Computational investigation of the effects of knee airbag design on the interaction with occupant lower extremity in frontal and oblique impacts

Objective: The lower extremity of the occupant represents the most frequently injured body region in motor vehicle crashes. Knee airbags (KABs) have been implemented as a potential countermeasure to reduce lower extremity injuries. Despite the increasing prevalence of KABs in vehicles, the biomechanical interaction of the human lower extremity with the KAB has not been well characterized. This study uses computational models of the human body and KABs to explore how KAB design may influence the impact response of the occupant's lower extremities.

Methods: The analysis was conducted using a 50th percentile male occupant human body model with deployed KABs in a simplified vehicle interior. The 2 common KAB design types, bottom-deploy KAB (BKAB) and rear-deploy KAB (RKAB), were both included. A state-of-the-art airbag modeling technique, the corpuscular particle method, was adopted to represent the deployment dynamics of the unfolding airbags. Validation of the environment model was performed based on previously reported test results. The kinematic responses of the occupant lower extremities were compared under both KAB designs, 2 seating configurations (in-position and out-of-position), and 3 loading conditions (static, frontal, and oblique impacts). A linear statistical model was used to assess factor significance considering the impact responses of the occupant lower extremities.

Results: The presence of a KAB had a significant influence on the lower extremity kinematics compared to no KAB (P <.05) by providing early restraint and distributing contact force on the legs during airbag deployment. For in-position occupants, the KAB generally tended to decrease tibia loadings. The RKAB led to greater lateral motion of the legs compared to the BKAB, resulting in higher lateral displacement at the knee joint and abduction angle change (51.2 ± 21.7 mm and 15° ± 6.0°) over the dynamic loading conditions. Change in the seating position led to a significant difference in occupant kinematic and kinetic parameters (P <.05). For the out-of-position (forward-seated) occupant, the earlier contact between the lower extremity and the deploying KAB resulted in 28.4° ± 5.8° greater abduction, regardless of crash scenarios. Both KAB types reduced the axial force in the femur relative to no KAB. Overall, the out-of-position occupant sustained a raised axial force and bending moment of the tibia by 0.8 ± 0.2 kN and 21.1 ± 8.7 Nm regardless of restraint use.

Conclusions: The current study provided a preliminary computational examination on KAB designs based on a limited set of configurations in an idealized vehicle interior. Results suggested that the BKAB tended to provide more coverage and less leg abduction compared to the RKAB in oblique impact and/or the selected out-of-position scenario. An out-of-position occupant was associated with larger abduction and lower extremity loads over all occupant configurations. Further investigations are recommended to obtain a full understanding of the KAB performance in a more realistic vehicle environment.     

Keeping the blood flowing—plasminogen activator genes and feeding behavior in vampire bats

The blood feeding vampire bats emerged from New World leaf-nosed bats that fed on fruit and insects. Plasminogen activator, a serine protease that regulates blood coagulation, is known to be expressed in the saliva of Desmodus rotundus (common vampire bat) and is thought to be a key enzyme for the emergence of blood feeding in vampire bats. To better understand the evolution of this biological function, we studied the plasminogen activator (PA) genes from all vampire bat species in light of their feeding transition to bird and subsequently mammalian blood. We include the rare species Diphylla ecaudata and Diaemus youngi, where plasminogen activator had not previously been studied and demonstrate that PA gene duplication observed in Desmodus is not essential to the vampire phenotype, but relates to the emergence of predominant mammalian blood feeding in this species. Plasminogen activator has evolved through gene duplication, domain loss, and sequence evolution leading to change in fibrin-specificity and susceptibility to plasminogen activator inhibitor-1. Before undertaking this study, only the four plasminogen activator isoforms from Desmodus were known. The evolution of vampire bat plasminogen activators can now be linked phylogenetically to the transition in feeding behavior among vampire bat species from bird to mammalian blood. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Aquatic Plant and Dissolved Oxygen Changes in a Reference‐Condition Prairie Stream Subjected to Experimental Nutrient Enrichments

