掘进巷道瓦斯分布数值实验研究

根据局部通风流场特点确定适合矿井局部通风掘进巷道工作面瓦斯与风流质量交换的数学模型,在近壁面使用标准壁面函数法解决近壁面的流动,在湍流充分发展区,使用RNG k-ε双方程湍流模型;讨论考虑巷道支护的情况下壁面粗糙度的影响,确定矿井掘进工作面局部通风模型网格划分的方法、掘进头瓦斯涌出的边界条件;利用计算流体力学(CFD)软件Fluent对掘进工作面的风流与瓦斯的混合过程进行了模拟;得出不同瓦斯涌出量情况下掘进巷道工作面风流分布和瓦斯浓度的分布规律。研究表明:瓦斯涌出量和风速对流场分布有影响,随着瓦斯涌出量的增大和风速的降低,瓦斯对流场的影响越来越明显。     

Using Measurements of Nitrogen Oxides to Estimate the Emission Controls Required to Meet the UK Nitrogen Dioxide Standard

In this paper we introduce a new method of analysing the relationship between nitrogen dioxide (NO₂) and oxides of nitrogen (NO_x) concentrations using data from the UK National Air Quality Archive. The study includes analyses of measurements from two different types of site in London, a kerbside site: Cromwell Rd, and three background sites: Bridge Place, London Bloomsbury and West London, over several years (1991–7). The data in some years showed that hourly NO₂ concentrations exceeded the UK Standard of 150 ppb. Data were binned, averaged, and polynomials fitted at each site. Analysis of the resulting polynomials was used to estimate reductions in NO_x emission required to achieve the National Air Quality Strategy Objective. Examination of the empirical ratio NO₂:NO_x (the 'yield') gives an indication of the sensitivity of the NO₂ to NO_x controls and the amount of NO₂ that would arise from modelled values of total oxides of nitrogen. The response of NO₂ to emission changes is very non-linear, implying 30–45% controls on NO_x may be required.     

兰州市气溶胶中金属与非金属元素的污染规律

通过对兰州市空气飘尘中粗、细颗粒物上化学元素的分布规律与特征的分析 ,指出了细颗粒物 (PM2 .5 )是一些有毒有害元素的主要携带者。这是可以在肺泡沉积 ,并能直接进入血液循环 ,对人体产生危害的重要部分     

四城市空气粗、细颗粒物元素质量谱及富集特征

以武汉市 X荧光光谱分析数据为例 ,介绍了粗、细颗粒物中元素的质量谱及富集特征。并且 ,比较了广州、武汉、兰州、重庆四城市的污染元素及可能污染元素的某些富集特征     

Analysis of gross alpha, gross beta activities and beryllium-7 concentrations in surface air: their variations and statistical prediction model

Measurement of gross α, gross β activities and cosmogenic beryllium-7 (⁷Be) concentrations were made both daily and weekly during the years 2001–2004 from samples of atmospheric aerosols filtered from the air at Tehran Nuclear Research Center (35 41′ N) and Zahedan (28 29′ N). Weekly aerosol samples collected with the high-volume air samplers on cellulose filters were used to determine the ⁷Be contents of samples, using a semiconductor gamma spectrometer. Airborne dust samples were collected daily on fiber glass filters and used to determine the gross β and gross α activities with automatic beta analyzer and a ZnS(Ag) counter, respectively. In this work, the concentration and meteorological data were used to determine models for gross α, gross β and ⁷Be. The air concentrations of gross β and gross α activities and ⁷Be concentrations displayed lognormal distributions during the study period. Both β and ⁷Be have maximum activity concentrations during warm mid-year months.     

拉曼光谱在比较水中杂质浓度的研究

为了比较不同水样品中所含杂质浓度的相对大小,运用激光拉曼光谱的分析方法,测量了四种不同水样品的激光拉曼光谱,同时还测量了蒸馏水的激光拉曼光谱.计算了它们的弯曲振动强度与伸缩振动强度之比,并对测量和计算结果进行了比较和分析.结果表明,水中所舍杂质浓度的相对大小不仅可以从其拉曼谱杂峰和毛刺的多少做定性比较,而且还可以从弯曲振动强度与伸缩振动强度的比值的相对大小做定量比较.这为水质分析提供了新的有效途径.     

