大气过氧化氢及有机过氧化物的测定

采用ＨＰＬＣ柱后衍生荧光法测定了５、６月份中关村地区大气中的Ｈ２Ｏ２和有机过氧化物,除Ｈ２Ｏ２外,共测出了７种以上有机过氧化物。有３种通过ＨＰＬＣ色谱保留时间得到了鉴定。分别是甲基过氧化氢,羟甲基过氧化氢和乙基过氧化氢。     

污水处理系统臭气污染问题的研究

通过对污水处理系统中臭气来源和特征的分析 ,系统地阐述臭气产生的原因和测定、处理方法 ,指出对臭气控制是今后污水处理系统发展的方向之一。     

碳组分不同监测分析技术的比较

采用在线监测和实验室分析方法,分别在热光透射法(TOT)NIOSH 5040、870升温协议和热光反射法(TOR)IMPROVE-A升温协议下测定PM_2.5中有机碳(OC)、元素碳(EC),并将各测定结果做比对分析。结果表明,在线监测(NIOSH 5040)与实验室分析(IMPROVE-A)结果的相关系数R>0.8,总体相关性较好,EC值差异略大;在线监测与实验室分析在NIOSH 870协议下TC测定值总体相近,OC与EC测定值略有差异;在线监测中NIOSH 5040协议下的OC测定值略低于870协议,EC测定值略高于870协议,日常监测中两种温度协议均可选择。     

不同情境下中国碳排放权交易市场的风险度量

以深圳、湖北、广东、上海及北京5个碳交易中心2015～2020年的日交易数据为基础,设置了Ave、Med、Max、Min4种交易情境,采用TGARCH-VaR模型对不同情境下的碳排放权交易市场风险进行了研究.结果表明,不同情境下碳排放交易市场风险存在差异,各情境的市场稳定性、政策响应度均存在一定规律:Ave情境碳现货收...     

Identification, analysis and dissemination of information on near misses: A case study in the construction industry

Near misses are well-known for providing a major source of useful information for safety management. They are more frequent events than accidents and their causes may potentially result in an accident under slightly different circumstances. Despite the importance of this type of feedback, there is little knowledge on the characteristics of near misses, and on the use of this information in safety management. This article proposes guidelines for identifying, analyzing and disseminating information on near misses in construction sites. In particular, it is proposed that near misses be analyzed based on four categories: (a) whether or not it was possible to track down the event; (b) the nature of each event, in terms of its physical features (e.g. falling objects); (c) whether they provided positive or negative feedback for the safety management system; and (d) risk, based on the probability and severity associated with each event. The guidelines were devised and tested while a safety management system was being developed in a healthcare building project. The monitoring of near misses was part of a safety performance measurement system. Among the main results, a dramatic increase in both the number and quality of reports stands out after the workforce was systematically encouraged to report. While in the first 4 months of the study – when the workforce was not encouraged to report – there were just 12 reports, during the subsequent 4 months – when the workforce was so encouraged – there were 110 reports, all of them being analyzed based on the four analytical categories proposed.     

乳化炸药密度在线检测技术

简述了常见密度在线检测方法,提出了一种采用数字称重技术间接在线测量炸药密度的新方法,建立了乳化炸药密度数字在线检测与控制系统,包括系统硬件电路的设计、硬件和电气线路的安装,以及软件程序连接和调试.研究表明,样品质量与检测系统的数字输出存在良好的线性关系,测量精度满足要求.因此,该系统可实现乳化炸药密度的在线实时测定,同时还可通过PLC实现敏化效果的自动反馈与调控,从而保证乳化炸药的敏化效果和产品质量.     

