富氧空位/梯次结构CeO2的制备及光催化CO2还原

采用Ce-BTC(均苯三甲酸)为模板,通过尿素溶液浸渍合成了具有富氧空位/梯次结构的CeO₂催化剂,并用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、拉曼光谱(Raman)和紫外可见漫反射(DRS)等手段对其进行了表征.结果表明,与金属有机框架(MOFs)浸渍尿素高温煅烧可以获得金属氧化物/g-C₃N₄复合材料不同,Ce-BTC/尿素体系煅烧后产品中未检测到g-C₃N₄,这可能与CeO₂的存在抑制了尿素分解产物的热缩聚过程,影响了g-C₃N₄的生成有关,但尿素的引入改变了Ce-BTC煅烧产物CeO₂的氧空位浓度,且获得梯次结构.将具有富氧空位/梯次结构的CeO₂-5用于光催化CO₂还原,催化结果表明:反应4h的CO产率可达2.06μmol/g,CH₄产率可达1.42μmol/g,性能是Ce-BTC未...     

Rain‐washing of foliar deposits of Dimilin®WP‐25 formulated in four different carrier liquids

Abstract

Dimilin^® WP‐25, a wettable powder formulation of diflubenzuron (DFB) [1‐(4‐chlorophenyl)‐3‐(2,6‐difluorobenzoyl) urea], was formulated in four different carrier liquids, viz., water; a light petroleum paraffinic oil, ID 585; a heavy paraffinic oil, Sunspray^® 7N; and a 1:2 mixture of a light petroleum aromatic solvent (Cyclosol^® 63) and canola oil; to provide four end‐use mixtures, Dim‐W, Dim‐585, Dim‐7N and Dim‐Cy‐C respectively, each containing 28 g of DFB per litre. Balsam fir branch tips clipped from greenhouse‐grown seedlings, and sugar maple branch tips clipped from field‐grown young trees, were exposed to uniform‐sized droplets (ranging in diameters from 135 to 190 μm) of the four end‐use mixtures which were atomized using a monodispersed droplet generator. Droplets were collected on the fir and maple branch tips and the initial residue per g fresh weight of foliage was determined by high‐performance liquid chromatography (HPLC). The branch tips were exposed to cumulative rainfall of 3, 6 and 10 mm at an intensity of 5 mm/h and at time intervals of 1, 12, 36 and 72 h after DFB treatment, to test the influence of ‘ageing’ of foliar residues on rainfastness. Foliar samples were collected for residue determination just before the onset of rainfall, and at 0.5 h post‐rain. DFB was quantified by the HPLC method. In the case of fir foliage, the Dim‐W formulation was the most susceptible to rain‐washing and the rainfastness did not increase with the ageing period of foliar deposits. In contrast, the three oil‐based mixtures showed greater rainfastness depending upon the carrier liquid and the ageing period. Rainfastness decreased in the order of Dim‐Cy‐C > Dim‐7N > Dim‐585 > Dim‐W. In contrast, the data on maple foliage indicated that the ageing of deposits increased the rainfastness of all the 4 end‐use mixtures. Dim‐585 was the most susceptible to rain washing, and rainfastness decreased in the order of Dim‐W > Dim‐Cy‐C > Dim‐7N > Dim‐585.     

AAS与ICP－AES间接测定天然水中硫酸盐

本文以与过量形成ＢａＳＯ＿４沉淀反应为基础，较详细地讨论了反应条件、从而拟定了用ＡＡＳ和ＩＣＰ－ＡＥＳ间接测定天然水中的方法、确定了方法的精密度，ＡＡＳ法的ＲＳＤ％为１．５，ＩＣＰ－ＡＥＳ法为３．２．两种方法对比分析的结果接近，误差为１．０％（相对）。用于天然水中的测定，获得满意的结果。     

