Particulate air pollution in Lanzhou China

Concentrations of total suspended particles (TSP) and PM(10) in Lanzhou China have been kept high for the past two decades. Data collected during the intensive observational period from October 1999 to April 2001 show high TSP and PM(10) concentrations. Starting from November, the PM(10) pollution intensifies, and reaches mid to high alert level of air pollution, continues until April next year, and is at low alert level in the summer. In the winter and spring, the TSP concentration is 2-10 times higher than the third-level criterion of air quality (severe pollution). Effects of intrinsic factors (sources of pollution) and remote preconditions (propagation of dust storms) for severe PM(10) and TSP pollution in Lanzhou are analyzed.     

Emission factors of particulate matter, CO and CO2 in the pyrolytic processing of typical electronic wastes

A self-designed experimental device was employed to simulate the pyrolytic dismantling process of selected electronic wastes(E-wastes), including printed wiring boards(PWBs)and plastic casings. The generated particulate matter(PM) of different particle sizes, carbon monoxide(CO) and carbon dioxide(CO_2) were determined, and the corresponding emission factors(EFs) were estimated. Finer particles with particle sizes of 0.4–2.1 μm accounted for78.9% and 89.3% of PM emitted by the pyrolytic processing of PWBs and plastic casings,respectively, and the corresponding EFs were 9.68 ± 4.81 and 18.49 ± 7.2 g/kg, respectively.The EFs of CO and CO_2 from PWBs and plastic casings were 55.9 ± 26.9 and 1182 ± 439 g/kg,and 133.6 ± 34.6 and 2827 ± 276 g/kg, respectively. Compared with other emission sources,such as coal, biomass, and traffic exhaust, the EFs of E-wastes were relatively higher,especially for PM. There were significant positive correlations(p 0.05) of the initial contents of carbon and nitrogen in PWBs with the related EFs of PM, CO, and CO_2, while the correlations for plastic casings were insignificant. The EFs of CO of PWBs were significantly positively correlated with the corresponding EFs of PM and the parent polycyclic aromatic hydrocarbons(PAHs); however, the same result was not observed for plastic casings.     

Evaluation of the parameters influencing electrostatic charging of powder in a pipe flow

Triboelectric charging of powders during pneumatic transport can lead to hazardous spark discharges. In this study, the charging process was studied numerically by means of large eddy simulations. A range of design parameters was then analyzed statistically applying the Design of Experiments methodology. It is shown that the electric charge of the powder can be significantly decreased by reducing the conveying air velocity. Furthermore, the usage of pipes of a larger diameter and the application of higher solid mass flow rates also reduce the powder charge.     

Air quality at a snowmobile staging area and snow chemistry on and off trail in a Rocky Mountain subalpine forest, Snowy Range, Wyoming

A study was begun in the winter of 2000–2001 and continued through the winter of 2001–2002 to examine air quality at the Green Rock snowmobile staging area at 2,985 m elevation in the Snowy Range of Wyoming. The study was designed to evaluate the effects of winter recreation snowmobile activity on air quality at this high elevation site by measuring levels of nitrogen oxides (NO _x , NO), carbon monoxide (CO), ozone (O₃) and particulate matter (PM₁₀ mass). Snowmobile numbers were higher weekends than weekdays, but numbers were difficult to quantify with an infrared sensor. Nitrogen oxides and carbon monoxide were significantly higher weekends than weekdays. Ozone and particulate matter were not significantly different during the weekend compared to weekdays. Air quality data during the summer was also compared to the winter data. Carbon monoxide levels at the site were significantly higher during the winter than during the summer. Nitrogen oxides and particulates were significantly higher during the summer compared to winter. Nevertheless, air pollutants were well dispersed and diluted by strong winds common at the site, and it appears that snowmobile emissions did not have a significant impact on air quality at this high elevation ecosystem. Pollutant concentrations were generally low both winter and summer. In a separate study, water chemistry and snow density were measured from snow samples collected on and adjacent to a snowmobile trail. Snow on the trail was significantly denser and significantly more acidic with significantly higher concentrations of sodium, ammonium, calcium, magnesium, fluoride, and sulfate than in snow off the trail. Snowmobile activity had no effect on nitrate levels in snow.     