海洋风电场水下噪声评估与管理研究

总结了海洋风电场建设中水下噪声的主要类型与声学特性,基于国内外水下噪声对海洋生物影响的最新研究成果,分析了海洋风电场噪声对生态环境的可能影响,尤其是近岸海域海洋风电施工期冲击式打桩噪声对海洋生物的影响。在此基础上,参考《海上风电工程环境影响评价技术规范》的相关内容,提出了海洋风电场水下噪声测量与评估方法,以及控制与降低噪声的措施建议。     

甘肃省农业高质量发展水平测度及制约因子研究

结合农业高质量发展的特征,构建农业高质量发展评价指标体系,采用熵值法、障碍因子诊断模型对甘肃省2009—2018年农业高质量发展水平和制约因素进行分析。结果发现:①2009—2018年,甘肃省农业高质量发展综合水平整体呈增长态势,但农业发展质量不高。②农业绿色发展和农业科技创新是甘肃省农业高质量发展的主要短板。③人力资本和生态环境保护是制约甘肃省农业高质量发展的主要因素。基于研究结果,提出强化政府职能、培育和引进高质量农业人才、贯彻新发展理念、构建生态补偿机制等加快甘肃省农业高质量发展的政策建议。     

多参数指示南极普里兹湾浮游植物的时空变化

以南极普里兹湾沉积物为研究对象,运用气相色谱技术,研究了生物标志物菜子甾醇、甲藻甾醇、长链烯酮对应指示的硅藻、甲藻、颗石藻等浮游植物的生产量和种群结构的历史变化,结合2001—2011年实测和遥感水体ρ(Chla)(Chla为叶绿素a)及SST(海水表层温度)数据,探讨了该湾浮游植物生产量时空变化特征及其影响因素. 结果表明:过去100多年间南极普里兹湾浮游植物总生产量(212.04~759.10 ng/g)〔以w(菜子甾醇)+w(甲藻甾醇)+w(长链烯酮)计〕和w(硅藻)所占比例(62.28%~87.13%)〔以w(菜子甾醇)所占比例计〕均呈上升趋势,而w(甲藻)所占比例(10.09%~27.98%)〔以w(甲藻甾醇)所占比例计〕和w(颗石藻)所占比例(1.97%~9.74%)〔以w(长链烯酮)所占比例计〕则呈下降趋势. 全球变暖背景下浮游植物种群变动通过改变南大洋对CO₂的吸收进而影响全球碳循环. 水体ρ(Chla)与沉积生物标志物指示的浮游植物总生产量均具有湾内高、湾外低的空间分布特征. 湾内ρ(Chla)与SST的年际变化趋势相似,二者以2002—2003年和2009—2010年相对较高,SST分别为-0.30和0.01 ℃,ρ(Chla)分别为1.69和2.31 mg/m3;以2001—2002年和2010—2011年相对较低,SST分别为-1.19和-0.95 ℃,ρ(Chla)分别为1.08和0.79 mg/m3,表明该湾SST变化可较明显地影响浮游植物的生长.      

A guide for assessing control room operator performance using speed and accuracy,perceived workload,situation awareness,and eye tracking

In the petrochemical industry, control room operators must address safety-critical alarms and other tasks using complex interfaces. This study developed a guide for assessing human performance using standard human factors measurement tools, and tested the sensitivity of those tools with two interface designs (i.e., gray and black) at three levels of workload (i.e., easy, medium, and difficult). The guide measures human performance through speed and accuracy, perceived workload using two standard instruments (i.e., NASA Task Load Index (NASA-TLX) and Subjective Workload Assessment Technique (SWAT)), situation awareness through the Situation Awareness Global Assessment Technique (SAGAT), and gaze through eye tracking coordinates. Twelve engineering student participants completed one simulation session at each of the three workload levels using one of two interface designs. Workload was manipulated through the number of simulated events (failures) in each session. Overall, the speed and accuracy measures, workload ratings, and eye tracking showed sensitivity to differences in workload level, and situation awareness showed sensitivity to the interaction between workload level and interface type. None of the tools were sensitive to interface type alone. Accuracy was highest under easy workload. Time per failure decreased at higher workload levels. Perceived workload ratings from the SWAT increased as workload increased, but workload ratings from the NASA-TLX were not different across workload levels. When workload increased, situation awareness remained steady for the gray interface but decreased sharply for the black interface, illustrating an interaction effect. Finally, the percentage of time spent looking at different areas of the screen during steady-state periods differed among workload levels. The tools in this guide can be used in the petrochemical industry to make design decisions for control room interfaces when workload levels are a concern.