多环芳烃的同步荧光光谱技术及其对尿样中多环芳烃的鉴别

荧光光谱技术是一种灵敏度高和选择性强的光度分析方法,特别是对广泛存在于环境中的多环芳烃类化合物(PAHs)是一种有力的痕量分析手段,但在复杂混合样品的分析中却受到不同程度的限制。1971年Lloyd提出了同步激发的想法,接着Jobn,Lloyd和Dinh等分别发表了PAH类化合物同荧光光谱技术的研究报告,Dinh使用这     

耐镉菌株的分离及其对Cd2+的吸附富集

采用梯度浓度驯化的方法,筛选分离出一株能高度耐镉和富集镉的菌株,初步鉴定为假单胞菌属(Pseudomonas sp.).该菌株在含Cd2+浓度4500mg/L的液体细菌培养基中能够生存,当Cd2+浓度为100mg/L时,pH值为6～8有利于提高菌株耐镉能力.Cd2+为低浓度时菌株积累Cd2+,菌体对Cd2+浓度为100mg/L的积累率达99.1%,冻干菌体对Cd2+的吸附量为8.786mg/g干菌体;当Cd2+浓度大于909mg/L时,菌体表现出外排Cd2+现象.红外分析和电镜观察表明,菌株细胞壁在吸附Cd2+中起重要作用,67.4%的Cd2+吸附在细胞壁上.     

沉积物间隙水的几种制备方法

间隙水的制备对研究沉积和中物质的动力学非常重要。间隙水的制备方法有离心法、压榨法、渗析法、吸气引液法等，这些方法各有利弊。本文对这些方法分别进行了了综合比较。     

Stability analysis of alkaline nitrobenzene-containing wastewater by a catalyzed Fe-Cu treatment process

Iron and copper bimetallic system (catalyzed Fe-Cu process) is a promising technology for alkaline nitrobenzene-containing wastewater treatment. However, little is currently known about the changes of treatment efficiency with time going. This research investigated the long-term performance of the catalyzed Fe-Cu process to reduce nitrobenzene (NB) in alkaline wastewater. In addition, the changes of the metal surfaces morphologies and matters before and after the reaction were analyzed by scanning electron microscopy (SEM) in conjunction with energy-dispersion spectroscopy (EDS) and X-ray diffraction spectroscopy (XRD). The results showed that the surface properties of copper almost remained unchanged after weeks of operation, which spelled its strong chemical stability and resistance to poisoning. Moreover, the results indicated that there were two reasons for the treatment efficiency decreasing with time. One was the gradual iron element consumption due to corrosion. The other was iron reactivity weakened due to the precipitates accumulation on the surfaces that were mainly Fe₃O₄ and FeCO. __________ Translated from Environmental Pollution & Control, 2006, 28(10): 783–785 [译自: 环境污染与防治]     

Characterisation of Organic Matter and Carbon Cycling in Rehabilitated Lignite-rich Mine Soils

Open-cast lignite mining in the Lusatian mining district resulted in rehabilitated mine soils containing up to four organic matter types: (1) recent plant litter, (2) lignite deposited by mining activity, (3) carbonaceous ash particles deposited during amelioration of the lignite-containing parent substrate and (4) airborne carbonaceous particles deposited during contamination. The influence of lignite-derived carbon types on the organic matter development and their role in the soil carbon cycle was unknown. This paper presents the findings obtained during a six year project concerning the impact of lignite on soil organic matter composition and the biogeochemical functioning of the ecosystem. The organic matter development after rehabilitation was followed in a chronosequence of rehabilitated mine soils afforested in 1966, 1981 and 1987. A differentiation of the organic matter types and an evaluation of their role within the ecosystem was achieved by the use of ¹⁴C activity measurements, ¹³C CPMAS NMR spectroscopy and wet chemical analysis of plant litter compounds. The results showed that the amount and degree of decomposition of the recent organic matter derived from plant material of the 30 year old mine soil was similar to natural uncontaminated forest soil which suggests complete rehabilitation of the ecosystem. The decomposition and humification processes were not influenced by the presence of lignite. On the other hand it was shown that lignite, which was thought to be recalcitrant because of its chemical structure, was part of the carbon cycle in these soils. This demonstrates the need to elucidate further the stabilisation mechanisms of organic matter in soils.     

