硝基多环芳烃的致突变性与理化参数之间的定量结构活性关系

硝基多环芳烃因具有直接致突变性、潜在致癌性以及在环境中的广泛存在而引起人们的关注。本文在硝基多环芳烃的致突变活性与理化参数（正辛醇－水分配系数、水溶解度、分子连接性指数）之间建立了１０个定量结构活性关系式。并利用溶解度与致突变性之间的结构活性关系对５０种硝基多环芳烃的致突变能力进行预测，正确率达７８％。     

公路立交景观设计研究

对立交景观设计的内容、原则、立交的规划布局与总体造型、立交线形景观设计、立交桥跨景观设计进行了论述。     

Impact of improving vehicle front design on the burden of pedestrian injuries in Germany,the United States,and India

Objective: European car design regulations and New Car Assessment Program (NCAP) ratings have led to reductions in pedestrian injuries. The aim of this study was to evaluate the impact of improving vehicle front design on mortality and morbidity due to pedestrian injuries in a European country (Germany) and 2 countries (the United States and India) that do not have pedestrian-focused NCAP testing or design regulations.

Methods: We used data from the International Road Traffic and Accident Database and the Global Burden of Disease project to estimate baseline pedestrian deaths and nonfatal injuries in each country in 2013. The effect of improved passenger car star ratings on probability of pedestrian injury was based on recent evaluations of pedestrian crash data from Germany. The effect of improved heavy motor vehicle (HMV) front end design on pedestrian injuries was based on estimates reported by simulation studies. We used burden of disease methods to estimate population health loss by combining the burden of morbidity and mortality in disability-adjusted life years (DALYs) lost.

Results: Extrapolating from evaluations in Germany suggests that improving front end design of cars can potentially reduce the burden of pedestrian injuries due to cars by up to 24% in the United States and 41% in India. In Germany, where cars comply with the United Nations regulation on pedestrian safety, additional improvements would have led to a 1% reduction. Similarly, improved HMV design would reduce DALYs lost by pedestrian victims hit by HMVs by 20% in each country. Overall, improved vehicle design would reduce DALYs lost to road traffic injuries (RTIs) by 0.8% in Germany, 4.1% in the United States, and 6.7% in India.

Conclusions: Recent evaluations show a strong correlation between Euro NCAP pedestrian scores and real-life pedestrian injuries, suggesting that improved car front end design in Europe has led to substantial reductions in pedestrian injuries. Although the United States has fewer pedestrian crashes, it would nevertheless benefit substantially by adopting similar regulations and instituting pedestrian NCAP testing. The maximum benefit would be realized in low- and middle-income countries like India that have a high proportion of pedestrian crashes. Though crash avoidance technologies are being developed to protect pedestrians, supplemental protection through design regulations may significantly improve injury countermeasures for vulnerable road users.     

飞机典型液压管路系统减振优化计算方法研究

目的研究管道走向和卡箍位置对管道应力的影响。方法以飞机典型液压管路系统为优化对象,对管路系统及支持结构进行动力学参数化建模,使用MATLAB和MSC.NASTRAN构筑基于遗传算法的自动减振优化计算平台,以管壁结构和飞机支持结构的动态应力响应最小为优化目标,对管路走向(包括拐折位置、曲率半径)、卡箍位置进行优化计算,从而建立一种飞机管路系统设计中的自动减振优化计算方法。结果使用建立的减振优化计算平台优化计算设计后,飞机典型液压管路系统最大动态应力值降低了50%。结论提供的优化方法能够有效地通过优化管道布置参数降低应力水平。     

生物膜法光发酵制氢的研究现状与展望

21世纪被誉为氢能世纪.光发酵制氢作为绿色可持续生物制氢方式的一种,可以利用独特的光合系统固定太阳能,并利用有机物产生清洁能源氢气,因而受到广泛关注.但光发酵细菌凝集力差、底物转化效率和光能利用率低导致产氢效能下降,从而阻碍了光发酵制氢的发展.光发酵细菌可以通过形成生物膜而被有效固定,进而增加反应器内光发酵细菌的生物持有量,提高光发酵细菌对不利环境的抵抗力;同时,光发酵细菌形成生物膜后可以调控产氢细菌新陈代谢和生理活性使其更利于产氢.其中,光发酵生物膜反应器的设计尤为重要,尤其是反应器内光源的均匀分配对于光发酵制氢是一项关键因素,需要对光源设计、空间摆放和遮光性进行综合分析和设计;其次,需要考虑载体性质和载体安装以充分吸附光发酵细菌并形成生物膜;同时,结合未来可持续绿色发展的需求,光发酵生物膜反应器设计需要逐步过渡到以室外环境作为常规环境和太阳作为光源.尽管光发酵生物膜制氢前景良好,但目前对于光发酵生物膜反应器和制氢机制的研究仍然不够充分,需要更加深入地探索和优化以突破光发酵制氢的瓶颈,推动氢能行业的发展.     