WEP的安全技术分析及对策

在对无线局域网WLAN标准IEEE80 2 .11的WEP描述的基础上 ,笔者深入研究了WEP协议的设计上和实际应用中存在的密钥序列重复使用、消息认证和完整性等严重安全漏洞 ;详细分析了标准无线局域网中WEP协议解决方案 ;提出了WEP的改进算法WEP2 ,WEP2将IV大小增加到 12 8bit,以增强抗攻击能力 ;分析了AES解决方案的可行性 ;在密钥再生与分配方面 ,提出在MAC层实现经认证的密钥交换 ,用来改善WEP的安全脆弱性等解决措施。最后 ,还对今后的研究方向作出进一步的展望     

Prioritizing Wetland Restoration for Sediment Yield Reduction: A Conceptual Model

In a climate of limited resources, it is often necessary to prioritize restoration efforts geographically. The synoptic approach is an ecologically based tool for geographic prioritization of wetland protection and restoration efforts. The approach was specifically designed to incorporate best professional judgment in cases where information and resources are otherwise limited. Synoptic assessments calculate indices for functional criteria in subunits (watersheds, counties, etc.) of a region and then rank the subunits. Ranks can be visualized in region-scale maps which enable managers to identify areas where efforts optimize functional performance on a regional scale. In this paper, we develop a conceptual model for prioritizing watersheds whose wetlands can be restored to reduce total sediment yield at the watershed outlet. The conceptual model is designed to rank watersheds but not individual wetlands within a watershed. The synoptic approach is valid for applying the sediment yield reduction model because there is high demand for prioritizing disturbed wetlands for restoration, but there is limited, quantitative, accurate information available with which to make decisions. Furthermore, the cost of creating a comprehensive database is prohibitively high. Finally, because the model will be used for planning purposes, and, specifically, for prioritizing based on multiple decisions rather than optimizing a single decision, the consequence of prioritization errors is low. Model results cannot be treated as scientific findings. The conclusions of an assessment are based on judgement, but this judgement is guided by scientific principles and a general understanding of relevant ecological processes. The conceptual model was developed as the first step towards prioritizing of wetland restoration for sediment yield reduction in US EPA Region 4.     

乳酸和复合脂肪酸抑制奶牛对环境污染的效果分析

将20头荷斯坦产奶奶牛随机分为对照组和试验Ⅰ～Ⅲ组,对照组饲喂全混日粮(TMR),试验Ⅰ组每头奶牛每天饲喂TMR加150.0 g复合脂肪酸,试验Ⅱ组每头奶牛每天饲喂TMR加150.0 g乳酸,试验Ⅲ组每头奶牛每天饲喂TMR加150.0 g复合脂肪酸/乳酸(质量比为1∶1),分析探讨了复合脂肪酸和乳酸对奶牛粪尿、氮、总磷排泄量和CH4释放量的影响.结果表明,相比对照组,试验Ⅲ组1头奶牛1年CH4释放量减少30.64 kg,粪尿、氮、总磷排泄量分别减少1.43 t、28.32 kg和2.36 kg,标准乳(FCM)提高3.28%.在奶牛饲料中添加乳酸和复合脂肪酸的混合酸,能有效抑制奶牛对土壤、水体及空气的污染,显著提高奶牛的生态效益和经济效益.     

三江平原泥炭沼泽孔隙水甲烷浓度变化动态及其影响因子

湿地土壤孔隙水甲烷浓度变化动态对于揭示湿地碳循环过程具有重要作用.于2012年和2013年对三江平原毛苔草泥炭沼泽不同土壤深度孔隙水甲烷浓度的季节变化动态进行监测,并分析了其关键影响因子.结果表明:植物生长季孔隙水甲烷浓度呈单峰变化趋势,不同土层甲烷浓度峰值(80.45~490.95μmol·L-1)主要集中在湿润的生长季末,但年际间存在显著差异;从土壤剖面来看,土壤融通之后,孔隙水中甲烷浓度随着土壤深度的增加而增加;土壤表层(5 cm和10 cm)甲烷浓度主要受到株高(R2=0.6,p=0.005)和土壤充水孔隙率(R2=0.36,p=0.01)的影响,而深层(20~40 cm)甲烷浓度主要受到土壤温度等因素的综合影响.研究还表明,表层土壤孔隙水甲烷浓度能够解释生长季甲烷排放通量变化的26%~60%,而且短期的极端降雨事件可能不会对甲烷浓度以及甲烷排放产生即时影响,而是出现大约一周的延迟(time lag)现象,这主要取决于实际土壤湿度.     

