柴外光催化氧化-分光光度法测定水体中的总磷

光催化氧化技术是一种新兴的样品预处理技术,探究新型的光催化氧化消解方法对样品前处理有着显著的优势。本文拟采用二氧化钛为催化剂,通过使用光催化氧化消解方法对水体样品进行前处理,再用分光光度法测定水中的总磷,并与常用消解方法进行对比,确定本方法的准确度与精密度。     

Abiotic oxidation of 17β-estradiol by soil manganese oxides

The degradation of 17β-estradiol (E2) in sterile soil and Mn-free soil slurries was determined. In 0.075 g ml⁻¹ soil slurry, E2 with an initial concentration of 0.0267 μmol g⁻¹ was rapidly degraded and near equimolar estrone (E1) accumulated. A mass balance involving E2 and E1 existed throughout the reaction. The E2 degradation was thus an oxidation process and E1 was the only product. The concurrent release of Mn(II) during E2 oxidation and a lack of E2 oxidation in Mn-free soil slurry together demonstrated that soil manganese oxides were responsible for E2 oxidation. The degree of E2 oxidation was higher at high pH than at low pH, consistent with the fact that the reaction released protons. This study suggests that manganese oxides may be used as soil amendments to effectively oxidize E2 to less potent E1 in soil.     

Oxidation of a PAH polluted soil using modified Fenton reaction in unsaturated condition affects biological and physico-chemical properties

A batch experiment was conducted to assess the impact of chemical oxidation using modified Fenton reaction on PAH content and on physico-chemical and biological parameters of an industrial PAH contaminated soil in unsaturated condition. Two levels of oxidant (H₂O₂, 6 and 65 g kg⁻¹) and FeSO₄ were applied. Agronomic parameters, bacterial and fungal density, microbial activity, seed germination and ryegrass growth were assessed. Partial removal of PAHs (14% and 22%) was obtained with the addition of oxidant. The impact of chemical oxidation on PAH removal and soil physico-chemical and biological parameters differed depending on the level of reagent. The treatment with the highest concentration of oxidant decreased soil pH, cation exchange capacity and extractable phosphorus content. Bacterial, fungal, and PAH degrading bacteria densities were also lower in oxidized soil. However a rebound of microbial populations and an increased microbial activity in oxidized soil were measured after 5 weeks of incubation. Plant growth on soil treated by the highest level of oxidant was negatively affected.     

Pyrrolidinium Imides: Promising Ionic Liquids for Direct Capture of Elemental Mercury from Flue Gas

A new approach to vapor phase elemental mercury capture has been explored; this approach exploits an ionic liquid coating layer to oxidize elemental mercury for subsequent immobilization by chelating ligands. The room temperature ionic liquid 1-butyl-1-methyl pyrrolidinium bis(trifluoromethane sulfonyl)imide (P₁₄) was selected for study based on its oxidation potential window, thermal stability, and low vapor pressure. Tests were also completed in which KMnO₄ was added to P₁₄ to form a new ionic liquid, P₁₄–KMnO₄, with a higher oxidation potential. In room-temperature bulk liquid phase capture experiments, 59% of the elemental mercury in the inlet gas was captured using P₁₄ alone; mercury capture using P₁₄–KMnO₄ was quantitative. P₁₄ and P₁₄–KMnO₄ coatings were successfully applied to mesoporous silica substrates and to silica substrates functionalized with mercury chelating ligands. The coating layers were found to be thermally stable up to 300°C. Fixed-bed tests of nonfunctionalized silica coated with P₁₄ showed an elemental mercury uptake of 2.7 mg/g adsorbent at 160°C; at the same temperature, functionalized silica coated with P₁₄–KMnO₄ showed an elemental mercury capacity of at least 7.2 mg/g adsorbent, several times higher than that of activated carbon. The empty bed gas residence time in these tests was 0.04 s. A chelating adsorbent incorporating P₁₄ in the coating layer, may be capable of simultaneous removal of elemental and oxidized mercury from coal combustion flue gases.     

