Sorption behavior of bensulfuron-methyl on andisols and ultisols volcanic ash-derived soils: Contribution of humic fractions and mineral-organic complexes

Bensulfuron-methyl sorption was studied in Andisol and Ultisol soils in view of their characteristic physical and chemical properties, presenting acidic pH and variable charge. Humic and fulvic acids (HA and FA) and humin (HUM) contributions were established. Sorption was studied by using two synthetic sorbents, an aluminum-silicate with iron oxide coverage and the same sorbent coated with humic acid. Freundlich model described Bensulfuron-methyl behavior in all sorbents (R² 0.969-0.998). K_f for soils (8.3-20.7 μg^1−1/n mL^1/n g⁻¹) were higher than those reported in the literature. Organic matter, halloysite or kaolinite, and specific surface area contributed to the global process. The highest K_f for HA, FA and HUM were 539.5, 82.9, and 98.7 μg^1−1/n mL^1/n g⁻¹. Model sorbents described the participation of variable charge materials with high adsorption capacity. The constant capacitance model was used to assess effects of Bensulfuron-methyl adsorption on the distribution of SOH, SOH₂⁺ and SO⁻ sites of sorbents.     

Challenges when performing economic optimization of waste treatment: A review

Strategic and operational decisions in waste management, in particular with respect to investments in new treatment facilities, are needed due to a number of factors, including continuously increasing amounts of waste, political demands for efficient utilization of waste resources, and the decommissioning of existing waste treatment facilities. Optimization models can assist in ensuring that these investment strategies are economically feasible.Various economic optimization models for waste treatment have been developed which focus on different parameters. Models focusing on transport are one example, but models focusing on energy production have also been developed, as well as models which take into account a plant’s economies of scale, environmental impact, material recovery and social costs. Finally, models combining different criteria for the selection of waste treatment methods in multi-criteria analysis have been developed.A thorough updated review of the existing models is presented, and the main challenges and crucial parameters that need to be taken into account when assessing the economic performance of waste treatment alternatives are identified. The review article will assist both policy-makers and model-developers involved in assessing the economic performance of waste treatment alternatives.     

金属氧化物颗粒/水界面上NOM吸附机制的研究

以腐殖酸作为天然有机物(NOM)的代表,研究了腐殖酸分子在金属氧化物(赤铁矿)颗粒/水界面上的吸附特征,分析了pH值和离子强度对界面吸附配位反应的影响,及它们对赤铁矿颗粒表面吸附密度和团聚体粒径的影响.结果表明,吸附密度随pH值的升高而减少,随离子强度的升高而增大;颗粒团聚体粒径随pH值的升高先增大后减小,随离子强度的升高而增大.pH=4时吸附密度最大,为6.22 mg/m2,但此时团聚体粒径最小;pH=5时吸附密度较小,但团聚体粒径较大;pH=8为配位反应等电点,吸附密度和团聚体粒径均较小;pH=10吸附密度最小,为0.50 mg/m2,团聚体粒径也较小.应用SS/SF混合模型初步分析了赤铁矿颗粒/水界面上腐殖酸分子的吸附构型.当pH值较低时,构型多为链状和环状;当pH值较高时,构型多为扫尾状.离子强度越高,链状和扫尾状构型越多;离子强度越低,环状构型越多.     

Numerical simulation of evaporation of volatile liquids

The paper presents the results of the validation of the developed pool evaporation model using literature and our own experimental data. The proposed model was used to examine the effect of wind velocity and pool sizes on the evaporation rate of volatile liquid (hexane). Contrary to the semi-empirical evaporation model widely used in hazard assessment, stronger dependence of evaporation rate on pool size at low wind speeds is obtained.     

