生物过滤塔净化甲醛废气的动力学研究

选用榛子壳作为反应器的填料,利用沈阳北部污水处理厂的活性污泥对填料进行挂膜,由低到高通入甲醛气体进行驯化。在系统稳定后进行了生物过滤塔净化甲醛气体的实验研究,并建立了生物过滤塔降解甲醛气体的动力学模型。结果表明,入口气体浓度在低于25mg/m3时,甲醛废气的净化效率可保持在97％以上,超过此浓度值时,效率明显下降。随着进口气体流量的增加,净化率逐渐下降,由入口流量为0．2m3／h时的97．25％下降到入口流量为0．8m弧时的57．2％。根据现有动力学模型及本实验得出数据所建立的生物过滤塔净化甲醛气体的动力学模型,可以较好地模拟系统处理甲醛废气的实验结果,验证了模型的正确性。     

基于DEA的上海市非中心城区工业生态效率研究

运用数据包络分析（DataEnvelopmentanalysis,DEA）的方法,从环境污染和资源消耗两个方面,建立了工业生态效率评价的指标体系,评价了2008年上海市非中心城区各区县的工业生态效率。结果表明,松江区处于上海市工业生态效率的前沿面,9个区县中有2／3区县的工业生态效率优于上海市平均水平。其中,崇明、嘉定和青浦处于规模报酬递增阶段,奉贤、闵行、浦东、金山、宝山则处于规模报酬递减阶段。最后,基于C2R模型对各区县的投入产出情况进行了优化调整,认为削减SO2的排放量和减少能源的消耗应是各区县提高工业生态效率的关键。     

气象条件对上甸子地区气溶胶散射特征的影响

利用北京地区上甸子站气溶胶散射系数、PM2.5质量浓度和气象要素1 a的观测资料,研究不同天气条件下上甸子地区散射系数的变化特征,并讨论了气象条件对散射系数的影响.结果表明,散射系数在雾霾天最高608.4 Mm-1,其次为雾天500.6 Mm-1和霾天423.7 Mm-1,是一般天气散射系数的6.4～9.2倍.在各类天...     

我国核电发展现状浅析

核电作为一种安全的清洁能源,对于优化能源结构、减少环境污染、具有重要意义。本文介绍了我国核电的现状,从安全性、环保性、经济性几方面对核电进行分析比较,说明积极推进核电发展是我国未来电力发展的选择。     

非离子表面活性剂对污泥调理脱水效果的影响

现有污泥脱水技术仅使污泥含水率降到80%左右,难以满足日益严格的污泥处置要求.以污泥比阻（SRF）、脱水率为考察指标,比较了两大类非离子型表面活性剂（辛基酚聚氧乙烯醚OPEO型和烷基糖苷APG）对剩余污泥的脱水效果,并对原泥及调理后污泥进行了显微观察.结果表明,非离子表面活性剂可使污泥絮体粒径变小,不规则程度降低,改善了污泥的脱水性能,而且烷基糖苷APG脱水效果优于OPEO型.APG投加量为0.05%干固体时,污泥比阻即可降低到原泥的42%,脱水率可达到93%.以烷基糖苷APG为调理剂进行板框脱水实验,结果表明,当APG投加量为0.05%干固体时,脱水泥饼含水率比原泥脱水泥饼含水率低约10%,脱水率可达到97%.本研究为APG应用于污泥脱水,改善污泥脱水性能提供一些参考.     

微压流化式复合生物反应器处理含酚废水效能的研究

通过连续动态试验,对新型微压流化式复合生物反应器(MP-FHBR)处理模拟苯酚废水的效能进行研究.结果表明,MP-FHBR的COD容积负荷可达4.86kg/(m3·d)、苯酚容积负荷可达1.96kg/(m3·d),出水COD低于200mg/L、出水苯酚浓度低于1mg/L,COD和苯酚去除率分别达到90%和99%以上.当苯酚容积负荷达到2.04kg/(m3·d),苯酚在反应器中逐渐累积,反应器内微生物的TTC-比脱氢酶活性下降.当MP-FHBR进水苯酚浓度为800mg/L时,最佳水力停留时间为9～10h.水力负荷对反应器沉淀池的泥水分离效果影响较大,限制了反应器的进水量,所以MP-FHBR主要适用于处理较高浓度的含酚废水.     