Effects of controlled nutrient additions on a prairie stream were studied using a before‐after‐control‐impact paired design. The site is in a reference condition with low soluble nitrate (NO₃) and phosphate (soluble reactive phosphorus [SRP]) in summer (3 μg NO₃‐N/L, 4 μg SRP/L). Nutrients were added to two reaches over the growing season at two levels (Low Dose — 39 μg NO₃‐N/L and 4.4 SRP/L; High Dose — 119 μg NO₃‐N/L and 15.6 μg SRP/L). Continuously measured dissolved oxygen (DO) and changes in aquatic flora were compared to an upstream Control. Enrichment led microalgae and filamentous algae to increase in density, areal coverage, and thickness, and the magnitude of the changes were largely concordant with dosing (more in the High Dose); algal growth also suppressed macrophytes in the High Dose. Enrichment caused significant increases in diel DO swings whose magnitudes were consistent with dosing level. In the High Dose, benthic algae flourished in the growing season and then senesced en masse in fall. The decomposing algae led DO to crash (ca. 0 mg/L on the bottom), but DO impacts were out‐of‐sync with peak algal growth and photosynthesis, which occurred weeks earlier. This finding provides a plausible explanation as to why high DO delta in streams impacts aquatic life even when concurrently measured DO is not low. When DO crashed, DO was longitudinally patchy, some areas having low DO near the bottom, others near saturation. Geomorphology and exposure to wind may have caused this pattern.     

Storm impacts along European coastlines. Part 2: lessons learned from the MICORE project

This paper describes the MICORE approach to quantify for nine field sites the crucial storm related physical hazards (hydrodynamic as well as morphodynamic) in support of early warning efforts and emergency response.As a first step historical storms that had a significant morphological impact on a representative number of sensitive European coastal stretches were reviewed and analysed in order to understand storm related morphological changes and how often they occur around Europe. Next, an on-line storm prediction system was set up to enable prediction of storm related hydro- and morphodynamic impacts. The system makes use of existing off-the-shelf models as well as a new open-source morphological model. To validate the models at least one year of fieldwork was done at nine pilot sites. The data was safeguarded and stored for future use in an open database that conforms to the OpenEarth protocols.To translate quantitative model results to useful information for Civil Protection agencies the Frame of Reference approach ( [Van Koningsveld et al., 2005] and [Van Koningsveld et al., 2007] ) was used to derive Storm Impact Indicators (SIIs) for relevant decision makers. The acquired knowledge is expected to be directly transferred to the civil society trough partnerships with end-users at the end of the MICORE project.     

我国对大湄公河次区域国家投资与贸易环境影响的估算研究

本文运用改进的IPCC延伸法,将资源环境要素引入投资与贸易核算,将经济价值量引入排放因子,将CO2排放量作为环境影响的一个指标,从国家层面估算投资贸易的环境影响。结果表明:我国对大湄公河次区域国家投资与贸易带来的环境影响,总体利好,各国有差异。     

LANDSCAPE‐SCALE ANALYSIS AND MANAGEMENT OF CUMULATIVE IMPACTS TO RIPARIAN ECOSYSTEMS: PAST,PRESENT, AND FUTURE1

ABSTRACT: Analyses of cumulative impacts to riparian systems is an important yet elusive goal. Previous analyses have focused on comparing the number of hectares impacted to the number of hectares restored, without addressing the loss of riparian function or the effect of the spatial distribution of impacts. This paper presents an analysis of the spatial distribution of development‐related impacts to riparian ecosystems, that were authorized under Section 404 of the Clean Water Act. Impacts on habitat structure, contiguity, and landscape context were evaluated using functional indices scaled to regional reference sites. Impact sites were mapped using GIS and analyzed for spatial associations. Positive spatial autocorrelation (i.e. clustering of impact sites) resulted from the piecemeal approach to impact assessment, which failed to prevent cumulative impacts. Numerous small projects in close proximity have resulted in adverse impacts to entire stream reaches or have fragmented the aquatic resources to a point where overall functional capacity is impaired. Additionally, the ecological functions of unaffected areas have been diminished due to their proximity to degraded areas. A proactive approach to managing cumulative impacts is currently being used in Orange County, California as part of a Corps of Engineers sponsored Special Area Management Plan (SAMP). The SAMP process is evaluating the ecological conditions and physical processes of the study watersheds and attempting to plan future development in a manner that will guard against cumulative impacts.     

