Implementation of a windblown dust parameterization into MODELS-3/CMAQ: Application to episodic PM events in the US/Mexico border

Windblown dust is known to impede visibility, deteriorate air quality and modify the radiation budget. Arid and semiarid areas with unpaved and unvegetated land cover are particularly prone to windblown dust, which is often attributed to high particulate matter (PM) pollution in such areas. Yet, windblown dust is poorly represented in existing regulatory air quality models. In a study by the authors on modeling episodic high PM events along the US/Mexico border using the state-of-the-art CMAQ/MM5/SMOKE air quality modeling system [Choi, Y.-J., Hyde, P., Fernando, H.J.S., 2006. Modeling of episodic particulate matter events using a 3D air quality model with fine grid: applications to a pair of cities in the US/Mexico border. Atmospheric Environment 40, 5181–5201], some of the observed PM₁₀ NAAQS exceedances were inferred as due to windblown dust, but the modeling system was incapable of dealing with time-dependent episodic dust entrainment during high wind periods. In this paper, a time-dependent entrainment parameterization for windblown dust is implemented in the CMAQ/MM5/SMOKE modeling system with the hope of improving PM predictions. An approach for realizing windblown dust emission flux for each grid cell over the study domain on an hourly basis, which accounts for the influence of factors such as soil moisture content, atmospheric stability and wind speed, is presented in detail. Comparison of model predictions with observational data taken at a pair of US/Mexico border towns shows a clear improvement of model performance upon implementation of the dust emission flux parameterization.     

漂浮负载型光催化剂制备及降解草甘膦研究

以漂珠(FP)为载体,采用溶胶-凝胶-浸渍法制备了漂浮负载型CdS/TiO2/FP复合膜光催化剂,通过SEM、XRD对其结构进行了表征.以甘草膦农药的光催化降解为模型反应,使用不同光源研究了CdS/TiO2/FP的光催化性能,探讨了影响催化剂活性的因素及采用太阳光做光源处理草甘膦的可行性.结果表明,经4层镀膜500℃热处理的20%(w/w)CdS/TiO2/FP光催化剂具有良好的光催化性能,最佳降解条件为:催化剂加入量3 g/L,初始pH 7～9,Fe2 浓度为2.0×10-3 mol/L.通气量200 mL/min.在最佳条件下,对135 mg/L草甘膦溶液降解率可以分别达到96.3%(125 W高压汞灯,60 min)和82.4%(太阳光,180 min).     

Phosphorus Load Reduction Goals for Feitsui Reservoir Watershed, Taiwan

The present paper describes an effort for developing the total maximum daily load (TMDL) for phosphorus and a load reduction strategy for the Feitsui Reservoir in Northern Taiwan. BASINS model was employed to estimate watershed pollutant loads from nonpoint sources (NPS) in the Feitsui Reservoir watershed. The BASINS model was calibrated using field data collected during a 2-year sampling period and then used to compute watershed pollutant loadings into the Feitsui Reservoir. The simulated results indicate that the average annual total phosphorus (TP) loading into the reservoir is 18,910 kg/year, which consists of non-point source loading of 16,003 kg/year, and point source loading of 2,907 kg/year. The Vollenweider mass balance model was used next to determine the degree of eutrophication under current pollutant loading and the load reduction needed to keep the reservoir from being eutrophic. It was estimated that Feitsui Reservoir can becoming of the oligotrophic state if the average annual TP loading is reduced by 37% or more. The results provide the basis on which an integrated control action plan for both point and nonpoint sources of pollution in the watershed can be developed.     

Use of USLE/GIS Methodology for Predicting Soil Loss in a Semiarid Agricultural Watershed

The Universal Soil Loss Equation (USLE) is an erosion model to estimate average soil loss that would generally result from splash, sheet, and rill erosion from agricultural plots. Recently, use of USLE has been extended as a useful tool predicting soil losses and planning control practices in agricultural watersheds by the effective integration of the GIS-based procedures to estimate the factor values in a grid cell basis. This study was performed in the Kazan Watershed located in the central Anatolia, Turkey, to predict soil erosion risk by the USLE/GIS methodology for planning conservation measures in the site. Rain erosivity (R), soil erodibility (K), and cover management factor (C) values of the model were calculated from erosivity map, soil map, and land use map of Turkey, respectively. R values were site-specifically corrected using DEM and climatic data. The topographical and hydrological effects on the soil loss were characterized by LS factor evaluated by the flow accumulation tool using DEM and watershed delineation techniques. From resulting soil loss map of the watershed, the magnitude of the soil erosion was estimated in terms of the different soil units and land uses and the most erosion-prone areas where irreversible soil losses occurred were reasonably located in the Kazan watershed. This could be very useful for deciding restoration practices to control the soil erosion of the sites to be severely influenced.     

