法计算溢油后果风险值。分析结果表明:油轮靠港装卸作业过程中一旦发生溢油,发生火灾+污染、爆炸+污染的概率较高。基于以上风险分析提出了油轮靠港装卸作业风险的防控措施,可为油轮靠港装卸作业安全风险管理提供参考。     

基于G1法的高危作业疲劳风险模糊综合评判

疲劳严重威胁作业安全,许多事故都直接或间接由疲劳引发。针对高危作业疲劳风险评价问题,考虑作业疲劳致因,综合运用G1法,提出高危作业疲劳风险的模糊综合评判方法。首先,根据疲劳的表现,系统分析影响高危作业疲劳的因素,以管理因素、岗位因素、作业环境、生理、心理等5个因素为准则,构建作业疲劳风险的评价指标体系。然后,应用G1法,确定指标权重,建立高危作业疲劳风险多级模糊综合评价模型,评判疲劳状况。最后,通过一个案例验证了模型方法的可行性与有效性,为综合评判高危作业疲劳发生可能性提供了一个新视角与方法。     

基于灰色聚类法的地铁运营安全趋势分析

为评估地铁运营安全水平,掌握地铁运营风险变化趋势,采用灰色聚类法对某地铁线路运营一年以来每个月份的安全水平进行了分级评价。选取对地铁日常运营具有重要影响的设备设施故障作为评价指标,评价方法挖掘地铁运营以来的历史数据信息,体现了设备设施故障变化的时间特性,减少了安全评价中的主观性。将地铁运营安全水平分为五个安全等级,选取15%、35%、50%、65%、85%作为各安全等级的累积百分频率特征点,建立白化权函数得到各评价指标的灰类白化值。结合各设备设施的指标权重,得到了地铁线路运营一年来每个月份的安全等级情况。该方法为分析地铁运营安全趋势提供了参考。     

岩质高边坡运营安全风险评估指标体系研究

为建立高速公路岩质高边坡风险评估指标体系,针对指标选取代表性不足、指标分级阈值缺少定量判据、指标获取困难等问题,采用逐坡普查与重点调查、工程地质类比与复核、现场监测与数值计算相结合的方法,提出了岩质高边坡运营安全风险评估指标体系。包括边坡断面几何特征、水的影响、边坡岩体结构、支挡加固设施及边坡破坏模式等5个一级指标与坡高、坡度等15个二级指标,并确定了量化分级标准与取值方法。评估结果表明:指标体系适用性较强,为后续评估运营安全风险奠定了基础。     

气喷旋冲烟气脱硫装置运行关键控制

气喷旋冲湿式石灰石-石膏法烧结烟气脱硫装置(XPB)是宝钢针对烧结烟气特性自主研发的新型脱硫技术,较详细论述该系统稳定、经济运行的关键控制:增压风机风门或叶轮的控制、吸收塔进气箱温度的控制、吸收塔反应池pH值的控制、曝气管浸没深度的控制等。     

Differences in Eye and Hand Movements of Novice and Experienced Press Operators

Presses are very widely used in industrial and commercial companies and are often the source of serious accidents occurring during operation. Most of the accidents are due to inadequate training of novice operators. Continuous recordings of eye and hand movements of five novice operators and five experienced operators in press operation were made. Significant difference between novice and experienced operators was observed in eye fixation time, eye movement patterns, hand dwell time, and eye-hand coordination. Also, differences were observed in spatial distribution of eye fixations during the die-closing portion of a stroke. There were no significant differences between novice and experienced operators in the eye and the hand movement time. The results could be used as basic data to establish a guide determining the method and training period to train novice operators.     

An Observation Method for Analyzing Operators’ Routine Activity in Computerized Control Rooms

An activity analysis method was developed for studying the structure and dynamics of control room operators’ activity during normal operation based on directly observable elements of the operators’ behavior. The method assesses current activity along three dimensions in each 5-min period of the shift. Intensity characterizes arousal level, direction shows whether the activity is directed predominantly at the process control task, at something else, or miscellaneous. Motivation reflects if the activity is driven by intrinsic or extrinsic motivation. A case study is presented, in which 3 morning, 3 afternoon, and 3 night shifts of a Nuclear Power Plant operator crew are involved. The obtained results gave a deeper understanding of the operators’ activity and also revealed an “arousal compensation” tendency.     

A Comparison of VDT Workstation Adjustment Methods by Evaluating and Optimizing VDT Operator’s Seated Posture

Three methods of visual display terminal (VDT) workstation adjustment were compared in this study in order to investigate their effects on the operator’s seated posture. The first two methods were adjustments made both with and without any suggestion on the correct seated posture. The third method was an adjustment after which the workstation settings were initially set according to the results recommended by the IntelAd computer program. Ten male and 5 female participants were asked to readjust a VDT workstation until their most comfortable seated posture was obtained. When comparing the final seated postures to the ones ergonomically recommended, it was found that the workstation adjustment assisted by the computer program yielded the best result, followed by the adjustment without any suggestion on the seated posture, and then the adjustment with a suggestion on the seated posture. Furthermore, factors such as gender and typing skill level were not found to have any significant influence on the results.