蒽降解菌与铜绿假单胞菌融合子的特性研究

将蒽降解菌An815和绿色荧光蛋白标记铜绿假单胞菌(Pseudomonas aeruginosa/EGFP)P原生质体融合,得到了既能高效降解蒽,又能产生生物表面活性剂的融合子F。研究了它的形态特征、生理生化特性、产表面活性剂的能力、对蒽的降解性能及生长繁殖情况。结果表明,融合子菌落和菌体形态,产脓青素,荧光色素的特性类似于铜绿假单胞菌亲本,但其大多生理生化特性酷似An815亲本而不同于铜绿假单胞菌亲本;融合子有较好产表面活性剂的能力,72 h内将表面张力由70.2 mN/m降至36.5mN/m;在蒽的反应体系中,32h内融合子和亲本An815对蒽的降解转化率分别为86.7%,59.4%,融合子对蒽的降解速率比An815提高了27.3%;在蒽的反应体系中融合子和亲本生长曲线相似。     

PAHs Contamination in Bank Sediment of the Yamuna River, Delhi, India

This study was performed to elucidate the distribution, concentration trend and possible sources of PAHs in bank sediment of river Yamuna in Delhi, India. The levels of 16 priority polycyclic aromatic hydrocarbons (PAHs) were analyzed during pre-monsoon, monsoon and post-monsoon seasons in the sediment fraction < 53 μm. Reference standards and internal standards were used for identification and quantification of PAHs by HPLC. The sum of 16 PAH compounds ranged from 4.50 to 23.53 μg/g with a mean concentration of 10.15 ± 4.32 μg/g (dry wt.). Among 5 sites studied, the site, Income Tax Office (ITO) was found to be the hotspot attaining highest concentration. Predominance of 2–4 ring PAHs suggests a relatively recent local sources of PAHs in the study area. Moreover, molecular indices based source apportionment also illustrates pyrogenic source fingerprint of PAHs. No significant temporal trend was observed.     

Polycyclic aromatic hydrocarbons in cigarette sidestream smoke particulates from a Taiwanese brand and their carcinogenic relevance

Polycyclic aromatic hydrocarbons (PAHs) adsorbed on cigarette sidestream smoke particulates (CSSPs) have been regarded as important contributors to lung carcinogenesis in never smokers. However, limited information is available on PAH levels in cigarette sidestream smoke. Here we determine the concentrations of 22 PAHs, including 16 US EPA priority PAHs, in CSSPs generated from a high market-share domestic brand in Taiwan. Five of the 22 PAHs are undetectable. The remaining 17 PAHs constitute about 0.022% of the total mass of CSSPs. Near one fifth of the PAH mass come from IARC group 1 and group 2 carcinogens. Carcinogenic potency is equivalent to 144 ng benzo[a]pyrene per cigarette converted according to potency equivalency factors (PEFs). The CSSP condensate could activate AhR activity and induce AhR target gene expression. High concentrations of CSSPs also exhibited AhR-independent cytotoxicity. However, mixing the 17 PAHs as the composition in the CSSP condensate could not reconstitute either capacity. Since AhR activation and cytotoxicity are important mechanisms underlying carcinogenic potency, the results suggest that other component compounds play a more active role in carcinogenesis. The approach of individual PAH profiling plus PEF conversion commonly used in risk assessment is likely to underestimate the risk caused by environmental cigarette smoke exposure.     

Environmental assessment of garden waste management in the Municipality of Aarhus, Denmark

An environmental assessment of six scenarios for handling of garden waste in the Municipality of Aarhus (Denmark) was performed from a life cycle perspective by means of the LCA-model EASEWASTE. In the first (baseline) scenario, the current garden waste management system based on windrow composting was assessed, while in the other five scenarios alternative solutions including incineration and home composting of fractions of the garden waste were evaluated. The environmental profile (normalised to Person Equivalent, PE) of the current garden waste management in Aarhus is in the order of −6 to 8 mPE Mg⁻¹ ww for the non-toxic categories and up to 100 mPE Mg⁻¹ ww for the toxic categories. The potential impacts on non-toxic categories are much smaller than what is found for other fractions of municipal solid waste. Incineration (up to 35% of the garden waste) and home composting (up to 18% of the garden waste) seem from an environmental point of view suitable for diverting waste away from the composting facility in order to increase its capacity. In particular the incineration of woody parts of the garden waste improved the environmental profile of the garden waste management significantly.     

