Atmospheric partitioning and the air–water exchange of polycyclic aromatic hydrocarbons in a large shallow Chinese lake (Lake Chaohu)

The residual levels of polycyclic aromatic hydrocarbons (PAHs) in the atmosphere and in dissolved phase from Lake Chaohu were measured by (GC–MS). The composition and seasonal variation were investigated. The diffusive air–water exchange flux was estimated by a two-film model, and the uncertainty in the flux calculations and the sensitivity of the parameters were evaluated. The following results were obtained: (1) the average residual levels of all PAHs (PAH16) in the atmosphere from Lake Chaohu were 60.85 ± 46.17 ng m⁻³ in the gaseous phase and 14.32 ± 23.82 ng m⁻³ in the particulate phase. The dissolved PAH16 level was 173.46 ± 132.89 ng L⁻¹. (2) The seasonal variation of average PAH16 contents ranged from 43.09 ± 33.20 ng m⁻³ (summer) to 137.47 ± 41.69 ng m⁻³ (winter) in gaseous phase, from 6.62 ± 2.72 ng m⁻³ (summer) to 56.13 ± 22.99 ng m⁻³ (winter) in particulate phase, and 142.68 ± 74.68 ng L⁻¹ (winter) to 360.00 ± 176.60 ng L⁻¹ (summer) in water samples. Obvious seasonal trends of PAH16 concentrations were found in the atmosphere and water. The values of PAH16 for both the atmosphere and the water were significantly correlated with temperature. (3) The monthly diffusive air–water exchange flux of total PAH16 ranged from −1.77 × 10⁴ ng m⁻² d⁻¹ to 1.11 × 10⁵ ng m⁻² d⁻¹, with an average value of 3.45 × 10⁴ ng m⁻² d⁻¹. (4) The results of a Monte Carlo simulation showed that the monthly average PAH fluxes ranged from −3.4 × 10³ ng m⁻² d⁻¹ to 1.6 × 10⁴ ng m⁻² d⁻¹ throughout the year, and the uncertainties for individual PAHs were compared. (5) According to the sensitivity analysis, the concentrations of dissolved and gaseous phase PAHs were the two most important factors affecting the results of the flux calculations.     

Anaerobic degradation of five polycyclic aromatic hydrocarbons from river sediment in Taiwan

This study investigated the anaerobic degradation of five polycyclic aromatic hydrocarbons (PAHs) from Erren River sediment in southern Taiwan. The degradation rates of PAH were in the order: acenaphthene > fluorene > phenanthrene > anthracene > pyrene. The degradation rate was enhanced when the five compounds were present simultaneously in river sediment. Comparison of the PAH degradation rates under three reducing conditions showed the following order: sulfate-reducing conditions > methanogenic conditions > nitrate-reducing conditions. The addition of electron donors (acetate, lactate and pyruvate) enhanced PAH degradation under methanogenic and sulfate-reducing conditions. However, the addition of acetate, lactate or pyruvate inhibited PAH degradation under nitrate-reducing conditions. The addition of heavy metals, nonylphenol and phthalate esters (PAEs) inhibited PAH degradation. Our results show that sulfate-reducing bacteria, methanogen and eubacteria are involved in the degradation of PAH; sulfate-reducing bacteria constitute a major microbial component in PAH degradation. Of the microorganism strains isolated from the sediment samples, we found that strain ER9 expressed the greatest biodegrading ability.     

Low-maturity Kulthieth Formation Coal: A Possible Source of Polycyclic Aromatic Hydrocarbons in Benthic Sediment of the Northern Gulf of Alaska

The successful application of forensic geology to contamination studies involving natural systems requires identification of appropriate endmembers and an understanding of the geologic setting and processes affecting the systems. Studies attempting to delineate the background, or natural, source for hydrocarbon contamination in Gulf of Alaska (GOA) benthic sediments have invoked a number of potential sources, including seep oils, source rocks, and coal. Oil seeps have subsequently been questioned as significant sources of hydrocarbons present in benthic sediments of the GOA in part because the pattern of relative polycyclic aromatic hydrocarbon (PAH) abundance characteristic of benthic GOA sediments is inconsistent with patterns typical of weathered seep oils. Likewise, native coal has been dismissed in part because ratios of labile hydrocarbons to total organic carbon (e.g. PAH: TOC) for Bering River coal field (BRCF) sources are too low--i.e. the coals are over mature--to be consistent with GOA sediments. We present evidence here that native coal may have been prematurely dismissed, because BRCF coals do not adequately represent the geochemical signatures of coals elsewhere in the Kulthieth Formation. Contrary to previous thought, Kulthieth Formation coals east of the BRCF have much higher PAH: TOC ratios, and the patterns of labile hydrocarbons in these low thermal maturity coals suggest a possible genetic relationship between Kulthieth Formation coals and nearby oil seeps on the Sullivan anticline. Analyses of low-maturity Kulthieth Formation coal indicate the low maturity coal is a significant source of PAH. Source apportionment models that neglect this source will underestimate the contribution of native coals to the regional background hydrocarbon signature.     