Model‐Based Nitrogen and Phosphorus (Nutrient) Criteria for Large Temperate Rivers: 2. Criteria Derivation

Nitrogen and phosphorus criteria were developed for 233 km of the Yellowstone River, one of the first cases where a mechanistic model has been used to derive large river numeric nutrient criteria. A water quality model and a companion model which simulates lateral algal biomass across transects were used to simulate effects of increasing nutrients on five variables (dissolved oxygen, total organic carbon, total dissolved gas, pH, and benthic algal biomass in depths ≤1 m). Incremental increases in nutrients were evaluated relative to their impact on predefined thresholds for each variable; the first variable to exceed a threshold set the nutrient criteria. Simulations were made at a low flow, the 14Q5 (lowest average 14 consecutive day flow, July‐September, recurring one in five years), which was derived using benthic algae growth curves and EPA guidance on excursion frequency. An extant climate dataset with an annual recurrence was used, and tributary water quality and flows were coincident with the river's 10 lowest flow years. The river had different sensitivities to nutrients longitudinally, pH being the most sensitive variable in the upstream reach and algal biomass in the lower. Model‐based criteria for the Yellowstone River are as follows: between the Bighorn and Powder river confluences, 55 μg TP/l and 655 μg TN/l; from the Powder River confluence to Montana state line, 95 μg TP/l and 815 μg TN/l. Pros and cons of using steady‐state models to derive river nutrient criteria are discussed.     

Monitoring Diffuse Impacts: Australian Tourism Developments

/ The scientific quality of monitoring for diffuse environmental impacts has rarely been quantified. This paper presents an analysis of all formal environmental monitoring programs for Australian tourism developments over a 15-year period from 1980 to 1995. The tourism sector provides a good test bed for this study because tourism developments are (1) often adjacent to or even within conservation reserves and other relatively undisturbed natural environments, and (2) often clustered, with resulting cumulative impacts that require detection at an early stage. Here we analyze the precision and reliability with which monitoring programs as actually implemented can detect diffuse environmental impacts against natural variation. Of 175 Australian tourism developments subject to EIA from 1980 to 1993 inclusive, only 13 were subject to formal monitoring. Only 44 individual parameters, in total, were monitored for all these developments together. No baseline monitoring was conducted for nine of the 44 parameters. For the remaining 35, only one was monitored for a full year. Before, after, control, impact, paired sampling (BACIP) monitoring designs were used for 24 of the 44 parameters, and power analysis in 10. The scientific quality of monitoring was significantly better for developments subject to control by the Great Barrier Reef Marine Park Authority (GBRMPA). The key factor appears to be the way in which GBRMPA uses external referees and manages external consultants. The GBRMPA model merits wider adoption.     

多种政策对经济-环境系统的综合作用分析

提出了一套分析多种政策手段对社会经济系统物质流和价值流变化的综合作用的理论概念,弥补了现有不足.在理论概念的基础上,构建了由7个子模块组成的具体模型框架,以反映多种政策手段共同实施对物质流和价值流变化的综合作用.以我国为案例,利用提出的模型框架评估了我国7类典型环境经济政策对我国经济增长和物质流变化的综合和单独作用,证明了综合分析的必要性.     

Environmental consequence analysis for resource depletion

Resource depletion is of concern to both present and future generations in terms of access to resources. It is a prominent impact category within life cycle assessment (LCA) and sustainability assessment. This paper examines existing resource depletion approaches and indicators in the context of natural gas depletion, and their limitations in modelling the wider environmental consequences of resource consumption. Some existing models assume substitution of scarce fossil fuels with an alternative fossil fuel or mix, but do not consider all of the subsequent change in impacts. An additional methodology is proposed to measure the impact changes when fossil fuel substitution occurs as a result of scarcity. The methodology will demonstrate the effect of resource scarcity for individual processes but also multiple processes which operate at different levels of resource consumption with varying degrees of impacts. The methodology is applied to a scarcity situation of natural gas in Australia, where black coal is substituted for gas. It is first applied to natural gas consumed for electricity generation only. In the second case, the methodology is applied to the substitution of natural gas for both electricity generation and hydrogen production. The varying impacts on emissions to air and water, together with solid waste generation and water depletion, as a result of the substitution are used to reflect the consequences of fossil fuel depletion. The indicators also provide information on the impacts of substitution in each product, thus enabling users to prioritise products based on the impacts produced during natural gas allocation.