2014—2018年冬季长三角强霾事件及天气形势影响分析

利用2014-2018年环保部空气污染监测资料以及同期NCEP/NCAR再分析资料,统计分析了冬季长三角地区强霾污染过程中大尺度环流背景场及气象要素对强霾污染的影响.结果表明：2014-2018年冬季长三角地区共发生5次强霾污染过程,每年冬季的12月和1月是强霾污染事件发生的高频时期.当大气中相对湿度维持在较高的水平并且维持较小的风速时,更有利于污染物的累积从而导致强霾污染事件的发生.雾霾天气的发生发展与大气环流有着密切联系,在强霾污染过程发生初期,污染物大多伴随冷空气由北向南输送至长三角地区,对流层中层500 hPa的大尺度环流形势多以纬向环流为主.严重污染发生时,长三角地区受平直西风气流影响,对流层低层850 hPa等压线较为稀疏,长三角地区受均压场或高压控制频繁,稳定的大气层结使污染物更易在近地层累积,随后大风伴随冷锋过境将污染物快速清洁导致PM_2.5浓度迅速降低.     

考虑不同场景的砖木结构古建筑火灾特征研究

为探明砖木结构古建筑火场下的特征,定量分析不同火灾场景下,建筑内部温度、烟气浓度等参数的变化。选取中国北方典型的砖木结构体系的四合院韩城党家村贾祖祠为研究对象,采用PyroSim建模分析,研究不同火灾场景下不同时间点的温度、CO浓度、能见度等变化。研究结果表明:贾祖祠主厢房较封闭,火灾中火源周围温度峰值可达750 ℃,CO质量浓度达到0.003 kg/m3,能见度几乎为0 m,风速最高为10 m/s且极不稳定;四合院中主厢房空间布局高,火灾中这些参数的影响会导致严重的轰燃现象发生,故此处发生火灾更易产生严重危害。对不同场景的砖木结构古建筑重要火灾因素发展规律的研究,能为古建筑的性能化防火提供科学参考依据。     

基于支持向量机的管制疲劳检测模型研究

管制疲劳是影响民航安全的重大隐患,准确检测疲劳状态是进行疲劳预警、降低疲劳风险的关键。提出应用支持向量机模型融合多生理参数和眼动指标进行管制疲劳检测,通过MP150多导生理记录仪与眼动仪,采集模拟管制试验中正常与剥夺睡眠状态下被试的试验数据,同时记录其Karolinska疲劳等级和操作绩效。结果表明,RR间期、LF/HF、快慢波比值、PERCLOS和扫视速度均与管制疲劳呈较强相关,利用支持向量机融合五项指标构建管制疲劳检测模型,对于五级疲劳度的识别准确率为78. 1%,判断正常组与剥夺睡眠组的准确率为94. 2%。     

脑力疲劳与非疲劳状态眼动指标的判别

为研究利用眼动指标(注视点个数FC、平均注视时间AFD、平均眼跳幅度ASA、最大瞳孔面积Pupil Max及反应时RD)对脑力疲劳状态进行判定,通过眼动追踪技术,测试了不同脑力疲劳程度的眼动指标值并进行分析。结果表明:1)通过FC、AFD、ASA和Pupil Max四个眼动指标可以判定被试者所处的疲劳状态; 2)当测试者注视点个数FC处于(11,13)区间,平均注视时间AFD处于(328,409)区间,平均眼跳幅度ASA处于(5,7)区间,最大瞳孔面积Pupil Max处于(992,1 124)区间时为非疲劳状态;当FC处于(7,10)区间,AFD处于(263,319)区间,ASA处于(2,4)区间,最大瞳孔面积Pupil Max处于(584,935)时可以认定被试者为疲劳状态。     

含复杂管路的某机构模态参数识别研究

目的获取复杂结构产品的模态参数及动态性能。方法采用基于冲击激励的试件自由模态分析试验,综合分析频响函数曲线幅值,确定局部结构模态频率点,利用半功率带宽法和专用分析软件分别计算模态阻尼比和模态振型。结果识别出影响某机构动态性能关键部件的模态参数。结论发现机构外壳模态频率远离冷却装置频率点,冷却管一阶横向模态由自身结构特性产生,二阶及纵向模态由减压阀模态引起。气体导管的动态特性主要受冷却装置模态的影响。     

ESTIMATION OF THE HIEC1 LOSS PARAMETERS FOR ROUTING THE PROBABLE MAXIMUM FLOOD1

ABSTRACT: Twenty storm events were used to select design values of the HEC1 loss parameters STRTL and CNSTL in order to route the probable maximum flood, PMF, through the Englewood watershed, Ohio. The parameter STRTL represents the initial volume of water lost due to interception and incomplete saturation of the soil prior to the storm. The parameter CNSTL represents a continuous loss rate and depends only on the watershed. When optimized from each storm event, STRTL varied between 0.0 and 3.4 inches with an average of 1.0 inch; CNSTL varied between 0.02 and 0.26 inch/hour, and it followed a normal probability distribution with a mean of about 0.1 inch/hour. The absence of correlation between optimum CNSTL values and each of total rainfall, total loss, and runoff duration supported the selection of the mean CNSTL as a design value. PMF routing through the Englewood watershed revealed that the PMF at the outlet is not sensitive to STRTL, but highly affected by CNSTL variations. The insensitivity to STRTL was due to the presence of a dam at the outlet of the watershed that caused the buildup of water in the watershed, thereby masking the storage effect of STRTL. The peak PMF increased by about 27 percent when the design CNSTL was decreased to 0.05 inch! hour, and decreased by about 18 percent when the design CNSTL was increased to 0.15 inch/hour.     