Pelagic-benthic coupling in a subtidal system of the North-Western Mediterranean

Suspended particulate matter, zooplankton, and macrobenthos dynamics were investigated in a shallow area of the Ligurian Sea (north-west Mediterranean) characterized by wide temporal variability over an annual cycle. As indicated by multivariate analyses, the seasonal dynamics can be summarized as follows: (1) a late winter-early spring phytoplankton bloom followed by high zooplankton and macrobenthos densities during the spring months; (2) low-quality particulate suspended matter in summer, and an increase in the importance of zooplankton taxa with a wide range of feeding strategies, a decrease in macrofaunal abundance, and an increase in deposit-feeders and predators; and (3) a second phytoplankton bloom in autumn, followed by an increase in copepod density and a low macrofaunal abundance. In conclusion, pelagic and benthic communities in the coastal area of the Ligurian Sea mainly seem to be controlled bottom-up. Our results suggest that the quality of the particulate organic matter may play an important role in determining the temporal changes of both plankton and benthic assemblages, while the direct influence of other environmental features (such as sediment grain size) is relevant only for some macrobenthic taxa (e.g. crustaceans).     

Air pollution and inhalation exposure to particulate matter of different sizes in rural households using improved stoves in central China

Household air pollution is considered to be among the top environmental risks in China.To examine the performance of improved stoves for reduction of indoor particulate matter(PM) emission and exposure in rural households, individual inhalation exposure to size-resolved PM was investigated using personal portable samplers carried by residents using wood gasifier stoves or improved coal stoves in a rural county in Central China.Concentrations of PM with different sizes in stationary indoor and outdoor air were also monitored at paired sites. The stationary concentrations of size-resolved PM in indoor air were greater than those in outdoor air, especially finer particles PM0.25. The daily averaged exposure concentrations of PM0.25, PM1.0, PM2.5 and total suspended particle for all the surveyed residents were 74.4 ± 41.1, 159.3 ± 74.3, 176.7 ± 78.1 and 217.9 ± 78.1 μg/m3,respectively. Even using the improved stoves, the individual exposure to indoor PM far exceeded the air quality guideline by WHO at 25 μg/m3. Submicron particles PM1.0 were the dominant PM fraction for personal exposure and indoor and outdoor air. Personal exposure exhibited a closer correlation with indoor PM concentrations than that for outdoor concentrations. Both inhalation exposure and indoor air PM concentrations in the rural households with gasifier firewood stoves were evidently lower than the reported results using traditional firewood stoves. However, local governments in the studied rural areas should exercise caution when widely and hastily promoting gasifier firewood stoves in place of improved coal stoves, due to the higher PM levels in indoor and outdoor air and personal inhaled exposure.     

传感技术在环境空气监测中的方法适用性研究

采用某品牌3台传感器,对环境空气中气态污染物(NO_2、SO_2、O_3、CO)和颗粒物(PM_(10)、PM_(2.5))进行为期1个月的连续监测,探讨传感技术在环境空气监测中的方法适用性。研究表明,3台传感器监测的各污染物质量浓度均显著相关,Pearson相关系数0.9(p0.01);监测的颗粒物与国控点数据显著相关且质量浓度水平接近,Pearson相关系数0.9(p0.01);PM_(2.5)传感器测定值相对于国控点数据的平均相对误差仅为-7.3%,均值绝对误差2μg/m~3;传感器在高湿度下的PM_(2.5)测定值与国控点数据相吻合,当相对湿度为80%～90%时,平均相对误差仅为-0.9%;传感器气态污染物测定值与国控点数据之间存在差异,电化学原理气态污染物传感器性能仍有待提升。     

