Physicochemical aspects of using natural scavengers in removing methylene blue (basic dye) from solution

Effluent from dyeing and finishing processes is an important source of water pollution. The effectiveness of bentonite, kaolinite and sediment from a local deposit in removing methylene blue as a cationic dye from aqueous solutions has been investigated. The adsorption equilibrium (isotherm) has been determined according to Freundlich and Langmuir equations. The optimum amount is 0.5 g for all adsorbents, and the optimum pH ranges are 2-8 for bentonite and 2-6 for kaolinite and sediment. With respect to kinetic modelling, the adsorption of methylene blue on various adsorbents was fitted to a second-order equation. Also, the thermodynamic parameters were determined. The negative free energy values indicate the feasibility of the process and spontaneous nature of adsorption. The positive ΔH° values indicate the endothermic nature of the process. Thus, Egyptian clay minerals and sediments have a great tendency to remove the dye from solutions.     

气象卫星遥感在干旱监测中的应用

本文根据ＮＯＡＡ极轨气象卫星ＡＶＨＲＲ资料计算生成植被指数相对距平图用于旱情监测，并在江苏省１９９４年特大干旱中进行了应用服务     

Analysis of Roadside Inhalable Particulate Matter (PM10) in Major Korean Cities

A data analysis of three major Korean cities was conducted to assess roadside inhalable particulate matter 10 μm or smaller in aerodynamic diameter (PM₁₀), including temporal and meteorological variations, over a recent period of 4 to 6 years. The yearly roadside PM₁₀ concentrations presented a well-defined increasing trend or no trend depending on the roadside monitoring station. Most mean values exceeded or approximated the Korean standard of 70 μg/m³ per year for PM₁₀. A representative roadside diurnal trend was characterized by a distinct morning maximum. In most cases, the Sunday roadside concentrations were similar to or somewhat lower than the weekday concentrations, and the PM₁₀ concentrations presented a well-defined seasonal variation, with the maximum concentration in March. The monthly maximum concentrations observed in March were most likely attributable to Asian dust storms. In two metropolitan cities (Seoul and Busan), the frequency of days with roadside PM₁₀ concentrations exceeding the standard of 150μg/m³ per 24 h was much lower for the roadside monitoring stations than for the residential monitoring station, whereas in the third city (Daegu), this result was reversed. Interestingly, the average maximum concentrations observed for the roadside sites in Seoul and Busan during March were higher than those for the residential sites, suggesting that the roadside concentrations responded more to the dust storms than the residential areas. The relationship between the pollutant concentrations and five important meteorological parameters (solar radiation, wind speed, air temperature, relative humidity, and precipitation) showed that the number and type of meteorological variables included in the equations varied according to the monitoring station or season. Finally, the current results confirmed that attention should be given to the PM₁₀ exposure of residents living near roadways.     

烟花爆竹环保项目分析与研究

烟花爆竹产业的可持续发展集中体现在其产品的安全和环保性能上,从环境保护的角度,探讨烟花爆竹燃放后其残留物对环境、生命健康和安全的危害产生的机理,进而提出对烟花爆竹的环保项目进行研究的必要性和控制的可行性。     

基于均匀分布的滑坡数值模拟参数取值概率研究--以甘肃黑方台黄土滑坡为例

针对数值模拟参数选取主观性强、量化难度大的问题,在高精度无人机地形数据的基础上,通过对11起滑坡案例进行了407组参数反演实验,对结果准确度定量评价后,得到基于Massflow数值软件关键参数λ0的分布范围,进而运用小样本极大似然估计理论,分析区间边界长度对反演精度的影响,最终提出基于均匀分布的参数取值概率模型,并选用案例验证该模型的准确性。结果表明:地形约束会导致反演过程中所需的内聚力减小,反演获得的11组最优λ0的极差和方差分别为0.29、0.01,在置信度为95%下,极大似然法得到区间边界估计长度仅为0.0998,表明参数λ收敛性较好;反演过程中质心滑动距离ψ准确度优于堆积面积重叠率η,在λ0±0.05的范围,参数估计区间内任意值对模拟误差影响较小,评价指标ψ、η与λ0对应案例的相对误差不超过15%;所选案例验证了在置信度为95%下,以反演得到的最优参数区间边界中点构建概率分布函数的可行性和准确性,研究方法可为单体滑坡数值模拟风险评价提供理论支撑。     

Study on explosion risk of aluminum powder under different dispersions

This paper mainly studied the influence of particle size distribution on the explosion risk of aluminum powder under the span of large particle size distribution. The measurement was carried out with the 20 L explosion ball and the Hartmann tube. The statistical analysis was used to analyze the relevance between the parameters of explosion risk and the particle size parameters. Test results showed that with the increase of particle size, the sensitivity parameter increases and the intensity parameter deceleration decreases. The effect of particle size change on MEC and MIE of small particle size aluminum powder is relatively small but greater impact on Pm and (dP/dt)m. The small particle size components greatly increasing the sensitivity of the explosion and accelerating the rate of the explosion reaction; while the large particle size component contributes to the maximum explosion pressure. D_3,2 particle size dust determines the risk of aluminum powder explosion.     

荧光法研究DNA与蒽相互作用机理

利用荧光猝灭光谱和紫外-可见吸收光谱研究了体外DNA对蒽的荧光猝灭机理.结果表明,DNA的紫外-可见光谱没有发生红移现象,通过计算分析不同温度下的荧光猝灭常数和热力学参数,结合两种光谱分析可知DNA对蒽的荧光猝灭属于动态猝灭机理.     

Reproductive parameters and disturbances of embryonic development in the fieldfare (<Emphasis Type="Italic">Turdus pilaris</Emphasis> L.) in the zone of impact from the nuclear fuel industry

The impact of emissions from the Siberian Chemical Plant (Tomsk oblast) on reproduction and embryonic development of the fieldfare was studied. Bird abundance, clutch size, and egg volume in the impact and background (control) zones were similar, but partial brood mortality in the impact zone proved to be significantly higher, and the frequency of embryonic pathologies (including developmental abnormalities) was also several times higher than in the control.     

Concentration of heavy metals in Karanja reservoir, Bidar district, Karnataka, India

In this study, some heavy metals concentrations (Zn, Pb, Fe, Mn, Cu, Ni) and other physico-chemical parameters were studied during October 2001 to September 2003 in Karanja reservoir, Bidar district. Water quality parameters were collected monthly basis whereas heavy metals were analyzed by Atomic Adsorption Spectrometer (AAS). Heavy metals have shown within the permissible limits, except Fe and Ni were recorded higher values in southwest monsoon, where as Mn has showed higher concentration in northeast monsoon in and summer. All other physico-chemical parameters are with in the permissible limit. Water is moderately hard and reservoir is productive.     

Modular Design of Field Lysimeters for Specific Application Needs

In Europe, the use of direct methods using lysimeters for measuring water and solute flow in soils increased in recent years. Large weighable lysimeters are best suitable for obtaining reliable data about seepage water quantity and quality. Field lysimeters – lysimeters built in directly in agriculturally used areas – of high technical standard allow a precise determination of the influence of different cropping systems on groundwater quality. They combine the advantages of true field conditions and laboratory possibilities of varying parameters, handling and maintenance. Due to the specific needs of each application the instrumentation varies. Based on general remarks on the advantages of precise weighing lysimeters four standardized lysimeter configurations are presented. Beside the specific needs of design and setup of lysimeter stations, there is need to define general requirements to enable comparable results based on standardized basic design and to reduce individual mistakes.