优质稻的穗肥施用技术研究

优质稻田间穗肥试验表明,在叶色转赤的基础上,施穗肥一般以复合肥112.5~150.0 kg/hm2加氯化钾37.5 kg/km2为宜; 施穗肥比不施穗肥增产10.7%~15.5%。施穗肥的效果还与肥料中的氮钾比例有关,N∶K2O以1∶0.7~1.0较适宜。     

离子化有机污染物在沉积物和水相间的平衡分配计算

本文从热力学平衡原理出发,推导出离子化有机污染物在沉积物／水相间分配系数的理论计算模型,并以苯酚,邻氯酚,２,４－二氯酚、五氯酚和苯胺的吸附实验数据为例,计算了它们在中性分子和带电荷的离子形态下的分配系数Ｋｄ和Ｋｄｉ。以及总体分配系数Ｋｄｏ研究结果表明,离子化有机污染物在沉积物和分配行为不仅与该化学物的ｐＫａ和存在形态有关。而且还取决于环境介质的ｐＨ。     

苯甲酰苯胺类化合物溶解度和分配系数的测定及定量结构—性质相关研究

本文采用摇瓶法测定了１４各甲酰苯胺类化合物的溶解度及正辛醇／水分配系数,二者之间具有较好的相关性,应用线性溶剂化相关方法获得的相关方程,能更好地预测测苯甲酰苯胺类化合物的的水溶解度和正辛醇／水分配系数。     

Characterization of the toxic effects of cadmium and 3.5-dichlorophenol on nitrifying activity and mortality in biologically activated sludge systems—effect of low temperature

Background, aims, and scope  Sometimes, urban wastewaters convey a more or less significant part of toxic products from industries or the craft industry. Nitrifying activity can be affected by these substances, implying higher ammonia concentrations in the outlet effluent and contributing to toxicity for the aquatic environment. Moreover, the more stringently treated wastewater standards now require a reliable treatment for nitrogen. One of the key issues is the identification of the inhibition behavior of nitrifying bacteria facing a toxic substance. This new understanding could then finally be integrated into models in order to represent and to optimize wastewater treatment plants (WWTP) operation in cases involving ‘toxic scenarios’. Materials and methods  The toxic substances studied in this work, cadmium and 3.5-dichlorophenol (3.5-DCP), are representative of chemical substances commonly found in municipal sewage and industrial effluents and symbolize two different contaminant groups. The effects of Cd and 3.5-DCP on nitrification kinetics have been investigated using respirometry techniques. Results  IC50 values determination gives concentrations of 3.1 mg/L for 3.5-DCP and 45.8 mg/L for Cd at 21 ± 1°C. The variation to low temperature seems to have no real effect on IC50 for DCP, but induces a decrease of cadmium IC50 to 27.5 mg/L at 14°C. Finally, specific respirometric tests have been carried out in order to determine the potential effect of these toxic substances on the nitrifying decay rate b _a . No significant effect has been noticed for Cd, whereas the presence of 3.5-DCP (at IC50 concentration) induced a dramatic increase of b _a at 20°C. The same behavior has been confirmed by experiments performed in winter periods with a sludge temperature around 12°C. Discussion  The target substances have different modes of action on activity and mortality, notably due to the abilities of the contaminant to be precipitated, accumulated, or even to be progressively degraded. Studies realized at low temperature confirmed this assumption, and put in evidence the effect of temperature on toxic substances capable of being biosorbed. However, the change in the sludge sample characteristics can be pointed out as a problem in the investigation of the temperature effect on nitrification inhibition, as biosorption, bioaccumulation, and predation are directly linked to the sludge characteristics (VSS concentration, temperature) and the plant operating conditions (loading rates, sludge age, etc.). Conclusions  This work brings new understandings concerning the action mode of these specific contaminants on nitrifying bacteria and, in particular, on the role of temperature. The experiments lead to the determination of the IC50 values for both toxic substances on biological nitrification. The inhibition mechanisms of Cd and 3.5-DCP on nitrifying activity have been simply represented by a non-competitive inhibition model. Recommendations and perspectives  Other experiments carried out in a continuous lab-scale pilot plant should be done with a proper control of the operating conditions and of the sludge characteristics in order to better understand the mechanisms of nitrification inhibition for each contaminant. Finally, these first results show that toxic substances can have an effect on the growth rate but also on the decay rate, depending on the characteristics of the toxic substance and the sludge. This eventual double effect would imply different strategies of WWTP operation according to the behavior of the contaminant on the bacteria.     

Pb/Zn冶炼废渣中重金属的生物浸出-盐浸处理

利用中温嗜热菌对某铅锌冶炼废渣进行生物浸出盐浸处理研究,并根据国家固体废物浸出毒性方法(HJ/T299-2007)对盐浸后余渣进行毒性分析。研究结果表明,在pH 1.5、温度65℃、矿浆浓度5%的优化条件下生物浸出3 d后,废渣中Cu、In、Ga和Zn的浸出率分别达到了91.5%、91.8%、84.9%和93.4%;盐浸生物浸出渣,其浸出液中Ag、Pb浓度分别为7.6和247.5 mg/L,可从废渣中有效回收Cu、In、Ga、Zn、Ag和Pb。生物浸出盐浸处理后余渣约为原渣量的70%;毒性分析浸出液中重金属元素Ag、As、Cd、Cu、Pb和Zn浓度分别为2～3.5、2～3、0.3～0.5、30～50、2～4、20～60 mg/L,低于国家危险废物鉴别标准(GB5085.3-2007)。根据试验结果,提出了针对冶炼废渣资源化、减量化、无害化的生物浸出盐浸联用工艺。