Improved and Standardized Methodology for Oil Spill Fingerprinting

The existing Nordtest methodology for oil spill Identification has over the past 10 years formed an important "platform" for solving oil spill identification cases both in the Scandinavian countries as well as other countries in Europe, the USA and Canada. " Revision of the Nordtest Methodology for Oil Spill Identification " is a cooperative project between the National Oil Spill Identification laboratories in Norway, Sweden, Finland, Denmark and the Battelle Memorial Institute (Duxbury) in the USA. The goals of the project are: (1) to refine the existing Nordtest methodology into a technically more robust and defensible oil spill identification methodology with focus on determination of quantitative diagnostic indices (ratios) and (2) to adjust the revised Nordtest methodology into guidelines for the European Committee for Standardization (CEN). This paper presents the recommended methodology for the analytical oil spill identification part. The sampling techniques and handling of oil samples and background (reference) samples prior to their arrival at the environmental forensic laboratory is not covered in this paper. The recommended methodology approach is a result of documented analytical improvements and a more quantitative treatment of analytical data from gas chromatographic-flame ionization detector (GC/FID) and gas chromatographic-mass spectrometer methods (GC/MS-SIM) and the operational experiences over past few years among the participating forensic laboratories. The experience and literature in the field of oil exploration and production geochemistry have also played an important role for the recommended methodology. The results from a recent Round Robin test carried out among 12 laboratories using this new methodology are presented in a separate paper in this issue (Faksness et at ., 2002d).     

Petroleum contaminated soil in Oman: Evaluation of bioremediation treatment and potential for reuse in hot asphalt mix concrete

This paper presents a study that aims at evaluating the leaching characteristics of petroleum contaminated soils as well as their application in hot mix asphalt concrete. Soil samples are environmentally characterized in terms of their total heavy metals and hydrocarbon compounds and leachability. The total petroleum hydrocarbon (TPH) present in the PCS before and after treatment was determined to be 6.8% and 5.3% by dry weight, indicating a reduction of 1% in the TPH of PCS due to the current treatment employed. Results of the total heavy metal analysis on soils indicate that the concentrations of heavy metals are lower when extraction of the soil samples is carried out using hexane in comparison to TCE. The results show that the clean soils present in the vicinity of contaminated sites contain heavy metals in the following decreasing order: nickel (Ni), followed by chromium (Cr), zinc (Zn), copper (Cu), lead (Pb), and vanadium (V). The current treatment practice employed for remediation of the contaminated soil reduces the concentrations of nickel and chromium, but increases the concentrations of all remaining heavy metals.     

Toxic Environmental Releases from Medical Waste Incineration: A Review

Toxic releases from medical waste incineration comprising organic emissions such as polychlorinated dibenzo-dioxin/furan (PCDD/Fs) and polycyclic aromatic hydrocarbons (PAHs), inorganic emissions and ashes containing toxic metals have been reviewed. Attempts made by various investigators to reduce/eliminate emissions have also been included. Legislations concerning emission standards for medical waste incinerators have been discussed.     

Lead and polycyclic aromatic hydrocarbons (PAHs) in surface soil from day care centres in the city of Bergen, Norway

Surface soil (0-2cm) quality in 87 day care centres in the city of Bergen, Norway has been studied. Approximately 45% of the day care centres contained Pb and PAH values above recommended action levels. There are clear variations between different areas of the city. The old central part of the city hosts most of the contaminated day care centres. In suburban areas most of the day care centres have Pb and PAH concentrations below action levels. City fires, gas work emission, lead-based paint, and traffic are probably important anthropogenic contamination sources, together with uncontrolled transportation of soil from contaminated to clean areas. Geological or other natural sources are probably not an important contributor to the high levels of lead and PAH.     

Estimation of the annual scavenged amount of polycyclic aromatic hydrocarbons by forests in the Pearl River Delta of Southern China

Leaves of six main tree species from the Pearl River Delta (PRD) in Southern China were collected to identify the interspecific variability, the spatial variability and the seasonal variations of polycyclic aromatic hydrocarbons' (PAHs) concentrations, and to calculate the amount of PAHs removed by leaves. PAHs concentrations in pine needles were much higher than in broad-leaves and leaves from urban/industrial areas (Baiyunshan and Heshan) exhibited two times greater concentrations than leaves from the rural area (Dinghushan). Seasonal variations of PAHs in leaves occurred with lesser concentrations in September. Leaves in PRD scavenged 3.7 ± 0.9 t PAHs y⁻¹, accounting for about 10% of the total amount emitted in this region. This result suggests that forests play an important role in the fate of PAHs.     

