山仔水库周边乡镇生态质量未确知测度评价

通过建立未确知模型,结合层次分析法确定权重,对福州由仔水库周边有人类聚居点的小沧乡、潘度乡、飞竹乡、霍口乡和日溪乡的生态环境质量做出了评价。得出了它们的生态环境质量均为四级,属较差水平。而在积分上,霍口乡的环境质量最好,潘度乡最差。     

台风湍流积分尺度与脉动风速谱——基于实测数据的分析

基于4个台风过程中的长时间序列风速、风方向观测数据，分析研究了近地台风的湍流积分尺度和脉动风速谱等脉动特性。介绍了湍流积分尺度的几种常见的计算方法，基于实测台风数据，分析研究了台风过程中湍流积分尺度的变化以及不同计算方法的稳定性。根据实测数据计算了纵向脉动风速谱，并与Von-Karman谱、Davenport谱、Simiu谱和Harris谱等经验谱进行了比较，给出了最适合描述台风纵向脉动风速谱的经验谱。还计算了横向脉动风速功率谱，并与基于各向同性湍流理论推导出的水平横向脉动风速谱进行了对比。     

水泥土搅拌桩的桩径分析

针对搅拌桩施工会引起周围土体的位移及产生很高的超静孔隙水压力的工程现象,首先分析了搅拌桩施工中固化剂的注入体积与膨胀压力、成桩直径的关系。结果表明,5%~10%的注入浆液的体积可以对周围土体产生1.8~3.0倍不排水抗剪强度的膨胀压力,成桩直径比搅拌叶片的名义直径大5%~10%。然后量测室内模型桩、现场搅拌桩的成桩直径,分析了注入浆液的体积与成桩直径的关系。结果表明,对于深度不太大的水泥土搅拌桩,有约45%的注入体积会通过上浮隆起的土体损失掉;大约5%的注入体积通过劈裂裂缝渗入到周围土体中;大约50%的注入体积会转化为成桩直径,使桩体膨胀5%~10%,即实测桩径比搅拌叶片的名义直径大5%~10%。     

30MHz-1000MHz显示器辐射骚扰测试及其不确定度评定

本文以显示器辐射骚扰测试为例对10米半电波暗室的辐射骚扰试验进行不确定度评定。并与相应标准进行比较，确认该辐射测试系统的测量结果是可信的。     

Hydromorphological and socio-cultural assessment of urban rivers to promote nature-based solutions in Jarabacoa,Dominican Republic

In Latin America and the Caribbean, river restoration projects are increasing, but many lack strategic planning and monitoring. We tested the applicability of a rapid visual social–ecological stream assessment method for restoration planning, complemented by a citizen survey on perceptions and uses of blue and green infrastructure. We applied the method at three urban streams in Jarabacoa (Dominican Republic) to identify and prioritize preferred areas for nature-based solutions. The method provides spatially explicit information for strategic river restoration planning, and its efficiency makes it suitable for use in data-poor contexts. It identifies well-preserved, moderately altered, and critically impaired areas regarding their hydromorphological and socio-cultural conditions, as well as demands on green and blue infrastructure. The transferability of the method can be improved by defining reference states for assessing the hydromorphology of tropical rivers, refining socio-cultural parameters to better address river services and widespread urban challenges, and balancing trade-offs between ecological and social restoration goals.Supplementary InformationThe online version contains supplementary material available at 10.1007/s13280-021-01565-3.     

应用地磁场的弹体飞行姿态测量方法研究

常规弹药的简易制导化是常规弹药改造的一个重要途径,是目前研究的热点之一,可以在低成本下大大提高常规弹药的精度,弹道修正弹是其中的一个重要发展方向,而弹体姿态实时测量是其中的一项关键技术。介绍了弹体姿态测量中基于地磁场的姿态测量方法,将其分为组合姿态测量和单矢量测量,并对测量方法做出了分析,阐述了应用地磁场的姿态测量的重要意义。     

环境地表γ计量率、工频电磁场和射频电场监测实验结果对比分析研究

本文通过两实验室针对环境地表γ计量率、工频电磁场和射频电场仪器对比实验,并对结果进行了统计检验。分析结果表明,两者监测数据无显著差异。     

Warm forming die design,Part II: Parting surface temperature response characterization of a novel thermal finite element modeling code

The majority of the research activities in the area of warm forming are concentrated on demonstrating or simulating the improved formability associated with forming lightweight materials such as aluminum alloys at elevated temperatures. However, the ability to design the proper thermal management system within the forming tool is a critical aspect to delivering this technology as a viable, stable production alternative to traditional stamping. This work begins to address the thermal stability issues of this process by examining the impact of process cycle time on the parting surface temperature response. Cycle times of 10, 15, 30, and 300 s were evaluated using a reciprocating surface and a self-heated experimental block of 1020 steel fitted with resistance cartridge heaters. The presented results indicate that cycle time does not significantly impact the steady-state temperature response at the parting surface for a well-insulated die that has proper thermal management. Parting surface experimental results were compared to values obtained numerically and through the use of the novel thermal finite element analysis software PASSAGE/Forming^®.     

液氮泡沫发生器内流动特性研究

低温液氮与泡沫混合液直接接触产生氮气泡沫是一种新型的掺混形式,利用液氮高汽化比的特点,搭建液氮泡沫可视化实验装置,进行氮气-水两相流及液氮泡沫流动特性的研究。结果表明,液氮相变产生大量氮气,其与泡沫液混合产生泡沫,温度有所回升,最终趋于泡沫混合液温度;管路沿程压降较小;液氮射流破碎及流动过程可分为6个区域:低温液氮区、向上循环翻滚区、滞留区、泡沫与泡沫混合液混合区、致密泡沫区、泡沫混合液区。流体向下游流动过程中持续发泡;为防止管路结冰,需合理控制泡沫混合液与液氮流量。     

时间因素对钻屑瓦斯解吸指标K1值测定的影响分析

针对时间因素对钻屑瓦斯解吸指标K1测定结果的影响,采用恒温瓦斯放散试验深入分析钻屑瓦斯解吸指标K1测定理论的准确性,总结因时间因素导致K1值测定误差所带来的现场问题。研究结果表明:K1值的测定误差与时间关系密切,测定启动时间越晚,误差越大;测定启动时间由第1 min延后至第2 min,绝对误差和相对误差最大值分别增加0.081 cm3/(g·min1/2)和2.20%;高瓦斯压力条件矿井或煤层的局部高瓦斯压力区域、构造煤发育区的钻屑瓦斯解吸指标K1值测定结果偏低,测定误差偏大。研究结果可为煤与瓦斯突出预测水平的提升提供技术支撑。