高分子重金属絮凝剂CSAX的制备及性能

以玉米淀粉为基体,环氧氯丙烷为交联剂,硝酸铈铵为引发剂,丙烯酰胺为单体,cs2和NaOH为磺化荆.合成了交联淀粉.聚丙烯酰胺-磺原酸酯(CSAX)高分子絮凝剂.用FTIR光谱和元素分析法对合成产物CSAX进行了表征.讨论了环氧氯丙烷的用量、硝酸铈铵的剂量、NaOH和CS2的重量百分比等合成条件对产品性能的影响.结果表明,100g淀粉中环氧氯丙烷的剂量为8mL,硝酸铈铵的用量为6.67×10-4mol·L-1,交联淀粉:NaOH:CS2的质量百分比为2:6:2.4时,获得的絮凝剂CSAX产品具有优良的性能.对同一产品不同储存环境的研究表明.低温避光储存较好.对CSAX絮凝含铜废水形成的污泥做扫描电镜(SEM)和X射线能量色散谱仪(EDS)分析,发现其外部形态和组成成分都发生了很大变化.而CSAX处理实际废水的实验表明,当CSAX的投加剂量为100mol·L-1时. Cu2 、Ni2 的去除率分别达99.1%和82.3%,浊度的去除达96.6%.     

用褐铁矿制备聚硅氯化硫酸铁的研究

通过正交实验研究了用盐酸、硫酸、褐铁矿和硅酸钠制备聚硅氯化硫酸铁（PSFCS）絮凝剂的工艺条件。实验结果表明,浸取时间为2.5-3 h,浸取温度为110℃,硫酸浓度为6 mol/L,盐酸浓度为3 mol/L,质量液固比为4∶1,铁的浸出率可达95.7%-96.3%。溶液中加入少量聚乙烯醇作稳定剂,亚硝酸钠作氧化催化剂。PSFCS的合成条件：Fe/Si摩尔比为2,硅酸活化pH值为2,硅酸活化时间是30-40 min,陈化时间是2-2.5 h。与聚合硫酸铁（PFS）和聚合氯化铝（PAC）比较了处理印染废水的效果,表明PSFCS具有良好的絮凝性能,COD和浊度的去除率分别可达81.4%和96.1%。     

一种微生物絮凝剂絮凝特性的研究

实验表明,在一定条件下,黑曲霉所产微生物絮凝剂对高岭土悬浊液的絮凝率能达到96％以上,该微生物絮凝荆在pH值很低的情况下亦能保持较高的絮凝活性,添加助凝剂CaCl2能大幅提高絮凝率。该絮凝剂的絮凝效果不易受温度的影响,其最佳投加量为2mL／100mL。     

氢氧化镁-壳聚糖复合絮凝剂对印染废水的脱色研究

使印染废水脱色是废水处理的重要问题,利用无枳／有机复合絮凝剂可取得优良的脱色效果。采用氢氧化镁一壳聚糖复合絮凝剂对印染废水进行脱色处理,研究了pH值、壳聚糖投加量、复合絮凝剂加入量等对脱色效果的影响。结果表明氢氧化镁一壳聚糖复合絮凝剂比单独使用氢氧化镁絮凝剂脱色效果好。壳聚糖是一种天然高分子化合物,是甲壳素的脱乙基产物。来源丰富,且具有无毒副作用、易降解等优点。利用壳聚糖作为复配剂制备的复合絮凝减少了镁盐的使用量,有效降低了废水处理成本,避免引起二次污染。     

Co-metabolic and biochar-promoted biodegradation of mixed PAHs by highly efficient microbial consortium QY1

Polycyclic aromatic hydrocarbons (PAHs), typical representatives of the persistent organic pollutants (POPs), have become ubiquitous in the environment. In this study, a novel microbial consortium QY1 that performed outstanding PAHs-degrading capacity has been enriched. The degradation characteristics of single and mixed PAHs treated with QY1 were studied, and the effect of biochar on biodegradation of mixed PAHs and the potential of biochar in PAHs-heavy metal combined pollution bioremediation were also investigated. Results showed that, in single substrate system, QY1 degraded 94.5% of 500 mg/L phenanthrene (PHE) and 17.8% of 10 mg/L pyrene (PYR) after 7 days, while in PHE-PYR mixture system, the biodegradation efficiencies of PHE (500 mg/L) and PYR (10 mg/L) reached 94.0% and 96.2%, respectively, since PHE served as co-metabolic substrate to have significantly improved PYR biodegradation. Notably, with the cooperation of biochar, the biodegradations of PHE and PYR were greatly accelerated. Further, biochar could reduce the adverse impact of heavy metals (Cd²⁺, Cu²⁺, Cr₂O₇^2?) on PYR biodegradation remarkably. The sequencing analysis revealed that Methylobacterium, Burkholderia and Stenotrophomonas were the dominant genera of QY1 in almost all treatments, indicating that these genera might play key roles in PAHs biodegradation. Overall, this study provided new insights into the efficient bioremediation of PAHs-contaminated site.     