甲烷氧化菌在填埋场覆盖层中的工程应用(Ⅱ):基质选择性及长效性

针对已筛选获得的甲烷氧化混合菌,选取填埋场覆盖土(LCS)、矿化垃圾(AR)和塘渣(TZ)3种填埋场周边易得的材料为供试生存基质,从基质选择性及长效性角度进行了甲烷减排应用条件的探究及使用效能评估.结果表明,在TZ、LCS、AR、TZ-AR和LCS-AR这5种生存基质中,TZ-AR最适合甲烷氧化混合菌的生长,且TZ与AR的复配比例以5∶5为最佳.甲烷氧化混合菌在TZ-AR的粒径≤4 mm和含水率为20%时具有最高甲烷氧化能力.一次性接种甲烷氧化混合菌在静态体系中的最佳使用有效期为31 d.其在接种量为0.08、0.16、0.20 m L·g-1和0.25m L·g-1时甲烷氧化速率无明显差异,从工程应用角度而言,8%的接种量为最佳.     

Enhanced bio-decolorization of 1-amino-4-bromoanthraquinone-2-sulfonic acid by Sphingomonas xenophaga with nutrient amendment

Bacterial decolorization of anthraquinone dye intermediates is a slow process under aerobic conditions. To speed up the process, in the present study, effects of various nutrients on 1-amino-4-bromoanthraquinone-2-sulfonic acid (ABAS) decolorization by Sphingomonas xenophaga QYY were investigated. The results showed that peptone, yeast extract and casamino acid amendments promoted ABAS bio-decolorization. In particular, the addition of peptone and casamino acids could improve the decolorization activity of strain QYY. Further experiments showed that L-proline had a more significant accelerating effect on ABAS decolorization compared with other amino acids. L-Proline not only supported cell growth, but also significantly increased the decolorization activity of strain QYY. Membrane proteins of strain QYY exhibited ABAS decolorization activities in the presence of L-proline or reduced nicotinamide adenine dinucleotide, while this behavior was not observed in the presence of other amino acids. Moreover, the positive correlation between L-proline concentration and the decolorization activity of membrane proteins was observed, indicating that L-proline plays an important role in ABAS decolorization. The above findings provide us not only a novel insight into bacterial ABAS decolorization, but also an L-proline-supplemented bioaugmentation strategy for enhancing ABAS bio-decolorization.     

Synthesis, crystal structure, photodegradation kinetics and photocatalytic activity of novel photocatalyst ZnBiYO4

ZnBiYO₄ was synthesized by a solid-state reaction method for the first time. The structural and photocatalytic properties of ZnBiYO₄ were characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy and UV-Vis diffuse reflectance. ZnBiYO₄ crystallized with a tetragonal spinel structure with space group I41/A. The lattice parameters for ZnBiYO₄ were a = b = 11.176479 Å and c= 10.014323 Å. The band gap of ZnBiYO₄ was estimated to be 1.58 eV. The photocatalytic activity of ZnBiYO₄ was assessed by photodegradation of methyl orange under visible light irradiation. The results showed that ZnBiYO₄ had higher catalytic activity compared with N-doped TiO₂ under the same experimental conditions using visible light irradiation. The photocatalytic degradation of methyl orange with ZnBiYO₄ or N-doped TiO₂ as catalyst followed first-order reaction kinetics, and the first-order rate constant was 0.01575 and 0.00416 min^-1 for ZnBiYO₄ and N-doped TiO₂, respectively. After visible light irradiation for 220 min with ZnBiYO₄ as catalyst, complete removal and mineralization of methyl orange were observed. The reduction of total organic carbon, formation of inorganic products, SO₄^2- and NO₃^-, and evolution of CO₂ revealed the continuous mineralization of methyl orange during the photocatalytic process. The intermediate products were identified using liquid chromatography- mass spectrometry. The ZnBiYO₄/(visible light) photocatalysis system was found to be suitable for textile industry wastewater treatment and could be used to solve other environmental chemical pollution problems.