Leaching Induced Changes in Substrate and Solution Chemistry of Mine Soil Microcosms

Leaching of soluble salts formed as the result of pyrite oxidation and primary mineral weathering is a major process in mine soil development. A microcosm experiment was designed to study leaching rates from mine soil columns under controlled laboratory conditions. Objectives of this experiment were to investigate the effect of leaching and the effect of fly ash amelioration on mid- to long-term chemical soil properties, and to test whether the results are qualitatively comparable to long-term field studies along a site chronosequence. The leaching experiment was conducted over a period of 850 days representing a kind of time-lapse picture due to high water fluxes. Leaching resulted in more favourable mid- to long-term properties of mine site topsoils, especially a reduced risk for acidity and salt stress. Ash amelioration decreases leaching rates by increasing pH and Al and Fe precipitation. It could be shown that the results of the column leaching studies are qualitatively in good agreement with field observations at least for long-term considerations. By enhancing the leaching process mid- to long-term chemical soil properties can be estimated.     

Development and validation of HPLC methods for analysis of chlorantraniliprole insecticide in technical and commercial formulations

Effective, selective, precise and accurate liquid chromatographic analytical methods for the analysis of a novel chlorantraniliprole insecticide in technical and formulation (coragen, 20% SC) have been optimized and validated. Eight methods were designed based on different mobile phases, temperature and two HPLC columns. The mobile phase consists of two mixtures (acetonitrile:water, 70:30 and methanol:water, 70:30) with 25 or 40ºC. HPLC analysis of chlorantraniliprole was carried out at a wavelength of 260 nm, with a flow rate of 0.8 mL/min. The calibration curves showed a good linear relationship (R² ? 0.99) in the injected quantities ranged from 0.0125 to 1.00 μg. Limit of detection (LOD) was found to be 3.94 to 14.56 ng and from 5.95 to 12.93 ng using the analytical methods I to IV by MicroPack CN-10 and V-VIII by ZORBAX Eclips Plus C18 columns, respectively, based on SDslope values. ZORBAX Eclips Plus C18 column with method VI was the best one (R² = 1.00 and RSD = 0.30), short retention time (4.936 min), high theoretical plates per column (65457.15) compared to others and LOD = 6.49 ng. The accuracy of the best method was demonstrated by recovery rates of 83.04% to 98.50% for grape samples supplemented with 5, 10 and 50 mg chlorantraniliprole/kg.     

±660kV交流滤波器高压电容塔调平

基于ABAQUS软件建立了标准升温条件下局部填充混凝土(Partially Encaed Concrete,简称PEC)柱抗火性能分析的有限元模型,计算了火灾下PEC柱的变形曲线及耐火极限,计算结果得到了已有试验数据的验证。利用上述模型分析了截面几何参数、材料物理参数、荷载比及偏心率等因素对耐火极限的影响。在参数分析的基础上,建立了标准升温条件下PEC耐火极限简化计算方法。结果表明:无耐火保护PEC柱的耐火极限一般达不到现有抗火标准的要求;荷栽比、长细比和截面周长是影响PEC柱耐火极限的主要因素;该耐火极限简化计算方法可供工程设计参考。     

