MUNICIPAL RESPONSES TO VOLATILE ORGANIC COMPOUNDS IN WISCONSIN GROUND WATER1

ABSTRACT: Contamination of ground water supplies with volatile organic compounds is a new and significant problem. Municipalities and their community water systems are often the first to discover ground water contamination because of the monitoring programs they are required to carry out. When contamination exceeds standards, some action is required. The responses of Wisconsin municipalities to volatile organic compounds that exceed standards in their ground water sources is described. Actions to protect human health are prompt, but the survey results indicate plumes of contaminated ground water are usually not treated. They may continue to migrate and contaminate other private and public wells.     

贵州喀斯特地区旅游资源的变异与可持续利用

喀斯特景观与民族文化是不可再生的旅游资源,其开发在促进喀斯特地区经济、文化发展的同时,也加剧了环境的损耗和地方特色的消失,旅游资源变异现象普遍发生。文中分析了资源变异的几种情况,并指出控制资源变异,实现可持续利用的途径     

Determination of Q1, an unknown organochlorine contaminant, in human milk, Antarctic air, and further environmental samples

Q1, an organochlorine component with the molecular formula C(9)H(3)Cl(7)N(2) and of unknown origin was recently identified in seal blubber samples from the Namibian coast (southwest of Africa) and the Antarctic. In these samples, Q1 was more abundant than PCBs and on the level of DDT residues. Furthermore, Q1 was more abundant in seals from the Antarctic than the Arctic. To prove this assumption, gas chromatography-electron-capture negative ion mass spectrometry (GC/ECNI-MS), which is sensitive and selective for Q1, allowed for screening of traces of Q1 even in samples with particularly high levels of other organochlorine contaminants. Q1 was isolated by high-performance liquid chromatography (HPLC) from a skua liver sample. A 1:1 mixture with trans-nonachlor in electron-capture detectors (ECDs) was used to determine the relative response factor with ECNI-MS. The ECNI-MS response of Q1 turned out to be 4.5 times higher than that of trans-nonachlor in an ECD. With GC/ECNI-MS in the selected ion-monitoring mode, four Antarctic and four Arctic air samples were investigated for the presence of Q1. In the Antarctic air samples, Q1 levels ranged from 0.7 to 0.9 fg/m(3). In Arctic air samples, however, Q1 was below the detection limit (<0.06 fg/m(3) or 60 ag/m(3)). We also report on high Q1 levels in selected human milk samples (12-230 microg/kg lipid) and, therefore, suggested that the unknown Q1 is an environmental compound whose origin and distribution should be investigated in detail. Our data confirm that Q1 is a bioaccumulative natural organochlorine product. Detection of a highly chlorinated natural organochlorine compound in air and human milk is novel.     

Photodegradation of tetraphenyltin contained in polychlorinated biphenyl-based transformer oil simulants in alkaline 2-propanol solution

The photodegradation of tetraphenyltin (TePT) contained in polychlorinated biphenyl (PCB)-based transformer oil simulants by ultraviolet (UV) irradiation in alkaline 2-propanol solutions was examined. In the absence of PCBs, the TePT level fell to below 1% of the initial concentration within 30 min. In the absence of both PCBs and an alkali, the concentrations of tri-, di-, and monophenyltins initially increased to a few milligrams per liter, and then reduced to below the detection limits within 90 min. The addition of an alkali to the reaction solution slightly accelerated the photodecomposition of TePT. The decomposition of other phenyltins (PTs) was also accelerated. When PCBs with concentrations of approximately 80 times the initial TePT concentration were added, only a small fraction of the TePT decomposed within 100 min. Moreover, the levels of PTs did not change during irradiation. TePT and other PTs did decompose when the level of PCBs was reduced to the same concentration as that of TePT; however, the decomposition rates were slower than those in the absence of PCBs. In the actual treatment process, TePT and other PTs in PCB-based transformer oil are decomposed by catalytic reduction, which is used after UV irradiation. Therefore, in the actual treatment of PCB-based transformer oil wastes, pollution due to PTs can be prevented.     

Application of magnetic field and iron in order to change medicinal products of <Emphasis Type="Italic">Ocimum basilicum</Emphasis>

In the present research, the effects of static magnetic field, with or without iron on the growth, the activity of certain enzymes (like polyphenol oxidase and phenyle alanine ammonialyase), the content of phenolic compounds and the essential oil composition of sweet basil (Ocimum basilicum) were studied. Treatment of plants with static magnetic field with or without iron led to decrease of the growth of plants as well as decrease in the activity of phenyle alanine ammonialyase and of phenolic compounds content. In addition in those plants exposed to magnetic field the amount of essential oils, notably of methyl chavicol, was increased. Exposure of plants to the magnetic field decreased the activity of polyphenol oxidase, whereas treatment of plants with iron when exposed to magnetic field increased polyphenol oxidase activity. In this group the content of essential oil was reduced.     