某机载设备隔振安装设计分析与试验研究

目的提高机载设备典型U型谱环境下的抗振性能。方法采用数值法分析典型U型谱的隔振响应分析,确定隔振系统参数,设计隔振系统的刚度和阻尼,最后通过试验验证隔振器的性能及使用寿命。结果通过分析确定了给定典型U型谱的隔振设计最佳固有频率段为70~130 Hz,完成了某机载设备用隔振器的载荷计算,刚度和阻尼设计,并用试验验证了隔振器的性能及耐久性能。结论所设计的隔振系统满足该机载设备隔振安装的性能和振动耐久性要求,有效地提高了机载设备在U型振动谱环境下的抗振性能。     

Reorienting job crafting research: A hierarchical structure of job crafting concepts and integrative review

Two dominant perspectives of job crafting—the original theory from Wrzesniewski and Dutton ( 2001 ) and the job demands resources perspective from Tims, Bakker, and Derks ( 2012 )—remain separate in research. To synthesize these perspectives, we propose a three‐level hierarchical structure of job crafting, and we identify the aggregate/superordinate nature of each major job crafting construct. The first level of the structure is job crafting orientation, or approach versus avoidance crafting, which we argue is an essential yet often neglected distinction in the literature. We address the debate surrounding cognitive crafting and identify crafting form (behavioral versus cognitive crafting) as the next hierarchical level of constructs. Finally, we concur that job resources and job demands, or crafting content, capture different ways that individuals craft their jobs. Using this integrated hierarchical structure, we were able to review antecedents and outcomes from both perspectives. We show, for example, that approach crafting in its behavioral form is very similar to other proactive behaviors in the way it functions, suggesting a need for closer synthesis with the broader proactive literature, whereas avoidance crafting appears to be less proactive and often dysfunctional. On the basis of our review, we develop a road map for future research.     

基于钻孔数据煤矿开采地表沉陷预计

开采沉陷引起的环境损害评价是环评工作中的重要内容,现有预计软件基本不适应在大面积环评工作中开展沉陷预计工作。针对现有问题,以矿区钻孔数据为基础,基于Delaunay三角形剖分算法建立了煤层开采地表沉陷预计模型。通过设计对比试验,验证了新建模型预计结果较传统的预计方法更加符合实际地表沉陷情况,预计结果的可靠性较高。将该模型运用到工程实例中,可以节省人力资源,使煤矿生态环评从原来以定性分析、半定量预计为主的状况,提高到以定量预测为主的高度,更好地为矿区生态环境保服务。     

FMEA and consideration of real work situations for safer design of production systems

Production equipment designers must ensure the health and safety of future users; in this regard, they augment requirements for standardizing and controlling operator work. This contrasts with the ergonomic view of the activity, which recommends leaving operators leeway (margins for manoeuvre) in performing their task, while safeguarding their health. Following a brief analysis of design practices in the car industry, we detail how the Failure Modes and Effects Analysis (FMEA) approach is implemented in this sector. We then suggest an adaptation that enables designers to consider real work situations. This new protocol, namely, work situation FMEA, allows experience feedback to be used to defend the health standpoint during designer project reviews, which usually only address quality and performance issues. We subsequently illustrate the advantage of this approach using two examples of work situations at car parts manufacturers: the first from the literature and the second from an in-company industrial project.     

华北稻田灌溉水多级表面流强化人工湿地工程系统设计研究

以河北曹妃甸水稻田为研究对象,分析测定灌溉水样中SS、COD和氨氮的含量并依据有关国家标准确定其污染程度。根据当地农业生产条件、工程地质与农田环境特点及不同治理方案的经济技术可行性,选用由工程保障和植物生态系统构成的多级表面流强化人工湿地系统修复灌溉水有机污染,并对其修复效果进行量化评价。结果表明:研究区内稻田灌溉水SS、COD、NH3-N 3种污染物的浓度削减率依次为76.17%、60.02%、55.08%,出水达到农田灌溉水质标准和地表水Ⅴ类水质要求。人工湿地系统的建立不仅改善灌溉水水质,保证农产品质量,还有效恢复了湿地的生态功能,实现环境与经济效益的统一。