Trihalomethanes formation in water treatment plants and distribution lines: a monitoring and modeling scheme

Monitoring and modeling of the concentrations of trihalomethanes (THMs) within four water treatment plants (WTPs) and distribution lines in Fayoum City, Egypt, were studied. Sampling sites for raw and treated waters were determined by global positioning system and the Arc geographic information system software was used for mapping. THMs were monitored using 25 sampling points located at the plant exit and through the distribution lines up to the plant extremity. Results indicated that the THMs concentration varied significantly but it was very rarely higher than the allowed maximum contaminant level of 100 μg L^?1. However, at the dead zones in the distribution lines, the THMs increased by about 160% compared to in-plant level. Furthermore, the level of THMs in hot months was about 1.3 times higher than in cold ones. The influence of some independent variables such as temperature, pH, ammonia concentration, total organic carbon and color were investigated by Pearson model to find their correlation with the rate of THMs formation in WTPs. The resulted R values ranged from 0.81 to 0.98. Successful application of the model to a selected region on the distribution lines has resulted in a correlation coefficient of 0.98.     

Oxidative stress in the freshwater cyprinid crucian carp (Carassius carassius L.) upon chronic exposure to endosulfan

Oxidative stress and antioxidant responses of crucian carp, upon chronic exposure to endosulfan, were evaluated in vivo. The lethal concentration (LC_50–96?h) was 70 μg L^?1; on its basis, the fish were exposed to endosulfan at 20, 35, and 50 μg L^?1 and autopsy was done on days 1, 2, 3, 4, 7, 14, 21, 28, and 35. Lipid peroxidation was induced in a concentration-dependent manner, being highest at 50 μg L^?1 (3/4 LC_{50–96 h}, sub-lethal concentration-I, SL-I) on day 4 (720% versus control), followed in its extent (490%) at 30 μg L^?1 (1/2 LC_{50–96 h}, sub-lethal concentration-II, SL-II) on day 7 and lowest (260%) at 10 μg L^?1 (1/4 LC_{50–96 h}, sub-lethal concentration-III, SL-III) on day 14. Glutathione showed a concentration- and time-dependent elevation in the initial phase, with highest level on day 4 (180%) at SL-I, but showed significant reduction in all test concentrations from day 21 of post-exposure. Superoxide dismutase was decreased significantly throughout the study, with highest reduction (63%) on day 4 at SL-I; catalase increased in all test concentrations up to day 14 but showed a significant decrease from the day 28 of post-exposure. The potential role of these parameters as indicators of pesticide pollution in aquatic systems is discussed.     

Toxic substances: Measures and measurements†

The formulation of a sound policy for environmental protection and toxic substances control requires knowledge of the presence and concentration of environmental contaminants. For this reason monitoring programs have been set up in the Netherlands for water, drinking water, and air pollution. The Netherlands system for air pollution, monitoring of the substances SO2, NOχ, CO, O₃ is now fully automated. Some examples will be given to show the acquisition and management and interpretation of air pollution measurements.

Various smaller projects, supported by the Department of Health and Environmental Protection include measurement of indoor air‐contaminants, contaminants in soil and hazardous waste sites, and contaminants in biotic samples such as for instance PCB's in eels and seals and mussels. Moreover a Coordinating Committee regularly collects measurements from various sources in the Netherlands regarding pesticide residues and contaminants in food.

For cost‐effective monitoring the accuracy of the measurements must be chosen with regard to the biological effect concentration of the pollutant. The necessity of proper control measurements to establish background levels and the necessity of ring‐tests to increase interlaboratory reproducibility is discussed. In cost‐effective monitoring the minimum number of measurements, which are necessary to check the effect of environmental protection measures, must be defined through proper sampling.     

A model for approving and controlling sea water pollution for recreational activity

A model for assessing approval of a beach for recreational water activity was proposed. The model is based upon a sanitary survey together with intensive microbiological monitoring three times a day, five times a week for a month. In highly populated areas, continuous surveys once a day, five days a week are needed in order to assure the cleanliness and safety of these beaches.

Due to our intensive monitoring system, we can assure that Tel‐Aviv has one of the cleanest beaches near a metropolitan area in the Mediterranean Sea.     

Evaluation of the use of bioaccumulation and biological effects tools in caged mussels,within the European Water Framework Directive

Bioaccumulation and biological effects of pollution were assessed in mussels (Mytilus galloprovincialis) caged for one month at three sites in the Oiartzun estuary (south-eastern Bay of Biscay, Spain) with the aim of evaluating their usefulness within the investigative monitoring defined in the European Union Water Framework Directive (WFD). The highest concentrations of organic contaminants determined in mussels' tissue were detected towards the inner part of the estuary but no gradient pattern was found for metal bioaccumulation. Population fitness responses measured as condition index, stress on stress and gonad index were similar in all caged mussels and did not follow the organic pollution gradient. However, biomarkers determined at tissue, cell and protein level (histopathology, micronuclei frequency, malondialdehyde levels and vitellogenin-like protein levels) revealed a higher stress syndrome at the inner part of the estuary showing signs of genotoxicity, oxidative stress and endocrine disruption. Overall, the integrated chemical–biological approach in connection with mussel caging technique proved to be a useful tool to assess environmental pollution, allowing a better understanding of the cause–effect relationship within the investigative monitoring defined in the WFD.     