Effect of Cross-Linking Waste Protein with Dialdehydes on Its Biodegradation Under Anaerobic Conditions

Most native polymers used in processing and application technologies are admittedly disposable from the environment in a biologic manner, but products possess low mechanical strength. One of the paths to increasing this attribute (if feasible) is their cross-linking, which may, however, affect their readiness to biodegradation. In the presented work this condition was observed on the example of waste protein (Hykol B) cross-linking by means of glutardialdehyde and glyoxal. Degree and course of cross-linking were determined through impedance spectroscopy. The objective of this work also was to obtain data for constructing a sensor capable of following the cross-linking course in real time, for potential industrial application of Hykol in continuous production. Impedance spectroscopy proved to be applicable even to this kind of material marked by considerable water content and exhibiting relatively high electric conductivity; so far it had been used only for materials of low conductivity. An aqueous environment inoculated with digested anaerobic sludge from a municipal wastewater treatment plant was selected for modeling anaerobic conditions. The relation was studied between cross-linking degree given by content of cross-linking agent (determined by impedance spectroscopy) and biodegradation degree under anaerobic conditions. It was confirmed that network density as given by quantity of added agent not only reduced breakdown degree but also slowed the course of the process. This fact is particularly obvious with cross-linking by means of glyoxal; network density is thus dependent on type of employed substance, which affect type and structure of created network. That not merely forms an obstacle during polymer swelling and dissolution but also prevents access of bacteria to source of metabolized organic carbon.     

State of research on the automation of HAZOP studies

For more than 30 years, multiple research groups have worked on the automation of hazard and operability (HAZOP) studies, or more specifically on the hazard identification process. So far, very few of these approaches have been used in the chemical process industry. Automatic hazard identification is a knowledge-intensive process that demands high standards with regard to the way in which knowledge is stored and made available. There are various suitable approaches to the qualitative modeling of processes and plants, which are the foundation for reasoning systems that are used for the identification of hazards. Additionally, there are quantitative methods that are based on process simulations and can be used to identify potential hazards. The investigation of the state of research demonstrates that there are sophisticated technologies for automated systems that include powerful reasoning techniques. The benefits and shortcomings of existing technologies are discussed with regard to their industrial applicability. Often, the quality of the necessary specific and generic knowledge is not sufficient to detect potential hazardous events and operational malfunctions. Computer-aided HAZOP systems should be integrated with computer-aided design- or process simulation software using common data models based on the digital representation of the process plant. In order to be used by HAZOP practitioners automated systems need to be comprehensive, serve as specialized decision support systems, and be tested and evaluated using round robin tests.     

长期施肥下浙江稻田不同颗粒组分有机碳的稳定特征

依托浙江水网地区稻田长期定位施肥试验(1996~2013年),利用固态13C核磁共振波谱技术,研究长期不同施肥措施下土壤各颗粒组分有机碳含量及其化学结构特征.结果表明,与不施肥对照(CK)相比,秸秆与化肥配施(NPKRS)、栏肥与化肥配施(NPKOM)、单施化肥(NPK)和单施栏肥(OM)处理均显著(P0.05)增加了砂粒(2~0.02 mm)、粉粒(0.02~0.002mm)和黏粒(0.002 mm)组分中有机碳含量;而单施秸秆(RS)处理仅显著增加砂粒组分有机碳含量.此外,与单施化肥处理相比,有机肥和化肥配施促进了新增有机碳在粉粒和黏粒组分的分配,更有利于新增有机碳的稳定.应用13C-NMR波谱技术进行结构表征,结果表明粉粒和黏粒组分有机碳的化学结构存在明显差异,粉粒组分烷氧碳、芳香碳的相对含量高于黏粒,而烷基碳、羰基碳的相对含量低于黏粒.长期有机肥与化肥配施下粉粒和黏粒烷基碳相对含量较单施有机肥处理分别降低9.1%~11.9%和13.7%~19.9%,烷氧碳的相对含量则分别增加2.9%~6.3%和13.4%~22.1%,表明有机肥与化肥配施处理降低了粉粒和黏粒组分有机碳的分解程度.长期单施化肥处理下粉粒和黏粒组分有机质的芳化度和疏水性低于单施有机肥处理和不施肥处理,有机质的矿化稳定性较低.长期有机肥与化肥配施,尤其是NPKOM处理,通过增加化学抗性化合物和碳水化合物的积累,并且减缓活性组分的分解提高粉粒和黏粒组分有机碳含量,是促进稻田土壤有机碳可持续积累的有效措施.     