Synthesis and evaluation of cationic flocculant P(DAC-PAPTAC-AM) for flocculation of coal chemical wastewater

In this study, a high-efficiency cationic flocculant, P(DAC-MAPTAC-AM), was successfully prepared using UV-induced polymerization technology. The monomer Acrylamide (AM): Acryloxyethyl Trimethyl ammonium chloride (DAC): methacrylamido propyl trimethyl ammonium chloride (MAPTAC) ratio, monomer concentration, photoinitiator concentration, urea content, and cationic monomer DAC:MAPTAC ratio, light time, and power of high-pressure mercury lamp were studied. The characteristic groups, characteristic diffraction peaks, and characteristic proton peaks of P(DAC-MAPTAC-AM) were confirmed by fourier transform infrared spectroscopy (FTIR), X-Ray diffraction (XRD), ¹H nuclear magnetic resonance spectrometer (¹H NMR), and scanning electron microscopy (SEM). The effects of dosage, pH value, and velocity gradient (G) value on the removal efficiencies of turbidity, COD, ammonia nitrogen, and total phenol by poly aluminum ferric chloride (PAFC), P(DAC-MAPTAC-AM), and PAFC/P(DAC-MAPTAC-AM) in the flocculation treatment of coal chemical wastewater were investigated. Results showed that the optimal conditions for the flocculation of coal chemical wastewater using P(DAC-MAPTAC-AM) alone are as follows: dosage of 8–12 mg/L, G value of 100–250 s ^? 1, and pH value of 4–8. The optimal dosage of PAFC is 90–150 mg/L with a pH of 2–12. The optimal dosage for PAFC/P(DAC-MAPTAC-AM) is as follows: PAFC dosage of 90–150 mg/L, P(DAC-MAPTAC-AM) dosage of 8–12 mg/L, and pH range of 2–6. When P(DAC-MAPTAC-AM) was used alone, the optimal removal efficiencies of turbidity, COD, ammonia nitrogen, and total phenol were 81.0%, 35.0%, 75.0%, and 80.3%, respectively. PAFC has good tolerance to wastewater pH and good pH buffering. Thus, the flocculation treatment of coal chemical wastewater using the PAFC/P(DAC-MAPTAC-AM) compound also exhibits excellent resistance and buffering capacity.     

Isolation and characterization of a strain with high microbial attachment in aerobic granular sludge

Aerobic granule is a special microbial aggregate associated with biofilm structure. The formation of aerobic granular sludge is primarily depending on its bacterial community and relevant microbiological properties. In this experiment, a strain with high microbial attachment was isolated from aerobic granular sludge, and the detailed characteristics were examined. Its high attachment ability could reach 2.34 (OD_600nm), while other low attachment values were only around 0.06-0.32, which indicated a big variation among the different bacteria. The strain exhibited a very special morphology with many fibric fingers under SEM observation. A distinctive behaviour was to form a spherical particle by themselves, which would be very beneficial for the formation and development of granular sludge. The EPS measurement showed that its PN content was higher than low attachment bacteria, and 3D-EEM confirmed that there were some different components. Based on the 16S rRNA analysis, it was identified to mostly belong to Stenotrophomonas. Its augmentation to particle sludge cultivation demonstrated that the strain could significantly promote the formation of aerobic granule. Conclusively, it was strongly suggested that it might be used as a good and potential model strain or chassis organism for the aerobic granular sludge formation and development.     

