太阳光催化氧化工艺对藻源含氮有机物的降解研究

利用小试试验研究了太阳光/TiO2体系对铜绿微囊藻细胞内的溶解性有机氮(DON)的氧化降解过程,考察了氧化降解过程中总可溶性蛋白、多糖、UV254等指标的变化,分析了其作用机理.结果表明,7h处理后,太阳光/TiO2体系对水样中的DON降解率为29%,且降解过程中TN含量基本没有变化,而NH4+和NO3-的浓度明显增加;氧化过程中,总可溶性蛋白和多糖的含量明显减少,去除率达48.6%和54.5%.水样的浑浊度、UV254和DOC也有不同程度的去除.     

等离子改性CNT/TiO2电极吸附去除水中苯酚的研究

利用电感耦合空气等离子体对涂覆法制备的CNT/TiO2复合电极进行射频放电改性处理.复合电极的表面形貌、润湿性及元素成分分别通过扫描电镜(SEM)、接触角测试仪、x射线光电子能谱(XPS)进行了表征.结果表明,改性后有利于苯酚吸附,电极比表面孔隙、亲水性、TiO2及含氧官能团均得以增加;循环伏安测试(CV)表明改性后电极比电容提高54%;改性后复合电极对苯酚的吸附量较改性前提高了45%.且等离子改性CNT/TiO2电极对苯酚的去除量随电压、苯酚初始浓度的增加而增加,吸附过程符合准二级动力学方程,吸附等温线符合Langmuir等温吸附模型.     

广东省能源消费碳排放分析及碳排放强度影响因素研究

根据省级能源统计和温室气体核算规则,计算分析了2005~2012年广东省能源消费碳排放和碳排放强度变化,并应用对数平均迪氏指数法对计算期的碳排放强度变化进行因素分解,定量分析了各产业(部门)能耗强度、产业结构、能源消费结构和能源碳排放系数对广东省碳排放强度变动的影响.结果表明:2005~2012年,广东省能源消费CO2排放年均增长6.28%,单位GDP碳排放累计下降27%,各产业(部门)能耗强度下降是推动碳排放强度下降的主要原因;净外购电力的碳排放系数下降及用作原材料石油消费比重上升也有利于单位GDP碳排放下降;产业结构和能源消费结构总体上朝着不利于碳排放强度下降的趋势发展;生活能源消费年均增速低于GDP年均增速,有利于地区碳排放强度下降.     

稀土Ce3+掺杂Bi2WO6光催化降解罗丹明B的研究

采用水热合成法制备稀土元素Ce3+掺杂Bi2WO6光催剂,通过X射线衍射、场发射电镜扫描、紫外-可见漫反射光谱、N2物理吸附-脱附等手段对合成材料的结构、形貌、光吸收等物理化学性能进行表征,并以染料废水中罗丹明B的降解考察其光催化活性.结果表明,Ce3+掺杂量为0.05%时,其结晶度好、颗粒较均匀、具有较强的可见光吸收性能,且比表面积比纯Bi2WO6提高近10%以上,对罗丹明B的去除效果最好;催化剂用量越高、罗丹明B的初始浓度越低、反应溶液pH值越低、H2O2的浓度越高越有利于Ce/Bi2WO6对罗丹明B的吸附和降解;而阴阳离子的影响各不相同:NO3-、SO42-没有太大的影响; Na+、K+、Ca2+、Mg2+、Cl-的加入均促使的染料的去除;HCO3-抑制了罗丹明B的吸附,但是却促进了光降解.另外,经重复使用3次,光催化降解速率常数并没有降低,表明稀土Ce3+改性Bi2WO6是一种有效稳定的光催化剂.     

不同煅烧温度制备TiO_2及光解2-氯苯甲酸

为了考察煅烧温度对TiO2结构和光催化活性的影响,以酞酸丁酯作为前驱体,利用溶胶-凝胶法在不同煅烧温度下制备TiO2,并用亚甲基蓝测试其光催化活性。TG热重分析表明,450~700℃时TiO2有晶型变化,XRD表征说明,TiO2晶型受煅烧温度影响显著,其中450~600℃煅烧制备的TiO2为锐钛矿型,650℃煅烧时TiO2出现金红石晶型;亚甲基蓝光解实验结果表明,煅烧温度显著影响TiO2的光催化活性,其中,450~600℃煅烧TiO2对亚甲基蓝光解效果较好,光降解2.5h后降解率高达95%~97%;550℃煅烧制备的锐钛矿型TiO2对2-氯苯甲酸有一定光解催化效果,紫外光解4h后降解率高达80%左右,光解过程符合零级动力学模式。     