Cation exchange in a glacial till drumlin at a road salt storage facility

At a former wood preservation plant severely contaminated with coal tar oil, in situ bulk attenuation and biodegradation rate constants for several monoaromatic (BTEX) and polyaromatic hydrocarbons (PAH) were determined using (1) classical first order decay models, (2) Michaelis–Menten degradation kinetics (MM), and (3) stable carbon isotopes, for o-xylene and naphthalene. The first order bulk attenuation rate constant for o-xylene was calculated to be 0.0025 d^− 1 and a novel stable isotope-based first order model, which also accounted for the respective redox conditions, resulted in a slightly smaller biodegradation rate constant of 0.0019 d^− 1. Based on MM-kinetics, the o-xylene concentration decreased with a maximum rate of k_max = 0.1 µg/L/d. The bulk attenuation rate constant of naphthalene retrieved from the classical first order decay model was 0.0038 d^− 1. The stable isotope-based biodegradation rate constant of 0.0027 d^− 1 was smaller in the reduced zone, while residual naphthalene in the oxic part of the plume further downgradient was degraded at a higher rate of 0.0038 d^− 1. With MM-kinetics a maximum degradation rate of k_max = 12 µg/L/d was determined. Although best fits were obtained by MM-kinetics, we consider the carbon stable isotope-based approach more appropriate as it is specific for biodegradation (not overall attenuation) and at the same time accounts for the dominant electron-accepting process. For o-xylene a field based isotope enrichment factor ε_field of − 1.4 could be determined using the Rayleigh model, which closely matched values from laboratory studies of o-xylene degradation under sulfate-reducing conditions.     

Urinary 8-oxo-7, 8-dihydro-2′-deoxyguanosine concentrations after frying of bacon,a pilot study

Cooking fumes contain compounds that may give rise to oxidative stress and mutations when inhaled. The aim of this study was to evaluate if cooking fumes from frying of bacon induce oxidative stress by measurement of urinary 8-oxo-7,8-dihydro-2 deoxyguanosine, a marker of oxidatively damaged DNA. Three non-smoking women fried bacon for 3 h. Urine samples were taken as early morning void at the same time on four days; the morning before frying, the morning after first frying, the morning after three days of frying and one week after first urine sample. 8-Oxo-7,8-dihydro-2 deoxyguanosine, 1-hydroxypyrene and 2-hydroxyphenanthrene, metabolites of polycyclic aromatic hydrocarbons, were measured by liquid chromatography-mass spectrometry/mass spectrometry (LC-MS/MS). 8-Oxo-7,8-dihydro-2 deoxyguanosine correlated weakly with concentrations of 1-hydroxypyrene (r = 0.31, p = 0.042), but it did not correlate with 2-hydroxyphenanthrene (r = ?0.074; p = 0.64). Average urinary 8-oxo-7,8-dihydro-2 deoxyguanosine concentrations increased from the day before frying (16.3 ± 4.2 nmol/L) to the third day of frying (26.2 ± 10.2 nmol/L), although not statistically significantly. Our pilot study shows that frying of bacon may result in increased oxidative stress which further emphasises the possible carcinogenic potential of cooking fumes.     

Oil Identification Based on a Goodness-of-Fit Metric Applied to Hydrocarbon Analysis Results

Assessment of environmental damage following accidental oil spills requires reliable oil identification methods. Results from hydrocarbon analyses of environmental samples are often difficult to interpret, because of the changes in oil composition (or weathering) that follows release into the environment, and because of confounding by hydrocarbons from other sources. To a first-order approximation, weathering proceeds according to simple first-order loss-rate (FOLR) kinetics for polycyclic aromatic hydrocarbons (PAH) based on molecular size. This relationship between relative weathering rate and molecular size can be exploited to infer the initial PAH composition of spilled oils, and this information can be combined with results for weathering-invariant analytes to substantially increase the precision and accuracy of hydrocarbon source recognition methods. The approach presented here evaluates a goodness-of-fit metric between the measured hydrocarbon composition of an environmental sample and a suspected source, after correcting for PAR weathering losses based on FOLR kinetics. Variability from analytical and sampling error may thus be accounted for, and source identifications can be expressed as objective probability statements. This approach is illustrated by application to four independent case studies.     