Oxidation inhibition of sulfite in dual alkali FGD system

A laboratory-scale well-mixed thermostatic reactor with continuously blasting air was used to investigate the oxidation inhibition of sulfite in dual alkali flue gas desulfurization （FGD） system. The effects of operating parameters such as pH value and catalyst concentration on the oxidation were studied. Sodium thiosulfate was used in the system, and was found that it significantly inhabited the sulfite oxidation. In the absence of catalyst, sodium thiosulfate at 12.67 mmol/L had an inhibition efficiency of approximately 98%. While in the presence of catalyst, sodium thiosulfate at 26.72 mmol/L had an inhibition efficiency less than 85.0%. The oxidation reaction order of sulfite in the sodium thiosulfate was determined to be -1.90 and 4）.55 in the absence and presence of the catalyst, respectively. Apparent activation energy of oxidation inhibition was calculated to be 53.9 kJ/mol. Pilot tests showed that the consumption rate of thiosulfate agreed well with the laboratory-scale experimental results.     

企业风险管理与经营效率：来自中国保险业的经验证据

本文从风险管理的视角对企业效率评估的数据包络分析技术进行了改进,探讨了风险管理与经营效率的内在关联,并以中国保险业为例,对1999年以来企业真实的经营效率水平进行了评估。结果表明：企业内部的风险管理能力对其经营效率水平的提升具有明显的影响,而且这种影响力正在逐渐加强。不考虑企业内部的风险管理水平将直接导致其经营效率的测算结果出现低估,2002年以后这种低估的程度越发明显,这可归因于同期保险企业开始逐渐重视提高自身的风险管理能力。以上结论也为企业如何在管控风险的同时提升经营效率水平提供了有价值的指导。     

Sustainability issues in sheet metal forming processes: an overview

Environmental sustainability in manufacturing is nowadays an urgent and remarkable issue and the main concerns are related to more efficient use of materials and energy.In sheet metal forming processes there is still a lack of knowledge in this field mainly due to the need of a proper modelling of sustainability issues and factors to be taken into account. The aim of this paper is mainly to underline the state of the art from a forming point of view about the sustainability contributions offered in any phase of a product life cycle. Actually, a lack in terms of comprehensive contributions is present in the technical literature, thus, the authors try to give a sort of holistic vision aimed to provide basic guidelines in order to help in identifying the possible solutions with regard to all the phases of a forming product life cycle. The main attention was paid to sheet metal forming technologies. The paper gives an overview of the main topics concerning sheet metal forming problems related to energy and resource efficiency with the aim to stress the principal contributions which may derive from such processes to environmental performances of manufacturing.     

The potential for improvements in energy efficiency and CO2 emissions in the EU27 cement industry and the relationship with the capital budgeting decision criteria

This paper performs a cost-effectiveness analysis of some of the best available technologies (BAT) that can contribute to decreasing the energy consumption and CO₂ emissions in the European Union’s (EU27) cement industry. Several capital budgeting decision criteria have been used (the payback period, the net present value and the internal rate of return) to study whether or not an investment should be considered worthwhile. The results show that, independent of the capital budgeting decision criteria used, the number of cost-effective retrofitting possibilities available is large compared to the rate of improvements that the industry undertakes annually. This shows the insensitivity of the industry to financial criteria when it comes to making their investment decisions. The possible thermal energy improvement in the clinker production, if all these BATs were implemented, has been quantified to be around 10%. This achievement would place the cement industry in the upper bound of the benchmark range for clinker manufacture. However considering the delays observed nowadays in terms of diffusion of BATs in the cement industry, it requires a conducive policy environment that combines support for both technology development and to their deployment.