人工挖孔灌注桩配合砼静压桩的应用

以深圳市金属制品总厂拉丝热处理车间的基础工程为实例，介绍了运用人工挖孔灌注桩配合砼静压桩，处理地下水管中的方法，分析了在软弱地基中运用该方法的具体特点。     

合理规划城区绿地构建景观安全格局 --以吴家山城区绿地规划为例

运用城市生态规划的原理及方法,对吴家山城区绿地进行了规划。包括城市的组团式规划、控制性组分规划、非控制性组分规划、生态平衡构架规划四部分。通过规划,实现吴家山生态城市景观结构和功能的匹配及能流、物流的畅通,使绿地系统上升成为城市生态环境质量的调控系统来建设。     

汶川地震后绵竹、都江堰市房屋震害调查与分析

依据笔者在四川省绵竹市、都江堰市参加建设部组织的汶川地震震后房屋应急评估所取得的资料,对该次地震造成的建筑结构破坏进行了分析,从砖砌体结构、混凝土框架结构、构造问题以及设计与施工缺陷4个方面,论述了各种破坏的形态与成因,讨论了现行设计方法中存在的问题,提出了相应的改进建议。主要结论有:砌体结构的底层墙体强度不足、开间过大、形体复杂是导致其破坏的重要原因,在设计中,应适当提高砌体结构底层墙体的强度,控制房屋的开间,加强形体变化部位;砌体结构的窗下墙应作为连接墙肢的连梁考虑,可以将其设计成抗震设防的第一道防线;框架结构设计中,应考虑框架与填充墙的相互作用,考虑楼梯斜梁或斜板参与结构的整体受力;在现行规范要求的基础上,要适当增加框架柱的截面,节点附近的箍筋应采用焊接封闭箍或螺旋箍;应加强非结构构件的连接与锚固;对乡村房屋建设应予以监管,杜绝结构体系不明确的房屋出现。     

基于上限定理的抗滑群桩设计理论研究

针对抗滑群桩设计理论方面存在的问题,即荷载传递及滑坡推力分配的不确定性,基于极限分析的上限定理,给出了一种抗滑群桩的设计方法,即人为增大第一排抗滑桩的桩间距,并按极限土压力公式设计,作用在第二排抗滑桩上的荷载则按照上限定理给出。根据上述思想,并结合滑坡能量安全系数的定义和多块体体系速度场计算方法,提出了抗滑群桩的一种设计理论。     

不同抗震设计的砖混结构校舍抗震性能对比

砖混结构在我国中小学校舍中所占的比例较高,在近几年发生的地震中,其震害十分明显。以中原地区某县中小学校舍鉴定汇总结果为基础,取某砖混结构教学楼为例,分未考虑抗震设计、考虑抗震设计和未考虑抗震设计但进行了抗震加固改造三种工况,以PKPM软件对其进行抗震性能对比分析,并以此方法对该县中小学砖混结构校舍进行抗震性能计算及对比分析。结果表明,校舍中考虑抗震设计的工况比其它工况的抗震性能高,该地区2000年前的校舍需改造加固。     

多层混凝土框架工业厂房震害预测

近年来,由于我国地震的频频发生,部分钢筋混土框架结构的严重破坏和倒塌,特别是许多工业厂房,虽然是严格按照国家规范设计建造的,但是在罕遇地震作用下,该类厂房仍然受到了较大的破坏[2]。对单体多层混凝土框架工业厂房震害预测的步骤进行了简述,并结合某开发区一个算例进行了对比分析,针对多层混凝土框架工业厂房的特点,提出抗震设计建议,为抗震设计、加固提供一定的借鉴作用。     

面向智慧城市的分布式噪声管理系统设计

针对城市噪声污染多头管理、监测方法单一、治理效率低等问题,基于Android 4G技术城市环境噪声分布式监测设计思想,介绍智慧城市噪声分布式监测的应用方法。以移动终端作为传感器节点替代传统集中式噪声监测的分布式监测方法,依托云计算数据处理平台,解决了监测网络数据管理分散、定点检测站和一些手持检测设备收集数据引起的信息滞后的问题,有益于实现城市环境噪声污染数据分析、处理和融合等复杂功能,使各种质控任务和标准传递等复杂任务得到自动化执行与反馈,将对城市噪声污染联防联控起到积极推动作用。     

Information presentation compatibility in a simple digital control panel design: eye-tracking study

Various designs of typical digital control panels were analyzed experimentally from both the effectiveness and efficiency points of view. Subjects performed information comparison tasks aimed at keeping vehicle velocity at the same level. The experiment involved two versions of speedometers for displaying current and target velocities (clock-face and digital). The stimuli were also differentiated by the target velocity value (20, 50 and 80?km/h) and the correct response type (increase or decrease). Subjects’ performance results along with the eye-tracking data were qualitatively and quantitatively analyzed for all 24 experimental conditions.     

Evaluating the usability of a commercial cooling vest in the Hong Kong industries

Objective. The provision of appropriate personal cooling vests is recognized as an effective measure to combat heat stress. However, personal cooling vests are not widely implemented in the Hong Kong industries. The current study aims to evaluate the usability of a hybrid cooling vest that is associated with the success of its application in industrial settings. Methods. A self-administrated questionnaire focusing on 10 subjective attributes of cooling effect, ergonomic design and usability of a hybrid cooling vest was administered with 232 occupational workers in the construction, horticultural and cleaning, airport apron services and kitchen and catering industries. Results. A structural equation model estimated by analysis of moment structures was constructed to evaluate the usability of the cooling vest, as influenced by cooling effect and ergonomic design. Results showed that cooling effect (path coefficient?=?0.69, p?p?Conclusions. The structural equation model is feasible to examine the complex nature of the structural relationships among the subjective perceptions of personal cooling vests. The empirical findings furnish sound evidence for further optimization of the hybrid cooling vest in terms of cooling effect and ergonomic design for occupational workers.     

Non-powered hand tool improvement research for prevention of work-related problems: a review

Purpose. In lower-middle-income countries, most of the work is performed manually using non-ergonomic hand tools which results in work-related health problems. Using hand tools designed in line with ergonomic principles may play an important role in reducing work-related health concerns significantly. Methods. Scientific databases (PubMed, EBSCOhost) and e-publishers were searched for articles from 1985 to 2015 using the following keywords: ‘hand tool’, ‘ergonomics’, ‘usability’ and ‘design’. After applying selection criteria to 614 articles, 58 articles related to the physical design of hand tools were selected. Results. Seventeen articles were related to hand tool improvement in the manufacturing sector. Musculoskeletal disorders were found to be the most frequently occurring work-related health problems. Most of the articles focused on product and qualitative variables for improvement in hand tools, while few articles considered human and task variables. Conclusions. Literature shows that hand tool improvement studies have been given less importance in low-income and lower-middle-income countries. However, some work of significance is reported in the agriculture sectors of these countries. Hence, it is concluded that ergonomic intervention in hand tools is much needed for those industries which employ traditional methods of working.