The structure of the fire fighting foam surfactant Forafac®1157 and its biological and photolytic transformation products

For several decades, perfluorooctane sulfonate (PFOS) has widely been used as a fluorinated surfactant in aqueous film forming foams used as hydrocarbon fuel fire extinguishers. Due to concerns regarding its environmental persistence and toxicological effects, PFOS has recently been replaced by novel fluorinated surfactants such as Forafac®1157, developed by the DuPont company. The major component of Forafac®1157 is a 6:2 fluorotelomer sulfonamide alkylbetaine (6:2 FTAB), and a link between the trade name and the exact chemical structure is presented here to the scientific community for the first time. In the present work, the structure of the 6:2 FTAB was elucidated by ¹H, ¹³C and ¹⁹F nuclear magnetic resonance spectroscopy and high-resolution mass spectrometry. Moreover, its major metabolites from blue mussel (Mytilus edulis) and turbot (Scophthalmus maximus) and its photolytic transformation products were identified. Contrary to what has earlier been observed for PFOS, the 6:2 FTAB was extensively metabolized by blue mussel and turbot exposed to Forafac®1157. The major metabolite was a deacetylated betaine species, from which mono- and di-demethylated metabolites also were formed. Another abundant metabolite was the 6:2 fluorotelomer sulfonamide. In another experiment, Forafac®1157 was subjected to UV-light induced photolysis. The experimental conditions aimed to simulate Arctic conditions and the deacetylated species was again the primary transformation product of 6:2 FTAB. A 6:2 fluorotelomer sulfonamide was also formed along with a non-identified transformation product. The environmental presence of most of the metabolites and transformation products was qualitatively demonstrated by analysis of soil samples taken in close proximity to an airport fire training facility.     

The use of physiological characteristics for comparison of organic compounds phytotoxicity

The influence of intact (FLT) and photomodified (phFLT) fluoranthene (0.05, 0.5 and 5 μmol l⁻¹) and herbicide Basagran (5, 20, 35 and 50 nmol l⁻¹) on the germination, growth of seedlings and photosynthetic processes in pea plants (Pisum sativum L., cv. Garde) was investigated. The germination was significantly inhibited already by the lowest concentration (0.05 μmol l⁻¹) of FLT and phFLT, while Basagran caused inhibition only in higher concentrations (35 and 50 nmol l⁻¹). The growth of roots was significantly inhibited by higher concentration 5 μmol l⁻¹ of both FLT and phFLT and the shoot of seedlings was significantly influenced only by photomodified form. The length of root and shoot was inhibited already by concentration 5 nmol l⁻¹ of Basagran. Organic compounds applied on chloroplasts suspension influenced primary photochemical processes of photosynthesis. In chlorophyll fluorescence parameters, the significant increase of F₀ values and the decrease of F_V/F_M and Φ_II values by application of FLT (0.5 and 5 μmol l⁻¹) and phFLT (0.05, 0.5 and 5 μmol l⁻¹) was recorded. The maximum capacity of PSII (F_V/F_M) was influenced by the highest (50 nmol l⁻¹) and the effective quantum yield of PSII (Φ_II) already by the lowest (5 nmol l⁻¹) concentration of Basagran. Hill reaction activity decreased and was significantly inhibited by higher concentration (0.5 and 5 μmol l⁻¹) of FLT and phFLT and already by the lowest concentration (5 nmol l⁻¹) of Basagran.     

Sorption of native polyaromatic hydrocarbons (PAH) to black carbon and amended activated carbon in soil

Organic pollutants (e.g. polyaromatic hydrocarbons (PAH)) strongly sorb to carbonaceous sorbents such as black carbon and activated carbon (BC and AC, respectively). For a creosote-contaminated soil (Sigma15PAH 5500 mg kg(dry weight(dw))(-1)) and an urban soil with moderate PAH content (Sigma15PAH 38 mg kg(dw)(-1)), total organic carbon-water distribution coefficients (K(TOC)) were up to a factor of 100 above values for amorphous (humic) organic carbon obtained by a frequently used Linear-Free-Energy Relationship. This increase could be explained by inclusion of BC (urban soil) or oil (creosote-contaminated soil) into the sorption model. AC is a manufactured sorbent for organic pollutants with similar strong sorption properties as the combustion by-product BC. AC has the potential to be used for in situ remediation of contaminated soils and sediments. The addition of small amounts of powdered AC (2%) to the moderately contaminated urban soil reduced the freely dissolved aqueous concentration of native PAH in soil/water suspensions up to 99%. For granulated AC amended to the urban soil, the reduction in freely dissolved concentrations was not as strong (median 64%), especially for the heavier PAH. This is probably due to blockage of the pore system of granulated AC resulting in AC deactivation by soil components. For powdered and granulated AC amended to the heavily contaminated creosote soil, median reductions were 63% and 4%, respectively, probably due to saturation of AC sorption sites by the high PAH concentrations and/or blockage of sorption sites and pores by oil.