A new generation of coastal monitoring platforms

The need for new instruments and systems for environment monitoring encouraged the development of a network of coastal platforms combining a high versatility with ease of use and affordability. Almost every instrument can be fitted on the platforms, thanks to the large amount of available power provided by both solar panels and wind generators. All the platforms host a pumping system that pumps water from five depths into a measurement chamber where a multiparametric probe is fitted and from where other devices (e.g. samplers or analysers) can draw samples. In situ temperature measurements are provided at the same pumping depths. A colorimetric nutrient analyser and a meteorological station complete the basic equipment. On one of the platforms, a remotely controlled water sampler and an ADCP are also fitted. The data-acquisition and transmission system enables the platform to be controlled remotely using a special macro-commands set. Several examples of use are presented.     

两栖动物监测方法和国外监测计划研究

两栖动物是生物多样性的重要组成部分,对环境变化非常敏感,可被用作环境监测的指示物种.介绍了两栖动物监测的指标、时间、频次以及监测的主要方法,包括目视遇测法、样线（带）法、繁殖区调查法、鸣叫调查法、围栏陷阱法、人工庇护所法、人工隐蔽物法和标志重捕法,分析了各种方法的适用性和局限性;还详细介绍了国外比较成熟的2个两栖动物监测计划——美国两栖动物监测计划和英国两栖爬行动物监测计划.     

Effect of Monitoring Technique on Quality of Conservation Science

Monitoring free‐ranging animals in their natural habitat is a keystone of ecosystem conservation and increasingly important in the context of current rates of loss of biological diversity. Data collected from individuals of endangered species inform conservation policies. Conservation professionals assume that these data are reliable—that the animals from whom data are collected are representative of the species in their physiology, ecology, and behavior and of the populations from which they are drawn. In the last few decades, there has been an enthusiastic adoption of invasive techniques for gathering ecological and conservation data. Although these can provide impressive quantities of data, and apparent insights into animal ranges and distributions, there is increasing evidence that these techniques can result in animal welfare problems, through the wide‐ranging physiological effects of acute and chronic stress and through direct or indirect injuries or compromised movement. Much less commonly, however, do conservation scientists consider the issue of how these effects may alter the behavior of individuals to the extent that the data they collect could be unreliable. The emerging literature on the immediate and longer‐term effects of capture and handling indicate it can no longer be assumed that a wild animal's survival of the process implies the safety of the procedure, that the procedure is ethical, or the scientific validity of the resulting data. I argue that conservation professionals should routinely assess study populations for negative effects of their monitoring techniques and adopt noninvasive approaches for best outcomes not only for the animals, but also for conservation science. Efecto de la Técnica de Monitoreo en la Calidad de la Ciencia de la Conservación     

Monitoring,imperfect detection,and risk optimization of a Tasmanian devil insurance population

Most species are imperfectly detected during biological surveys, which creates uncertainty around their abundance or presence at a given location. Decision makers managing threatened or pest species are regularly faced with this uncertainty. Wildlife diseases can drive species to extinction; thus, managing species with disease is an important part of conservation. Devil facial tumor disease (DFTD) is one such disease that led to the listing of the Tasmanian devil (Sarcophilus harrisii) as endangered. Managers aim to maintain devils in the wild by establishing disease‐free insurance populations at isolated sites. Often a resident DFTD‐affected population must first be removed. In a successful collaboration between decision scientists and wildlife managers, we used an accessible population model to inform monitoring decisions and facilitate the establishment of an insurance population of devils on Forestier Peninsula. We used a Bayesian catch‐effort model to estimate population size of a diseased population from removal and camera trap data. We also analyzed the costs and benefits of declaring the area disease‐free prior to reintroduction and establishment of a healthy insurance population. After the monitoring session in May–June 2015, the probability that all devils had been successfully removed was close to 1, even when we accounted for a possible introduction of a devil to the site. Given this high probability and the baseline cost of declaring population absence prematurely, we found it was not cost‐effective to carry out any additional monitoring before introducing the insurance population. Considering these results within the broader context of Tasmanian devil management, managers ultimately decided to implement an additional monitoring session before the introduction. This was a conservative decision that accounted for uncertainty in model estimates and for the broader nonmonetary costs of mistakenly declaring the area disease‐free.     

Effect of housing geometry on the performance of Chemcatcher passive sampler for the monitoring of hydrophobic organic pollutants in water

Passive sampling of pollutants in water has been gaining acceptance for environmental monitoring. Previously, an integrative passive sampler (the Chemcatcher) was developed and calibrated for the measurement of time weighted average concentrations of hydrophobic pollutants in water. Effects of physicochemical properties and environmental variables (water temperature and turbulence) on kinetic and thermodynamic parameters characterising the exchange of analytes between the sampler and water have been published. In this study, the effect of modification in sampler housing geometry on these calibration parameters was studied. The results obtained for polycyclic aromatic hydrocarbons show that reducing the depth of the cavity in the sampler body geometry increased the exchange kinetics by approximately twofold, whilst having no effect on the correlation between the uptake and offload kinetics of analytes. The use of performance reference compounds thus avoids the need for extensive re-calibration when the sampler body geometry is modified.