Axi-symmetric simulation of soil vapor extraction influenced by soil fracturing

Fracturing, either pneumatic or hydraulic, is a method to improve the performance of soil vapor extraction (SVE) in relatively low permeability soils (< 10(-5) cm/s). A two-dimensional model is presented to simulate trichloroethylene (TCE) soil vapor extraction modified by fracturing. Flow and transport is modeled using mobile macropore and micropore networks, which also have been identified in the literature as dual porosity, dual permeability, or heterogeneous flow models. In this model, fluids can flow in both the macropore and micropore networks. This represents a more general model compared to immobile micropore, mobile macropore models presented thus far in the literature for vapor flow and transport in two dimensions. The model considers pressure- and concentration-driven exchange between the macropore and micropore networks, concentration-driven exchange between the gas and sorbed phases within each network, and equilibrium exchange between the gas and water and a sorbed phase within each network. The parameters employed in an example simulation are based on field measurements made at a fractured site. Considered in the simulations were the influence of the volume percentage of fractures, the length of fractures, the relative location of the water table, and the influence of pulsed pumping. For these simulations, internetwork concentration-driven exchange most significantly affected mass removal. The volume percentage of fractures more significantly influence flow and mass removal than the length of fractures. The depth of the water table below the contamination plume only significantly influenced flow and mass removal when the water table was within 60 cm of the bottom of the contaminated soil in the vadose zone for the parameters considered in this study. Pulsed pumping was not found to increase the amount of mass removed in this study.     

Thermal runaway reaction for highly exothermic material in safe storage temperature

Highly exothermic materials have caused many serious accidents involving storage and transportation, due to being thermally reactive. The safe storage and management of these materials is still a critical problem in many countries. Our aim was to study the thermal hazard of thermal reactive materials, such as a propellant, by employing differential scanning calorimetry (DSC) non-isothermal tests and isothermal tests, and then comparing the kinetic parameters by isothermal and non-isothermal of kinetics. The chosen approach was to obtain reliable thermal decomposition by a safe and effective method, which acquired the kinetic and safety parameters of storage conditions that could be applied as highly exothermic materials' reduction of loss prevention and energy potential for safer design during storage transport and processing operations.     

自然老化对FOX-7基双元混合物相容性的影响

目的 掌握自然老化如何影响1,1-二氨基-2,2-二硝基乙烷(FOX-7)基双元混合物的相容性,揭示老化过程对其相容性的潜在影响。方法 采用热分析技术(差示扫描量热法,DSC)和非热分析技术(傅里叶变换红外光谱,FTIR),对老化前后FOX-7基双元混合物的热分解特性和分子结构特征进行评估。利用DSC测得混合物和单质FOX-7的DSC初始分解峰温,对FOX-7与8种含能材料和4种惰性材料的相容性进行评估,再结合FTIR的测试结果辅助说明混合物分子结构的变化。结果 DSC热流曲线显示,除FOX-7/RDX混合物外,其他研究对象在老化前后均展现出良好的相容性。然而,以FOX-7/CL-20为代表的混合物在老化后的最大放热峰温出现明显变化,表明老化对这些混合物的相容性产生了影响。在FTIR光谱分析中观察到的官能团变化进一步表明,FOX-7与RDX、CL-20、AP、HTPB、DOS或WAX等组成的双元体系在老化过程中发生了化学反应。结论 本研究的发现对理解和评估老化过程对FOX-7基双元混合物相容性的影响具有重要意义,可用于指导FOX-7基含能材料长期储存和使用中的安全设计。     

包套轧制复合法制备TA1/LY12复合板

对5座高山电视塔在自然环境下金属腐蚀与防护进行了调查和分析研究，寻求其规律性，以便在今后建设中有针对性地改进抗蚀措施，提高并延长其结构使用寿命，更好地为广播电视宣传服务。     