无人监测船在城市内河水质监测中的应用

采用无人船监测技术结合镇江市内河水质状况普查工作,大于120 h的航行试验,总航行里程约为90 km,对建成区水体中的氨氮(NH3-N)、溶解氧(DO)、氧化还原电位(ORP)和浊度进行原位监测,结果表明,通过合理选择搭载相应的测量电极,无人监测船能够满足地表水测量数据准确度的要求,同时可实现研究区域的监测全覆盖,提升了地表水环境监测的工作效率。     

Application of Fe(VI) in abating contaminants in water: State of art and knowledge gaps

• The properties of Fe(VI) were summarized. • Both the superiorities and the limitations of Fe(VI) technologies were discussed. • Methods to improve contaminants oxidation/disinfection by Fe(VI) were introduced. • Future research needs for the development of Fe(VI) technologies were proposed. The past two decades have witnessed the rapid development and wide application of Fe(VI) in the field of water de-contamination because of its environmentally benign character. Fe(VI) has been mainly applied as a highly efficient oxidant/disinfectant for the selective elimination of contaminants. The in situ generated iron(III) (hydr)oxides with the function of adsorption/coagulation can further increase the removal of contaminants by Fe(VI) in some cases. Because of the limitations of Fe(VI) per se, various modified methods have been developed to improve the performance of Fe(VI) oxidation technology. Based on the published literature, this paper summarized the current views on the intrinsic properties of Fe(VI) with the emphasis on the self-decay mechanism of Fe(VI). The applications of Fe(VI) as a sole oxidant for decomposing organic contaminants rich in electron-donating moieties, as a bi-functional reagent (both oxidant and coagulant) for eliminating some special contaminants, and as a disinfectant for inactivating microorganisms were systematically summarized. Moreover, the difficulties in synthesizing and preserving Fe(VI), which limits the large-scale application of Fe(VI), and the potential formation of toxic byproducts during Fe(VI) application were presented. This paper also systematically reviewed the important nodes in developing methods to improve the performance of Fe(VI) as oxidant or disinfectant in the past two decades, and proposed the future research needs for the development of Fe(VI) technologies.     

Zero-valent manganese nanoparticles coupled with different strong oxidants for thallium removal from wastewater

• Nano zero-valent manganese (nZVMn, Mn⁰) is synthesized via borohydrides reduction. • Mn⁰ combined with persulfate/hypochlorite is effective for Tl removal at pH 6-12. • Mn⁰ can activate persulfate to form hydroxyl and sulfate radicals. • Oxidation-induced precipitation and surface complexation contribute to Tl removal. • Combined Mn⁰-oxidants process is promising in the environmental field. Nano zero-valent manganese (nZVMn, Mn⁰) was prepared through a borohydride reduction method and coupled with different oxidants (persulfate (S₂O₈²⁻), hypochlorite (ClO⁻), or hydrogen peroxide (H₂O₂)) to remove thallium (Tl) from wastewater. The surface of Mn⁰ was readily oxidized to form a core-shell composite (MnO_x@Mn⁰), which consists of Mn⁰ as the inner core and MnO_x (MnO, Mn₂O₃, and Mn₃O₄) as the outer layer. When Mn⁰ was added alone, effective Tl(I) removal was achieved at high pH levels (>12). The Mn⁰-H₂O₂ system was only effective in Tl(I) removal at high pH (>12), while the Mn⁰-S₂O₈²⁻ or Mn⁰-ClO⁻ system had excellent Tl(I) removal (>96%) over a broad pH range (4–12). The Mn⁰-S₂O₈²⁻ oxidation system provided the best resistance to interference from an external organic matrix. The isotherm of Tl(I) removal through the Mn⁰-S₂O₈²⁻ system followed the Freundlich model. The Mn⁰ nanomaterials can activate persulfate to produce sulfate radicals and hydroxyl radicals. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy suggested that oxidation-induced precipitation, surface adsorption, and electrostatic attraction are the main mechanisms for Tl(I) removal resulting from the combination of Mn⁰ and oxidants. Mn⁰ coupled with S₂O₈²⁻/ClO⁻ is a novel and effective technique for Tl(I) removal, and its application in other fields is worthy of further investigation.     

A critical review on the technique and mechanism of microwave-based denitrification in flue gas

Microwave radiation has received extensive attention due to its significant thermal and non-thermal effects, and the development of MW-based denitrification in flue gas has become one of the most promising methods to avoid the defects of ammonia escape, high temperature and cost in traditional SCR. This review introduces the thermal and non-thermal effects of microwaves and divides MW-based denitrification methods into MW reduction and oxidation denitrification, systematically summarizes these denitrification methods, including MW discharge reduction, MW-induced catalytic reduction using active carbon, molecular sieves, metal oxides (transition metals, perovskites, etc.), MW-induced oxidation denitrification with and without additional oxidant, and discusses their removal pathway and mechanism. Finally, several research prospects and directions regarding the development of microwave-based denitrification methods are provided.