联苯代谢对微生物的生长胁迫及分裂抑制

以联苯/多氯联苯降解菌株R04（Rhodococcus sp.R04）和几种模式微生物为研究对象，利用高效液相色谱、荧光显微镜、扫描电子显微镜等分析微生物在联苯及其代谢物培养条件下细胞分裂和形态的变化.结果表明联苯及其代谢产物对红球菌R04和几种模式微生物细胞的分裂有抑制作用，并对部分微生物形态有影响.与前体-联苯及其代谢产物2-羟基-6-酮基-6-苯基-2，4-己二烯酸相比，2，3-二羟基联苯对G⁺、G^-细菌，或是酵母细胞分裂都有较强的抑制和形态的改变.2，3-二羟基联苯导致R.R04和缺陷型R.R04细胞形成不完整隔膜的比例增加；造成96.4%的大肠杆菌BL21细胞表面凹陷，胞质内容物流失，菌体体积缩小；导致枯草芽孢杆菌89.6%的细胞体积明显缩小；导致金黄色葡萄球菌基本没有细胞能形成完整的分裂隔膜；导致红酵母细胞能进行出芽生殖的比例从64.2%降低到19.3%，但对其细胞形态无明显改变.联苯代谢物2，3-二羟基联苯对红球菌R04及其它微生物细胞分裂和增殖的抑制作用比其前体-联苯强，建议在研究环境化合物与微生物互作时，应考虑环境化合物代谢的毒性效应.     

Investigation of carbonyl compound sources at a rural site in the Yangtze River Delta region of China

Carbonyl compounds are important intermediates in atmospheric photochemistry, but their primary sources are still not understood well. In this work, carbonyls, hydrocarbons, and alkyl nitrates were continuously measured during November 2011 at a rural site in the Yangtze River Delta region of China. Mixing ratios of carbonyls and hydrocarbons showed large fluctuations during the entire measurement. The average level for total measured volatile organic compounds during the pollution episode from 25th to 27th November, 2011 was 91.6 ppb, about 7 times the value for the clean period of 7th-8th, November, 2011. To preliminarily identify toluene sources at this site, the emission ratio of toluene to benzene (T/B) during the pollution episode was determined based on photochemical ages derived from the relationship of alkyl nitrates to their parent alkanes. The calculated T/B was 5.8 ppb/ppb, significantly higher than the values of 0.2-1.7 ppb/ppb for vehicular exhaust and other combustion sources, indicating the dominant influence of industrial emissions on ambient toluene. The contributions of industrial sources to ambient carbonyls were then calculated using a multiple linear regression fit model that used toluene and alkyl nitrates as respective tracers for industrial emission and secondary production. During the pollution episode, 18.5%, 69.0%, and 52.9% of measured formaldehyde, acetaldehyde, and acetone were considered to be attributable to industrial emissions. The emission ratios relative to toluene for formaldehyde, acetaldehyde, and acetone were determined to be 0.10, 0.20 and 0.40 ppb/ppb, respectively. More research on industrial carbonyl emission characteristics is needed to understand carbonyl sources better.     

Apportioning aldehydes: Quantifying industrial sources of carbonyls

<正>In their recent Journal of Environmental Sciences publication,Wang and colleagues provide field evidence that industrial activities can contribute substantially to atmospheric carbonyl concentrations(Wang et al.,2015).These results may helpto explain underestimations of carbonyl emissions in currently available emission inventories,and highlight the need for an improved understanding of industrial sources of this class of compounds.In the atmosphere,carbonyl compounds photolyze to yield     

Cu–Mn–Ce ternary mixed-oxide catalysts for catalytic combustion of toluene

Cu–Mn, Cu–Mn–Ce, and Cu–Ce mixed-oxide catalysts were prepared by a citric acid sol–gel method and then characterized by XRD, BET, H₂-TPR and XPS analyses. Their catalytic properties were investigated in the toluene combustion reaction. Results showed that the Cu–Mn–Ce ternary mixed-oxide catalyst with 1:2:4 mole ratios had the highest catalytic activity, and 99% toluene conversion was achieved at temperatures below 220°C. In the Cu–Mn–Ce catalyst, a portion of Cu and Mn species entered into the CeO₂ fluorite lattice, which led to the formation of a ceria-based solid solution. Excess Cu and Mn oxides existed on the surface of the ceria-based solid solution. The coexistence of Cu–Mn mixed oxides and the ceria-based solid solution resulted in a better synergetic interaction than the Cu–Mn and Cu–Ce catalysts, which promoted catalyst reducibility, increased oxygen mobility, and enhanced the formation of abundant active oxygen species.