Speciation characterization and coagulation of poly-silica-ferric-chloride：The role of hydrolyzed Fe（Ⅲ） and silica interaction

The highly e cient inorganic polymer flocculants (IPFs) of the ferric-silica system is a new and promising coagulant. Interactions between ferric species and silica play a large part in the coagulation of suspensions. These e ects are quite distinct from those associated with polymeric or colloid silica. However, although these species are key to coagulation e ciency, they have not been comprehensively discussed. A new type of coagulant, poly-silica-ferric-chloride (PFSC), was synthesized by co-polymerization and characterized by time complexation spectroscopy and photon correlation spectroscopy. Compared with traditional ferric salt, the results indicated that PFSC had a higher molecular weight, lesser positive charge, lower Feb and higher Fec. The higher the Si/Fe ratio, the higher the silica and lower the silicac found. The PFSC with appropriate polysilica acid not only obtained better coagulation/flocculation e ciency in turbidity removal, enhanced the flocculation index (FI) and provided less residual ferric, it also lowered water treatment costs compared to traditional ferric salt. Results showed that PFSC could remove colloid particles in water by charge neutralization and sweeping, adsorption bridging mechanism.     

Integration of microbial reductive dehalogenation with persulfate activation and oxidation (Bio-RD-PAO) for complete attenuation of organohalides

•Bio-RD-PAO can effectively and extensively remove organohalides. •Bio-RD alone effectively dehalogenate the highly-halogenated organohalides. •PAO alone is efficient in degrading the lowly-halogenated organohalides. •The impacts of PAO on organohalide-respiring microbial communities remain elusive. •Bio-RD-PAO provides a promising solution for remediation of organohalide pollution. Due to the toxicity of bioaccumulative organohalides to human beings and ecosystems, a variety of biotic and abiotic remediation methods have been developed to remove organohalides from contaminated environments. Bioremediation employing organohalide-respiring bacteria (OHRB)-mediated microbial reductive dehalogenation (Bio-RD) represents a cost-effective and environmentally friendly approach to attenuate highly-halogenated organohalides, specifically organohalides in soil, sediment and other anoxic environments. Nonetheless, many factors severely restrict the implications of OHRB-based bioremediation, including incomplete dehalogenation, low abundance of OHRB and consequent low dechlorination activity. Recently, the development of in situ chemical oxidation (ISCO) based on sulfate radicals (SO₄^·−) via the persulfate activation and oxidation (PAO) process has attracted tremendous research interest for the remediation of lowly-halogenated organohalides due to its following advantages, e.g., complete attenuation, high reactivity and no selectivity to organohalides. Therefore, integration of OHRB-mediated Bio-RD and subsequent PAO (Bio-RD-PAO) may provide a promising solution to the remediation of organohalides. In this review, we first provide an overview of current progress in Bio-RD and PAO and compare their limitations and advantages. We then critically discuss the integration of Bio-RD and PAO (Bio-RD-PAO) for complete attenuation of organohalides and its prospects for future remediation applications. Overall, Bio-RD-PAO opens up opportunities for complete attenuation and consequent effective in situ remediation of persistent organohalide pollution.     

Acid Orange 7 degradation using methane as the sole carbon source and electron donor

• AO7 degradation was coupled with anaerobic methane oxidation. • Higher concentration of AO7 inhibited the degradation. • The maximum removal rate of AO7 reached 280 mg/(L·d) in HfMBR. • ANME-2d dominated the microbial community in both batch reactor and HfMBR. • ANME-2d alone or synergistic with the partner bacteria played a significant role. Azo dyes are widely applied in the textile industry but are not entirely consumed during the dyeing process and can thus be discharged to the environment in wastewater. However, azo dyes can be degraded using various electron donors, and in this paper, Acid Orange 7 (AO7) degradation performance is investigated using methane (CH₄) as the sole electron donor. Methane has multiple sources and is readily available and inexpensive. Experiments using ¹³C-labeled isotopes showed that AO7 degradation was coupled with anaerobic oxidation of methane (AOM) and, subsequently, affected by the initial concentrations of AO7. Higher concentrations of AO7 could inhibit the activity of microorganisms, which was confirmed by the long-term performance of AO7 degradation, with maximum removal rates of 8.94 mg/(L·d) in a batch reactor and 280 mg/(L·d) in a hollow fiber membrane bioreactor (HfMBR). High-throughput sequencing using 16S rRNA genes showed that Candidatus Methanoperedens, affiliated to ANME-2d, dominated the microbial community in the batch reactor and HfMBR. Additionally, the relative abundance of Proteobacteria bacteria (Phenylobacterium, Pseudomonas, and Geothermobacter) improved after AO7 degradation. This outcome suggested that ANME-2d alone, or acting synergistically with partner bacteria, played a key role in the process of AO7 degradation coupled with AOM.