Advances in emission control of diesel vehicles in China

Diesel vehicles have caused serious environmental problems in China. Hence, the Chinese government has launched serious actions against air pollution and imposed more stringent regulations on diesel vehicle emissions in the latest China VI standard. To fulfill this stringent legislation, two major technical routes, including the exhaust gas recirculation (EGR) and high-efficiency selective catalytic reduction (SCR) routes, have been developed for diesel engines. Moreover, complicated aftertreatment technologies have also been developed, including use of a diesel oxidation catalyst (DOC) for controlling carbon monoxide (CO) and hydrocarbon (HC) emissions, diesel particulate filter (DPF) for particle mass (PM) emission control, SCR for the control of NOx emission, and an ammonia slip catalyst (ASC) for the control of unreacted NH₃. Due to the stringent requirements of the China VI standard, the aftertreatment system needs to be more deeply integrated with the engine system. In the future, aftertreatment technologies will need further upgrades to fulfill the requirements of the near-zero emission target for diesel vehicles.     

Emission factors of particulate matter, CO and CO2 in the pyrolytic processing of typical electronic wastes

A self-designed experimental device was employed to simulate the pyrolytic dismantling process of selected electronic wastes(E-wastes), including printed wiring boards(PWBs)and plastic casings. The generated particulate matter(PM) of different particle sizes, carbon monoxide(CO) and carbon dioxide(CO_2) were determined, and the corresponding emission factors(EFs) were estimated. Finer particles with particle sizes of 0.4–2.1 μm accounted for78.9% and 89.3% of PM emitted by the pyrolytic processing of PWBs and plastic casings,respectively, and the corresponding EFs were 9.68 ± 4.81 and 18.49 ± 7.2 g/kg, respectively.The EFs of CO and CO_2 from PWBs and plastic casings were 55.9 ± 26.9 and 1182 ± 439 g/kg,and 133.6 ± 34.6 and 2827 ± 276 g/kg, respectively. Compared with other emission sources,such as coal, biomass, and traffic exhaust, the EFs of E-wastes were relatively higher,especially for PM. There were significant positive correlations(p 0.05) of the initial contents of carbon and nitrogen in PWBs with the related EFs of PM, CO, and CO_2, while the correlations for plastic casings were insignificant. The EFs of CO of PWBs were significantly positively correlated with the corresponding EFs of PM and the parent polycyclic aromatic hydrocarbons(PAHs); however, the same result was not observed for plastic casings.     

Potential factors and mechanism of particulate matters explosive increase induced by free radicals oxidation

Atmospheric particulate pollution in China has attracted much public attention. Occasionally, the particle number concentration increases sharply in a short time period, which is defined as a “particulate matter explosive increase”. Heavy particulate matter pollution not only reduces visibility but also has an adverse effect on human health. Hence, there is an urgent need to discover the causes of particulate matter explosive increase. During this campaign, the particle number concentration and free radicals were measured at a tall building on the campus of Lanzhou University of Technology. Additionally, we examined a series of chemicals to reproduce the observed particulate matter explosive increase in a smog chamber to determine its potential factors. Then, we analyzed the mechanism of particulate matter explosive increase in the presence of free radicals. We found that, among the potential inorganic and organic sources analyzed, a mixture of organic and SO₂ in the research region had a major effect on particulate matter explosive increase. Moreover, free radical oxidation has a large effect, especially in the formation of organic particulates.     

Particulate matter and downward flux in the Northern and Central Adriatic Sea

During four oceanographic cruises carried out in June 1996, February and June 1997, and February 1998, particulate matter characteristics and short-term downward fluxes measured with drifting sediment traps were studied in two areas of the Adriatic Sea. The investigated areas were located one south of the Po River delta, and the other in the central Adriatic between Pesaro and Ancona. In each area, a frontal system was detected and two stations inside and outside the front, i.e . in coastal and offshore areas, were selected. The particulate and dissolved matter revealed a higher concentration in the coastal areas with the highest values in the central Adriatic coastal zone in both February surveys. Total mass fluxes ranged within two orders of magnitude from 11 to 3139 r mg m d in the northern area and similarly from 20 to 3864 r mg r m r d in the southern one, with higher values in the coastal stations. The organic carbon accounted for 3-30% of total flux in the northern coastal station with higher values in June, whereas at the offshore station it ranged from 6 to 39% in summer, decreasing to values lower than 10% in February. In the southern zone the organic carbon content was less than 2% in winter and from 3 to 33% in summer. The organic carbon fluxes (1-82 and 6-71 r mg C m d in the northern and southern area) were comparable with others measured with drifting sediment traps in the same area, though much lower with respect to those measured with long-term moored sediment traps. The export of organic carbon from the photic layer (expressed as the percentage of primary production) in the northern area was less than 10% at the coastal station, reaching a maximum of 12% in the offshore area. In the central Adriatic area it was greater, with values reaching up to 66% at the coastal station in June 1996. The organic carbon loss via sedimentation from the POC pool was low ( i.e. <1.5% per day) at both stations in the northern zone, while in the southern area the export was generally greater, exceeding 10% in the offshore area.     

Evaluation of the parameters influencing electrostatic charging of powder in a pipe flow

Triboelectric charging of powders during pneumatic transport can lead to hazardous spark discharges. In this study, the charging process was studied numerically by means of large eddy simulations. A range of design parameters was then analyzed statistically applying the Design of Experiments methodology. It is shown that the electric charge of the powder can be significantly decreased by reducing the conveying air velocity. Furthermore, the usage of pipes of a larger diameter and the application of higher solid mass flow rates also reduce the powder charge.     