Spatial variations in selected metal contents and particle size distribution in an urban and rural atmosphere of Islamabad, Pakistan

Spatial variations in total suspended particulate matter (TSP) were investigated for distribution of metals and particle size fractions in the urban and rural atmosphere of Islamabad, Pakistan. The metals Na, K, Fe, Mn, Pb, Cd, Cr, Zn, Ni and Co, and the particle fractions <2.5, 2.5-10, 10-100 and >100 microm were included in the study. TSP samples were trapped on glass fibre filters using high volume samplers and quantification of metals was done using Atomic Absorption Spectrometry employing HNO(3) based wet digestion. At the urban site, Na was dominant at 2.384 microg/m(3) followed by K, Fe and Zn with 0.778, 0.667 and 0.567 microg/m(3) as mean concentrations, respectively. The metal levels for the rural site ranged from 0.002 microg/m(3) for Cd to 1.077 microg/m(3) for Na. However, compared with the urban site, mean Pb concentration showed an almost two-fold enhancement, i.e., 0.163 Vs. 0.327 microg/m(3). Metals and particle size source identification was done using Principal Component Analysis and Cluster Analysis. Five sources were traced out for the urban site: industrial, soil, automobile emissions, metallurgical industries and excavation activities. For the rural site, four sources were recorded: agricultural, automotive emissions, excavation activities and metallurgical units. Collectively, for both the sites, PM(10-100) emerged as a major contributor to TSP, followed by PM(2.5-10), PM(<2.5) and PM(>100) in that order. The metals showed in general positive relationship with fine particulate fractions (PM(2.5-10), PM(<2.5)), and negative correlation with coarse fractions (PM(10-100), PM(>100)). Comparison with the corresponding data from various Asian sites revealed that the levels of Na, K, Fe, Mn, Co and Ni for the present study were lower than those reported for grossly polluted cities of the world.     

Inhalation health effects of fine particles from the co-combustion of coal and refuse derived fuel

This paper is concerned with health effects from the inhalation of particulate matter (PM) emitted from the combustion of coal, and from the co-combustion of refuse derived fuel (RDF) and pulverized coal mixtures, under both normal and low NO_x conditions. Specific issues focus on whether the addition of RDF to coal has an effect on PM toxicity, and whether the application of staged combustion (for low NO_x) may also be a factor in this regard.

Ash particles were sampled and collected from a pilot scale combustion unit and then re-suspended and diluted to concentrations of 1000 μg/m³. These particles were inhaled by mice, which were held in a nose-only exposure configuration. Exposure tests were for 1 h per day, and involved three sets (eight mice per set) of mice. These three sets were exposed over 8, 16, and 24 consecutive days, respectively. Pathological lung damage was measured in terms of increases in lung permeability.

Results show that the re-suspended coal/RDF ash appeared to cause very different effects on lung permeability than did coal ash alone. In addition, it was also shown that a “snapshot” of lung properties after a fixed number of daily 1-h exposures, can be misleading, since apparent repair mechanisms cause lung properties to change over a period of time. For the coal/RDF, the greatest lung damage (in terms of lung permeability increase) occurred at the short exposure period of 8 days, and thereafter appeared to be gradually repaired. Ash from staged (low NO_x) combustion of coal/RDF appeared to cause greater lung injury than that from unstaged (high NO_x) coal/RDF combustion, although the temporal behavior and (apparent) repair processes in each case were similar. In contrast to this, coal ash alone showed a slight decrease of lung permeability after 1 and 3 days, and this disappeared after 12 days. These observations are interpreted in the light of mechanisms proposed in the literature. The results all suggest that the composition of particles actually inhaled is important in determining lung injury. Particle size segregated leachability measurements showed that water soluble sulfur, zinc, and vanadium, but not iron, were present in the coal/RDF ash particles, which caused lung permeabilities to increase. However, the differences in health effects between unstaged and staged coal/RDF combustion could not be attributed to variations in pH values of the leachate.