Anaerobic digestion modeling of the main components of organic fraction of municipal solid waste

The organic fraction of municipal solid waste (OFMSW) is composed of several heterogeneous organic and inorganic wastes. The diversity of composition, the high volatile solid content and the biodegradable material that this waste offers make it quite an interesting option for anaerobic digestion (AD). Depending on the substrate composition, the biological degradation and kinetics of the AD could vary. Biochemical methane potential (BMP) tests are used as a tool to evaluate the methane production of several fractions of OFMSW, in order to study the influence of each fraction in the final mixture. The kinetic parameters of methane curves and the prediction of final productions are studied by different approaches to model equations using linear, exponential, logistic and Gaussian models. The analyses of the fractions indicate that organic substrates such as meat/fish which are in a small proportion in the final mixture, obtain major productivities (291 ± 3 mlCH₄/gVS), however others such as paper (217 ± 5 mlCH₄/gVS) could have their productivity enhanced due to their high VS present in the final mixture. Both the Gomperzt and the first order model fit reasonably with all the fractions, although substrates with lag phase adjust only to the Gompertz model explaining 99% of the experimental results.     

The role of component arrangement in complex safety instrumented systems—A case study

The arrangement of components plays a key role in the performance of complex Safety Instrumented Systems (SIS), in which a SIS logic solver is interlocked with other logic solvers, to share a final element, for instance. The position of the components and the way they are utilized affects the reliability characteristics, such as the Probability of Failure on Demand (PFD), Spurious Trip Rate (STR), architectural sensitivity and model uncertainty. This case study uses quantitative and qualitative approaches to elaborate on various aspects of component arrangement in complex SIS. Numerous simplified models are analyzed; new classification is introduced for SIS components based on their response to demand; a set of guidelines are developed for SIS architecture design, with a focus on component arrangement; and the use of these guidelines is demonstrated in a real-life example, where an existing turbine SIS is modified to incorporate a new over-speed protection system. The simplified models and the turbine upgrade project are also used to explain the issue of unknowns and uncertainties in reliability analysis and how these issues can be addressed in SIS architecture by optimizing component arrangement.     

2000～2010年贵州省植被净初级生产力时空变化研究

为了探明贵州省植被净初级生产力(NPP)在2000~2010年的变化状况,以2000~2010年植被NPP数据为基础,运用ArcG IS和SPSS进行综合分析。结果表明:近11年间,草地、城镇用地、阔叶林、针叶林和湿地等面积呈增加趋势,而灌木林和农田则持续减少,其中农田面积变化尤为明显;2000~2010年贵州省植被NPP变化较大,NPP变化范围为778~889 g/(m2·a),平均值为828.1 g/(m2·a),NPP缓慢上升趋势;全省NPP分布有明显地域性差异,铜仁和六盘水为显著增加(P0.05),其余地州市增加缓慢(P0.05)。黔东南年均NPP最高((927±111)g/(m 2·a)),毕节最低((725±107)g/(m2·a))。NPP变化趋势为东南向西北方向递减,而往西北方向NPP波动程度明显;阔叶林和灌木林缓慢下降,而针叶林和针阔混交林则上升。NPP表现为针阔混交林阔叶林针叶林灌木林。     

深圳市光明新区城区径流污染负荷估算研究

针对深圳市光明新区城区径流,采用SCS径流曲线模型对其SS、COD、TN及TP等污染负荷进行了估算。结果表明,光明新区城区径流污染负荷中,SS、COD、TN、TP的污染负荷量分别为18527.8、11023.81、197.29和91.58 t,其中COD的排放负荷已超出其收纳水体茅洲河环境容量6.0倍,COD和SS的年输出系数值也明显高出同类城市,SS和COD为该地区降雨径流中的主要污染物。     

福建省水土流失地理国情监测研究与应用——以22个重点县为例

为掌握福建省境内个22重点县水土流失地理国情现状,利用高分辨率资源三号遥感卫星影像数据进行监测分析。以土壤侵蚀分类分级标准SL190-2007为依据,通过土地利用、植被覆盖度以及坡度等水土流失影响因子的信息提取,基于GIS软件平台上,建立符合福建省水土流失地理国情的遥感监测信息提取模型。经GPS进行野外调查、验证和修改,最终完成区域水土流失图斑的提取和建库工作,为科学规划与治理及其成效分析等提供科学依据。     

集中供热项目环境效益分析——以某市集中供热项目为例

介绍了某市新区供热现状,并对预测模型AERMOD的运行参数及数据来源进行了简要说明,根据区内供热现状及采取集中供热方式后新区冬季采暖集中供热锅炉烟气污染物排放源强的变化情况,采用AERMOD模型分别进行了预测。在此基础上,通过对比分析,得出了大型集中供热工程具有明显环境效益的结论。