氧化/膜过滤工艺处理屠宰废水研究

研究了二氧化氯(Cl O2)氧化/陶瓷超滤膜过滤工艺对屠宰废水的处理效果,对比不同Cl O2投加量、反冲条件(反冲周期、反冲时间等)对产水指标的影响,确定适宜参数。结果表明:其他条件相同,Cl O2投加量140 mg/L时,氧化单元COD去除率较高;反冲周期50 min、反冲时间50 s时渗透通量恢复较好,陶瓷膜装置运行效果最优,COD和浊度的总去除率分别达93.6%、95.8%,产水水质可达标排放,且运行总成本较低,有较好的工业推广前景。     

Effect of metal ion-doping on characteristics and photocatalytic activity of TiO2 nanotubes for removal of humic acid from water

The effect of ion-doping on TiO₂ nanotubes were investigated to obtain the optimal TiO₂ nanotubes for the effective decomposition of humic acids (HA) through O₃/UV/ion-doped TiO₂ process. The experimental results show that changing the calcination temperature, which changed the weight fractions of the anatase phase, the average crystallite sizes, the Brunauer-Emmett-Teller surface area, and the energy band gap of the catalyst, affected the photocatalytic activity of the catalyst. The ionic radius, valence state, and configuration of the dopant also affected the photocatalytic activity. The photocatalytic activities of the catalysts on HA removal increased when Ag⁺, Al³⁺, Cu²⁺, Fe³⁺, V⁵⁺, and Zn²⁺ were doped into the TiO₂ nanotubes, whereas such activities decreased as a result of Mn²⁺- and Ni²⁺-doping. In the presence of 1.0 at.% Fe³⁺-doped TiO₂ nanotubes calcined at 550°C, the removal efficiency of HA was 80% with a pseudo-first-order rate constant of 0.158 min⁻¹. Fe³⁺ in TiO₂ could increase the generation of ·OH, which could remove HA. However, Fe³⁺ in water cannot function as a shallow trapping site for electrons or holes.     

Efficient dechlorination of 2,4-dichlorophenol in an aqueous media with a mild pH using a Pd/TiO2NTs/Ti cathode

In this study, palladium-loaded titania nanotubes was fabricated on a titanium plate (Pd/TiO₂NTs/Ti) for efficient electrodechlorination of 2,4-chlorophenol with a mild pH condition. The nature of Pd/TiO₂NTs/Ti electrodes was characterized by field-emission scanning electron microscope (FESEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and cyclic voltammetry (CV) techniques. The characterization results indicated the generation of Pd⁰ nanoparticles which were evenly dispersed on titania nanotubes arrays on the Pd/TiO₂NTs/Ti surface. An effective degradation efficiency of up to 91% was achieved within 60 min at cathode potential of −0.7 V (vs. SCE) and initial pH of 5.5. The effects of the applied cathode potential and initial pH on the degradation efficiency were studied. A near neutral condition was more favorable since very low and very high pHs were not conducive to the dechlorination process. Furthermore, the intermediates analysis showed that the Pd/TiO₂NTs/Ti electrode could completely remove chlorine from 2, 4-dichlorophenol since only phenol was detected as the byproduct and the concentration of released chlorine ions indicated near-complete dechlorination. This work presents a good alternative technique for eliminating persistent chlorophenols in polluted wastewater without maintaining strong acidic environment.     

覆膜滤料特性实验研究

覆膜滤料是降低微细颗粒物排放,降低大气环境中PM2．5浓度源头的净化技术之一。对氟美斯（FMS ）针刺毡为基布覆膜滤料,进行了表面微观结构电镜扫描,同时,进行了这种滤料的阻力实验测试和分级效率测试。表面电镜扫描结果显示,覆膜呈微孔且直径为0．5μm左右的多层铰链结构。实验结果表明,覆膜滤料周期性清灰后阻力为1200 Pa ,万次老化实验后覆膜滤料阻力是1163．3 Pa;在过滤风速为1．4 m／min时,滤料对PM2．5的过滤效率高于99％。实验结果对使用覆膜滤料的布袋除尘器设计具有一定指导意义。     

Zn2+对SBR单级好氧模式生物除磷性能的影响

以合成废水为研究对象,以丙酸盐为单一外加碳源,通过比较进水中不同Zn2+浓度(0,1,5,10,20mg/L)下单级好氧模式下序批式反应器(SBR)的除磷效果,考察进水Zn2+浓度对单级好氧SBR生物除磷性能的影响,并通过分析各反应器中典型周期内磷及微生物体内储能物质的变化,探究Zn2+对单级好氧SBR生物除磷性能的影响机理.当进水Zn2+浓度为0和1mg/L时,除磷率分别高达96.84%和97.90%.当进水Zn2+浓度为5,10,20mg/L时,系统除磷率分别为89.32%,76.43%和57.29%,说明较高浓度Zn2+对单级好氧SBR生物除磷有抑制作用.结果表明,较高浓度Zn2+可抑制COD的降解,微生物体内聚羟基脂肪酸酯好氧合成及磷酸盐激酶活性,并促进GAOs的代谢,使聚磷合成和水解量减少,从而降低系统的除磷性能.