Mineralization of particulate organic matter derived from coral-reef organisms in reef sediments of the Gulf of Aqaba

In situ and laboratory incubation experiments in a fringing reef in the Gulf of Aqaba were performed to study degradation rates of particulate organic matter in reef sediments. Coral mucus, clam eggs, and zooxanthellae were used as model particulate organic compounds for these experiments. Aerobic and anaerobic mineralization rates were calculated by dissolved inorganic carbon (DIC) and O₂ fluxes from the sediments under different particulate organic matter additions. Fast enhancement (approximately twofold) of O₂ and DIC fluxes were found with the addition of coral mucus and clam eggs compared with control incubations without addition. Most of the degradation is believed to have occurred anaerobically rather than aerobically (DIC:O₂ ratios were 4.3–28.1). Higher degradation rates of coral mucus and clam eggs were estimated in carbonate sediment than in silicate sediment (1.2–1.6-fold), which was attributed to the different physical and chemical properties of both sediments. Our study shows the significance of the reef sediment as a suitable site for microbial degradation of particulate organic material excreted from different reef community organisms. This may increase the regeneration of nutrients in the reef environment necessary to sustain high biological productivity.     

Photolysis and photooxidation of typical gaseous VOCs by UV Irradiation: Removal performance and mechanisms

UV photodegradation of 27 typical VOCs was systematically investigated. Contribution of photolysis and photooxidation to VOCs removal was identified. Gaseous VOC could be partially converted to particles by 185/254 nm UV irradiation. The mineralization and conversion of 27 VOCs by UV irradiation were reported. Photodegradation by ultraviolet irradiation (UV) is increasingly applied in volatile organic compound (VOC) and odor gas treatments. In this study, 27 typical VOCs, including 11 hydrocarbons and 16 hydrocarbon derivatives, at 150–200 ppm in air and nitrogen gas were treated by a laboratory-scale UV reactor with 185/254 nm irradiation to systematically investigate their removal and conversion by UV irradiation. For the tested 27 VOCs, the VOC removal efficiencies in air were within the range of 13%–97% (with an average of 80%) at a retention time of 53 s, which showed a moderate positive correlation with the molecular weight of the VOCs (R = 0.53). The respective contributions of photolysis and photooxidation to VOC removal were identified for each VOC. According to the CO₂ results, the mineralization rate of the tested VOCs was within the range of 9%–90%, with an average of 41% and were negatively correlated to the molecular weight (R = -0.63). Many of the tested VOCs exhibited high concentration particulate matters in the off-gases with a 3–283 mg/m³ PM₁₀ range and a 2–40 mg/m³ PM_2.5 range. The carbon balance of each VOC during UV irradiation was analyzed based on the VOC, CO₂ and PM₁₀ concentrations. Certain organic intermediates and 23–218 ppm ozone were also identified in the off-gases. Although the UV technique exhibited a high VOC removal efficiency, its drawbacks, specifically low mineralization, particulate matters production, and ozone emission, must be considered prior to its application in VOC gas treatments.     

Air pollution and the demand for hospital services: a review

Time-series studies published since 1993 on the association between short-term changes in air quality and use of hospital services, including both inpatient and emergency room use, are reviewed. The use of nonparametric analysis, often incorporating generalized additive models (GAMs), has increased greatly since the early 1990s. There have also been three major multi-city studies, which together analyzed data from well over 100 cities in Europe and North America. Various air pollutants, especially ozone (O(3)), particulate matter (PM), nitrogen dioxide (NO(2)) and sulfur dioxide (SO(2)), were generally found to be significantly associated with increased use of hospital services. Ozone tends to have stronger effects in the summer during periods of higher concentrations. Several studies revealed synergistic effects between pollutants such as PM and SO(2). Overall, short-term exposure to air pollutants is found to be an important predictor of increased hospital and emergency room use around the world.     

我国大气颗粒物来源及特征分析

我国大气颗粒物来源复杂,呈现大气复合型污染特征,对主要污染源进行识别和定量,是制定城市空气质量改善措施的基础。本研究总结了2000年以来我国近30个城市大气可吸入颗粒物PM10源解析研究,结果表明我国大气颗粒物PM10主要来自六类源:扬尘(土壤尘、道路尘、建筑尘);燃煤;工业排放;机动车排放;生物质燃烧;SO2、NOx、VOCs氧化产生的二次颗粒物。研究还表明,不同地区不同季节大气颗粒物主要来源和相对贡献存在差异。近年来随着大气颗粒物控制措施的实施,城市PM10污染状况已明显改善,大气细颗粒物PM2.5越来越受关注,在制定空气质量达标方案时,各类燃烧源和二次颗粒物的重要性将进一步上升。     

Relationship between types of urban forest and PM2.5 capture at three growth stages of leaves

Particulate matter diameter ≤ 2.5 μm (PM_2.5) causes direct harm to human health. Finding forms of urban forest systems that with the ability to reduce the amount of particulate matter in air effectively is the aim of this study. Five commonly cultivated kinds of urban forest types were studied in Beijing city at three stages of leaf growth. Results show that the urban forest system is capable of storing and capturing dust from the air. The types of shrubs and broadleaf trees that have the ability to capture PM_2.5 from the air are most effective when leaves have fully developed. In the leafless season, the conifer and mixed tree types are the most effective in removing dust from the air. For all kinds of forest types and stages of leaf growth, the PM_2.5 concentration is highest in the morning but lower in the afternoon and evening. Grassland cannot control particles suspended in the air, but can reduce dust pollution caused by dust from the ground blown by the wind back into the air.