Beyond the material grave: Life Cycle Impact Assessment of leaching from secondary materials in road and earth constructions

In industrialized countries, large amounts of mineral wastes are produced. They are re-used in various ways, particularly in road and earth constructions, substituting primary resources such as gravel. However, they may also contain pollutants, such as heavy metals, which may be leached to the groundwater. The toxic impacts of these emissions are so far often neglected within Life Cycle Assessments (LCA) of products or waste treatment services and thus, potentially large environmental impacts are currently missed. This study aims at closing this gap by assessing the ecotoxic impacts of heavy metal leaching from industrial mineral wastes in road and earth constructions. The flows of metals such as Sb, As, Pb, Cd, Cr, Cu, Mo, Ni, V and Zn originating from three typical constructions to the environment are quantified, their fate in the environment is assessed and potential ecotoxic effects evaluated. For our reference country, Germany, the industrial wastes that are applied as Granular Secondary Construction Material (GSCM) carry more than 45,000 t of diverse heavy metals per year. Depending on the material quality and construction type applied, up to 150 t of heavy metals may leach to the environment within the first 100 years after construction. Heavy metal retardation in subsoil can potentially reduce the fate to groundwater by up to 100%. One major challenge of integrating leaching from constructions into macro-scale LCA frameworks is the high variability in micro-scale technical and geographical factors, such as material qualities, construction types and soil types. In our work, we consider a broad range of parameter values in the modeling of leaching and fate. This allows distinguishing between the impacts of various road constructions, as well as sites with different soil properties. The findings of this study promote the quantitative consideration of environmental impacts of long-term leaching in Life Cycle Assessment, complementing site-specific risk assessment, for the design of waste management strategies, particularly in the construction sector.     

Old endemics and new invaders: alternative strategies of passerines for living in the Australian environment

Life history parameters of ”old endemics” and ”new invaders” among the Australian passerines were compared, controlling for phylogeny by using current, phylogenetic research methods. Old endemics were found to have significantly smaller clutches and demonstrated significantly more cooperative breeding than the new invaders, whose fledging periods are significantly longer than those of the old endemics. We argue that breeding under conditions of a small annual food increment during the breeding season, as is probably the situtation in Australia, is possible only when clutch size is small, or while breeding cooperatively, or by extending the fledging period. Our data show that the old endemics use the first two options, while the new invaders employ the third. Received: 10 February 1999 / Received in revised form: 10 November 1999 / Accepted: 20 November 1999     

Effects of dietary copper exposure on accumulation,growth, and hematological parameters in Cyprinus carpio

The influence of dietary copper (Cu) exposure on accumulation, growth, and hematological parameters was investigated in Cyprinus carpio after sub-chronic ingestion of 0, 250, 500, 750 or 1000?mg?kg^?1 for 60 days. The profile of Cu accumulation among tissues in C. carpio was dependent on the exposure period and Cu concentration. Liver of C. carpio was the predominant storage tissue and the order of Cu accumulation in tissues was liver?>?intestine?> gill?>?kidney?>?muscle. Cu concentration at >125?mg?kg^?1 reduced growth rate, and was inversely related to growth. The RNA?:?DNA ratios were not affected by exposure and there was no correlation between growth rate and RNA?:?DNA ratio in liver and muscle. There were no significant effects of exposure on blood parameters except for magnesium. Cu exposure time and dose increased the serum glutamic-oxaloacetic transaminase (SGOT) and serum glutamic-pyruvic transaminase (SGPT) activity levels.     

朱集矿13-1煤瓦斯参数规律研究

为了采取合理的瓦斯抽采技术,实现矿井安全高效开采,对朱集矿13-1煤瓦斯基本参数进行了现场和实验室测定,得出了瓦斯含量、瓦斯压力、放散初速度,透气性系数、坚固性系数等参数,并对测定结果进行了理论分析,得出了这些参数的基本规律.结果表明:随着开采深度的增加,在一定深度范围内,其瓦斯压力、瓦斯含量呈线性增长,瓦斯压力与瓦斯含量都比较大；煤层钻孔瓦斯衰减系数较大,该煤层的透气性系数较小,D、K值小于其临界值,可判断出该煤层为难抽煤层且有突出危险性.