Bioremediation of oil-contaminated soil using Candida catenulata and food waste

Even though petroleum-degrading microorganisms are widely distributed in soil and water, they may not be present in sufficient numbers to achieve contaminant remediation. In such cases, it may be useful to inoculate the polluted area with highly effective petroleum-degrading microbial strains to augment the exiting ones. In order to identify a microbial strain for bioaugmentation of oil-contaminated soil, we isolated a microbial strain with high emulsification and petroleum hydrocarbon degradation efficiency of diesel fuel in culture. The efficacy of the isolated microbial strain, identified as Candida catenulata CM1, was further evaluated during composting of a mixture containing 23% food waste and 77% diesel-contaminated soil including 2% (w/w) diesel. After 13 days of composting, 84% of the initial petroleum hydrocarbon was degraded in composting mixes containing a powdered form of CM1 (CM1-solid), compared with 48% of removal ratio in control reactor without inoculum. This finding suggests that CM1 is a viable microbial strain for bioremediation of oil-contaminated soil with food waste through composting processes.     

Volatile pollutants emitted from selected liquid household products

BACKGROUND, AIM, AND SCOPE: To identify household products that may be potential sources of indoor air pollution, the chemical composition emitted from the products should be surveyed. Although this kind of survey has been conducted by certain research groups in Western Europe and the USA, there is still limited information in scientific literature. Moreover, chemical components and their proportions of household products are suspected to be different with different manufacturers. Consequently, the current study evaluated the emission composition for 42 liquid household products sold in Korea, focusing on five product classes (deodorizers, household cleaners, color removers, pesticides, and polishes). MATERIALS AND METHODS: The present study included two phase experiments. First, the chemical components and their proportions in household products were determined using a gas chromatograph and mass spectrometer system. For the 19 target compounds screened by the first phase of the experiment and other selection criteria, the second phase was done to identify their proportions in the purged-gas phase. RESULTS: The number of chemicals in the household products surveyed ranged from 9 to 113. Eight (product class of pesticides) to 17 (product class of cleaning products) compounds were detected in the purged-gas phase of each product class. Several compounds were identified in more than one product class. Six chemicals (acetone, ethanol, limonene, perchloroethylene (PCE), phenol, and 1-propanol) were identified in all five product classes. There were 13 analytes occurring with a frequency of more than 10% in the household products: limonene (76.2%), ethanol (71.4%), PCE (66.7%), phenol (40.5%), 1-propanol (35.7%), decane (33%), acetone (28.6%), toluene (19.0%), 2-butoxy ethanol (16.7%), o-xylene (16.7%), chlorobenzene (14.3%), ethylbenzene (11.9%), and hexane (11.9%). All of the 42 household products analyzed were found to contain one or more of the 19 compounds. DISCUSSION: The chemical composition varied broadly along with the product classes or product categories, and it was different from that reported in other studies abroad, although certain target chemicals were identified in both studies. This finding supports an assertion that chemical components emitted from household products may be different in different products and with different manufacturers. The chlorinated pollutants identified in the present study have not been reported to be components of cleaning products in papers published since the early 1990s. Limonene was identified as having the highest occurrence in the household products in the present study, although it was not detected in any of 67 household products sold in the U.S. CONCLUSIONS: The emission composition of selected household products was successfully examined by purge-and-trap analysis. Along with other exposure information such as use pattern of household products and the indoor climate, this composition data can be used to estimate personal exposure levels of building occupants. This exposure data can be employed to link environmental exposure to health risk. It is noteworthy that many liquid household products sold in Korea emitted several toxic aromatic and chlorinated organic compounds. Moreover, the current finding suggests that product types and manufacturers should be considered, when evaluating building occupants' exposure to chemical components emitted from household products. RECOMMENDATIONS AND PERSPECTIVES: The current findings can provide valuable information for the semiquantitative estimation of the population inhalation exposure to these compounds in indoor environments and for the selection of safer household products. However, although the chemical composition is known, the emissions of household products might include compounds formed during the use of the product or compounds not identified as ingredients by this study. Accordingly, further studies are required, and testing must be done to determine the actual composition being emitted. Similar to eco-labeling of shampoos, shower gels, and foam baths proposed by a previous study, eco-labeling of other household products is suggested.