Effect of oxide nanoparticles on the morphology and fluidity of phospholipid membranes and the role of hydrogen bonds

Engineered oxide nanoparticles (NPs) are widely applied in insulators, catalyzers, paints, cosmetic products, textiles and semiconductors. Their attachment on cell membrane may lead to cytotoxicity. The effects of Al₂O₃, Fe₂O₃, SiO₂, TiO₂ and ZnO NPs on membrane integrity and fluidity were studied using giant or small unilamellar vesicles in this study. Al₂O₃ and SiO₂ NPs disrupted the oppositely charged membrane, indicating the important role of electrostatic attraction. However, Fe₂O₃, TiO₂ and ZnO NPs did not cause serious membrane disruption as Al₂O₃ and SiO₂ NPs. Membrane fluidity was evaluated by the generalized polarity (GP) values of Laurdan fluorescent emission. SiO₂ NPs induce the membrane gelation of both positively and negatively charged membrane. Al₂O₃ and ZnO NPs induced the gelation of the oppositely charged membrane, but did not cause obvious membrane gelation to the like charged membrane. The phospholipid molecular structural changes after NP exposure were analyzed by Fourier transform infrared (FT-IR) spectroscopy. FT-IR spectra revealed the hydrogen bond formation between NPs and the carbonyl/phosphate groups of phospholipids. Al₂O₃ and SiO₂ NPs showed strongest evidence of hydrogen bonding on their FT-IR spectra. It was consistent with the microscopic observation and fluorescent data that Al₂O₃ and SiO₂ NPs caused more serious membrane disruption and gelation. This study on membrane damage provides further knowledge on the cytotoxicity of nanomaterials and the safety of NP application.     

覆盖金属氧化物对湖泊沉积物溶解性有机质特征的影响

为揭示不同金属氧化物对湖泊沉积物DOM（溶解性有机质）影响机制,通过室内模拟试验,在沉积物表层分别覆盖Fe、Al、Mn氧化物及湖沙后培养1 a,并利用三维荧光和紫外光谱方法进行表征.结果表明:① 覆盖Al、Fe、Mn氧化物和湖沙主要降低了0~3 cm沉积物的w（DOC）,降幅分别为8.61%、6.27%、22.38%和0.44%. ② 沉积物中DOM的类络氨酸峰（peak B₁）和类色氨酸峰（peak T₂）均产生较大变化.其中三种氧化物均显著降低了上层沉积物中DOM的peak T₂,使底层DOM的peakT₂显著增加. Mn氧化物使DOM的peak B₁降低,Fe和Al氧化物使DOM的peak B₁增加,湖沙则使两类峰均降低. ③ 覆盖金属氧化物改变了沉积物DOM结构特征,其中覆盖Fe氧化物增强了其芳香性,而覆盖Mn氧化物和Al氧化却降低其芳香性,但三者均使DOM腐质化程度及官能团数量增加,并使FI（Fluorescence Index,荧光指数）增大,表明DOM向生物源转化.研究显示,沉积物表层覆盖金属氧化物影响了沉积物中DOM迁移和转化,并促进了其降解,导致其分子量和腐殖化程度增加.