Amplification of plasmid DNA bound on soil colloidal particles and clay minerals by the polymerase chain reaction

Polymerase chain reaction(PCR)was used to amplify a 600-base pair(bp)sequence of plasmid pGEX-2T DNA bound on soil colloidal particles from Brown soil(Alfisol)and Red soil(Ultisol),and three different minerals(goethite,kaolinite,montmorillonite). DNA bound on soil colloids,kaolinite,and montmorillonite was not amplified when the complexes were used directly but amplification occurred when the soil colloid or kaolinite-DNA complex was diluted,10- and 20-fold.The montmorillonite-DNA complex required at least 100-fold dilution before amplification could be detected.DNA bound on goethile was amplified irrespective of whether the complex was used directly,or diluted 10- and 20-fold.The amplification of mineral-bound plasmid DNA by PCR is,therefore,markedly influenced by the type and concentration of minerals used.This information is of fundamental importance to soil molecular microbial ecology with particular reference to monitoring the fate of genetically engineered microorganisms and their recombinant DNA in soil environments.     

Number concentration and size distributions of submicron particles in Jinan urban area： Characteristics in summer and winter

The aerosol number concentration and size distribution were measured with the newly developed Wide-range Particle Spectrometer in summer and winter of 2006 at the urban site of Jinan City.Here reported the characteristics of fine particles of the different observation seasons.Relative high number concentrations for the particles in the diameter range of 10-500 nm were observed in both seasons.It was found that the dominant number distributed in particle diameter smaller than 100 nm and the percentage over the number concentration of all air particles is much higher than what has been measured in other urban sites over the world.The number mean diameter in summer was much smaller than in winter,strongly suggesting the different origin of ultrafine particles in different seasons.That is, particles in ultrafine mode mainly came from nucleation and new particle formation in summer while from traffic emission in winter. The diurnal variation also supported this point.Number concentration in the diameter range of 10-200 nm got their peak values at noontime,well correlated with the mixing ratio of SO_2 and the intensity of solar radiation in summer.While in winter,those in the same diameter range showed the main peaks during the traffic hours happened in the morning and evening.     

Indoor Air Quality at Rural and Urban Sites in Pakistan

In the developing world, the vast majority of people rely on solid biomass fuels for cooking and heating which results in poor indoor air quality. The present study determined indoor air quality in some rural and urban areas of Pakistan. Measurements were made of particulate mass (PM10, PM2.5 and PM1), number concentration and bioaerosols in different micro environments. PM10 concentrations of up to 8,555 μg/m³ were observed inside the kitchens where biofuels were used as energy source. Cleaning and smoking was identified as a major source of indoor particulate pollution and concentrations of more than more than 2,000 μg/m³ were recorded in the living room during these activities. Indoor number concentrations in Lahore were typically greater than those observed outdoors in European cites. At a rural site the highest Colony Forming Units (CFUs) were in the 0.5 μm–2 μm size fraction, while at the urban location CFUs were dominant for 2 μm–16 μm. It was observed that CFUs(Colony Forming Units) counts were higher inside living rooms than kitchens. It is important to note that women and children were exposed to extremely high levels of particulates during cooking. Overall, indoor air quality in Pakistan was poor and there is a dire need to take a serious step to combat with it.     

Laboratory longitudinal diffusion tests: 1. Dimensionless formulations and validity of simplified solutions

To obtain reliable diffusion parameters for diffusion testing, multiple experiments should not only be cross-checked but the internal consistency of each experiment should also be verified. In the through- and in-diffusion tests with solution reservoirs, test interpretation of different phases often makes use of simplified analytical solutions. This study explores the feasibility of steady, quasi-steady, equilibrium and transient-state analyses using simplified analytical solutions with respect to (i) valid conditions for each analytical solution, (ii) potential error, and (iii) experimental time. For increased generality, a series of numerical analyses are performed using unified dimensionless parameters and the results are all related to dimensionless reservoir volume (DRV) which includes only the sorptive parameter as an unknown. This means the above factors can be investigated on the basis of the sorption properties of the testing material and/or tracer. The main findings are that steady, quasi-steady and equilibrium-state analyses are applicable when the tracer is not highly sorptive. However, quasi-steady and equilibrium-state analyses become inefficient or impractical compared to steady state analysis when the tracer is non-sorbing and material porosity is significantly low. Systematic and comprehensive reformulation of analytical models enables the comparison of experimental times between different test methods. The applicability and potential error of each test interpretation can also be studied. These can be applied in designing, performing, and interpreting diffusion experiments by deducing DRV from the available information for the target material and tracer, combined with the results of this study.