实用的地面清扫除尘系统

介绍了一种实用的地面清扫除尘系统,投资小,占地少,效果好,很好地解决了冶金、煤炭等行业原料转运除尘的污染遗留问题。     

An analysis of variables influencing the material composition of automobiles

The use of materials is studied broadly, because of the environmental problems related to extraction, production, consumption and waste treatment. The use and substitution of materials in products is therefore a relevant issue for environmental policy making. Studies have been done to describe the material flow or to measure the impact of materials or products on the environment. However, these studies do not often consider economic, substitution and dynamic aspects of material flows. Other studies on material flows analyse the relationship between the use of materials and economic growth, but they do not consider substitution between materials. For environmental policy making economic, technological and environmental aspects of the use of materials need to be considered. Especially, substitution of materials is important. In various countries material and product policies are imposed on a variety of materials and products. For evaluation of these policies their environmental and economic effects need to be examined in detail. This study aims to analyse the economic and technological factors influencing the use of materials and the substitution between different materials dynamically. The goal is to obtain an insight in the effect that material levies may have on the use and substitution of materials. The statistical analysis is performed on a specific product-group because decisions on the use of materials are taken on a product-level. The case study is performed on automobiles. The results show that the material use is largely an autonomous development. The price of aluminium has a positive, significant effect on the use of that material. The price of plastics has a positive, but not significant effect on the use of plastics. Reasons may be that the costs of a raw material are small relative to the processing costs, and that the production process can only be changed slowly. Other factors, like competitiveness and consumers' tastes, may be more important for substitution. This implies that levies or subsidies on certain materials is not a promising policy to change the use of materials. Besides time, there are two other factors that have a positive and significant relationship with the use of aluminium and plastics: the fuel efficiency, which is the distance driven divided by the energy used; and, the road tax, which depends on the weight of a car. However, these effects are caused by their positive relationship with time. The main conclusion of the case study is that imposing a levy on materials may not have the desired or expected effect of reduction in material use.     

高温烟气除尘用纤维滤料研究进展

本文对上程上高温烟气来源进行了分类,对当前高温烟气过滤的核心技术的耐高温过滤材料的使用现状进行了分析,对高温玄武岩纤维过滤材料进行了重点探讨与展望,指出玄武岩纤维滤材当前在高温烟气过滤行业中急需解决的问题和产业科技成果转化方向。     

重庆工业废渣建材资源化状况及对策探讨

在对重庆市工业废渣进行广泛调查及掌握尽可能详细的资料的基础上 ,针对重庆市工业废渣的特点 ,提出了一些利用工业废渣的设想。     

回填材料对土壤原位热传导修复的影响及数值模拟

原位热传导修复技术是一种有机污染土壤高效修复手段。由于施工过程中加热井与土壤间会存在一定空隙,关于是否使用回填材料以及回填材料的选取原则,尚未有明确的指导意见。利用实验和数值模拟方法,对原位热传导修复过程中回填材料的影响进行了研究,分析了不同加热温度(200、400 、600 、800 ℃)、回填材料(空气、原土)、回填厚度(40、100、150 mm)对传热的影响。结果表明,基于实验数据所建立的原位热传导数值预测模型是可靠的,模拟计算值与实测值最小平均相对误差为6.69%;当加热温度高于450 ℃时,无回填料时传热效果更好;当加热温度小于300 ℃时,用土壤回填较好;在300~450 ℃时,有无回填料传热效果相差不明显;原位热传导修复技术工程在应用过程中,回填材料厚度100 mm时传热效果最佳。本研究结果可为污染土壤原位热传导修复的工程实践提供参考。     

The velocity of DNAPL fingering in water-saturated porous media: laboratory experiments and a mobile–immobile–zone model

Dense nonaqueous phase liquids (DNAPLs) are immiscible with water and can give rise to highly fingered fluid distributions when infiltrating through water-saturated porous media. In this paper, a conceptual mobile–immobile–zone (MIZ) model is presented to describe the structure of a DNAPL finger in water-saturated porous media and the velocity of finger propagation. A finger is composed of a finger body and a tip. The finger body has a mobile core and an immobile sheath. All the DNAPL within the tip of a finger is mobile. Lab experiments utilizing image analyses of a DNAPL (PCE) penetrating into water-saturated homogeneous glass beads were carried out in a two-dimensional transparent chamber. The results show that the fingers elongated almost linearly with time. The fingers did not grow laterally after the tip of the finger had passed. The average finger diameters were between 3.9 and 5.4 mm for PCE propagation in water-saturated glass bead porous media with mean particle diameters from 0.32 to 1.36 mm. The estimated mobile core diameters were 51–60% of the average finger diameters.