Adsorption-desorption and leaching of pyraclostrobin in Indian soils

Pyraclostrobin is a new broad-spectrum foliar applied and seed protectant fungicide of the strobilurin group. In this paper, adsorption-desorption of pyraclostrobin has been investigated in three different soils viz. Inceptisol (sandy loam, Delhi), Vertisol (sandy clay, Hyderabad) and Ultisol (sandy clay loam, Thrissur). Effect of organic matter and clay content on sorption was also studied in Inceptisol of Delhi. Leaching potential of pyraclostrobin as influenced by rainfall was studied in intact soil columns to confirm the results of adsorption-desorption studies. The adsorption studies were carried out at initial concentrations of 0.05, 0.1, 0.5, 1 and 1.5 μg mL^?1. The distribution coefficient (K_d) values in three test soils ranged from 4.91 to 18.26 indicating moderate to high adsorption. Among the three test soils, adsorption was the highest in Ultisol (K_d 18.26), followed by Vertisol (K_d 9.87) and Inceptisol (K_d 4.91). K_F value was also highest for Ultisol soil (66.21), followed by Vertisol (40.88) and Inceptisol (8.59). S-type adsorption isotherms were observed in all the three test soils. K_d values in organic carbon-removed soil and clay-removed soil were 3.57 and 2.83 respectively, indicating lower adsorption than normal Inceptisol. Desorption studies were carried out at initial concentrations of 0.5, 1 and 1.5 μg mL^?1. Desorption was the greatest in Inceptisol, followed by Vertisol and Ultisol. Amounts of pyraclostrobin desorbed in three desorption cycles for different concentrations were 23.1–25.3%, 9.4–20.7% and 8.1–13.6% in Inceptisol, Vertisol and Ultisol respectively. Desorption was higher in clay fraction-removed and organic carbonremoved soils than normal Inceptisol. Desorption was slower than adsorption in all the test soils, indicating hysteresis effect (with hysteresis coefficient values varying from 0.05 to 0.20). Low values of hysteresis coefficient suggest high hysteresis effect indicating easy and strong adsorption, and slow desorption, of pyraclostrobin in soils. Higher hysteresis coefficient values in organic carbon removed soil (0.25–0.30) and clay fraction removed soil (0.28–0.36) as compared to normal Inceptisol soil suggest relatively weak adsorption and easy desorption of pyraclostrobin. Results of regression analysis suggest that the organic matter and pH of the soil play a major role in adsorption of pyraclostrobin. Leaching studies were carried out in intact soil columns in Inceptisol. The columns were leached with different amounts of water simulating different amounts of rainfall. The results suggest that most of the pyraclostrobin residues will remain present in the top soil layers even under high rainfall conditions and chances of pyraclostrobin moving to lower soil depth are almost negligible.     

Application of nanobalance technique and principal component analysis for detection of the soil fumigant Telone residues in the air

Quartz crystal nanobalance (QCN) technique is considered as a powerful mass sensitive sensor for monitoring of materials in the sub-nanogram level. In the current study, a method based on QCN technique developed to determine Telone in air. Various coating materials including methyl phenyl silicon, 75% phenyl (OV25) and molecularly imprinted polymer (MIP) were employed. The frequency shift of OV25-modified quartz crystal was found to be linear against organohalogen compounds [Telone (soil fumigant), Koril (Herbicide), Endosulfan (organochlorine insecticide) and Chloroform (solvent)] concentrations in the range of 2.4 to 48 mg L^?1 for Telone vapor and 4.8–24 mg L^?1 for three other vapors. The correlation coefficients for Telone, Koril, Endosulfan and Chloroform were 0.992, 0.996, 0.989 and 0.991, respectively. The principal component analysis was also utilized to process the frequency response data of the organic vapors. Using principal component analysis, it was found that more than 93.85% of the data variance could still be explained by use of two principal components (PC1 and PC2). Subsequently, the successful discrimination of Telone and other compounds was quite possible through the principal component analysis of the transient responses of the OV25-modified electrode. In the second method, a molecularly imprinted polymer-coated sensor for Telone was developed. Molecularly imprinted polymer coated quartz crystal (MIP-QCN) showed a selective response to Telone and gave a linear relationship between frequency shift and amount of Telone from 1 to 48 mg L^?1. In this investigation, the proficiency of MIP-QCN and OV25-modified QCN sensors were compared.     

Synthesis of core-shell magnetic molecular imprinted polymer by the surface RAFT polymerization for the fast and selective removal of endocrine disrupting chemicals from aqueous solutions

In this study, we present a general protocol for the making of surface-imprinted core-shell magnetic beads via reversible addition-fragmentation chain transfer (RAFT) polymerization using RAFT agent functionalized iron oxide nanoparticles as the chain transfer agent. The resulting composites were characterized by X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) analysis, thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The surface-imprinted magnetic beads were demonstrated with a homogeneous polymer films (thickness of about 22 nm), spherical shape, and exhibited magnetic property (Ms = 0.41 mA m² g⁻¹) and thermal stability. Rebinding experiments were carried out to determine the specific binding capacity and selective recognition. The as-synthesized surface-imprinted core-shell magnetic beads showed outstanding affinity and selectivity towards bisphenol A over structurally related compounds, and easily reach the magnetic separation under an external magnetic field. In addition, the resulting composites reusability without obviously deterioration in performance was demonstrated at least five repeated cycles.     

整装反应器无反应条件下的传热

研究整装反应器在反应点火之前的传热行为以及反应器参数对基体热响应的影响。建立了起燃阶段反应器的传热模型,通过数值计算,分析和讨论了固相轴向热传导性能及各种设计参数对基体热响应的影响。比较了基体采用金属体或陶瓷体时热响应的不同。结果表明,当无量纲导热系数∧＜1时,固相轴向导热性能对基体热响应无明显影响,金属体具有好的热响应性能,参数分析有助于反应器的设计和建模。     

酸预处理对整体式催化剂载体性能的影响研究

通过使用不同浓度,不同类型的酸溶液,在不同条件下对堇青石载体进行预处理,考察了酸预处理前后载体本征性能的改变和对甲苯催化性能的影响,测试了其失重率,吸水率,上载率本征性能,并通过XRF,BET,SEM等手段进行表征测试分析.结果发现,通过使用20% HCl对堇青石载体进行加热处理3h,可获得最优性能的堇青石载体.吸水率较处理前可提升48.0%以上,活性组分上载率可达14.5%,皮尔逊检验表明吸水率与上载率存在中度正相关的相关性.通过对甲苯催化活性测试,其结果表明,通过酸预处理,堇青石载体比表面积提升10倍以上,由其制得的整体式催化剂催化降解甲苯的T₁₀和T₉₀分别为142和200℃.     

妊娠期全氟辛酸染毒对子代雄鼠发育毒性的研究

探讨妊娠期染毒全氟辛酸(perfluorooctanoic acid,PFOA)对子代雄鼠发育毒性的影响.将50只妊娠0 d小鼠随机分5组,每组10只,妊娠0~17 d每天按0、1、2.5、5和12.5 mg·kg~(-1)BW饲喂PFOA,产后仔鼠正常饲养,记录仔鼠存活数.产后21 d,检测仔鼠血清睾酮水平并计算睾丸指数;HE染色观察睾丸组织结构变化;RT-PCR法检测睾丸组织Dlk1-Dio3印记基因簇各目的基因mRNA的表达情况.结果显示,随PFOA染毒剂量增加,仔鼠存活数显著降低,血清睾酮含量极显著性降低(p0.01);睾丸指数无统计学意义;睾丸组织有不同程度的损伤并呈剂量依赖性;Dlk1-Dio3印记基因簇各目的基因的表达量都有降低趋势,其中Gtl2、Rian、Dio3均显著性降低(p0.05).结果表明,妊娠期染毒PFOA能够降低仔鼠存活数,损伤睾丸组织结构,并能够扰乱生殖激素,降低睾丸组织Dlk1-Dio3印记基因簇各目的基因mRNA的表达.     

磁性离子印迹聚合物的制备及其对水中Pb(Ⅱ)的吸附

以铅离子为模板离子、乙二醇二甲基丙烯酸酯和偶氮二异丁腈为交联剂和引发剂、稀盐酸为洗脱剂,采用微波辅助反相乳液悬浮聚合法,制备了磁性离子印迹聚合物(MIIP),通过SEM、FTIR、XRD和BET技术对其进行了表征,并将其用于水中Pb(Ⅱ)的吸附.在初始质量浓度60 mg/L、溶液pH 6、吸附温度303 K、吸附时间6...