絮凝剂用壳聚糖的中试生产研究

在实验室制备絮凝剂用壳聚糖的基础上,按工业化生产的要求对壳聚糖进行了中试生产研究.经正交试验确定了生产过程中脱钙、脱蛋白、脱乙酰等3步反应的最佳工艺参数. 由此中试工艺生产的壳聚糖的生产成本比国内同类产品下降了22%,生产周期缩短了66%,且主要性能指标均达到或超过国内外同类产品的水平.     

Laboratory investigation of Waelz slag stabilization

Electric Arc Furnace dusts are considered hazardous waste due to their high heavy metals content (zinc, lead, etc.). The Waelz process is one of the most efficient technologies, in terms of capacity and quality, able to recover nearly the 90% of zinc contained in such EAF dusts. Unfortunately, the resulting slag still has eco-compatibility problems, although its mechanical and chemical properties are suitable for civil engineering applications. Stabilization tests, by quartz addition, were performed on EAF dusts in a laboratory furnace. Temperature, treatment time and cooling rate were varied in order to define the best conditions for regulating the formation of a stable microstructure able to hinder the release of substances. Microstructural characterization was carried-out using SEM and XRD analysis. Leaching tests were performed according to EN 12457-2 standards and water analyses were performed using ICP-OES. The best chemical stability was achieved when dust powders were mixed with 20% of silica and water-cooled.     

THOR dummy chest deflection response in oblique and lateral far-side sled tests

Abstract

Objective: The focus of this study is side impact. Though occupant injury assessment and protection in nearside impacts has received considerable attention and safety standards have been promulgated, field studies show that a majority of far-side occupant injuries are focused on the head and thorax. The 50th percentile male Test Device for Human Occupant Restraint (THOR) has been used in oblique and lateral far-side impact sled tests, and regional body accelerations and forces and moments recorded by load cells have been previously reported. The aim of this study is to evaluate the chestband-based deflection responses from these tests.

Methods: The 3-point belt–restrained 50th percentile male THOR dummy was seated upright in a buck consisting of a rigid flat seat, simulated center console, dashboard, far-side side door structure, and armrest. It was designed to conduct pure lateral and oblique impacts. The center console, dashboard, simulated door structure, and armrest were covered with energy-absorbing materials. A center-mounted airbag was mounted to the right side of the seat. Two 59-gage chestbands were routed on the circumference of the thorax, with the upper and lower chestbands at the level of the third and sixth ribs, respectively, following the rib geometry. Oblique and pure lateral far-side impact tests with and without airbags were conducted at 8.3 m/s. Maximum chest deflections were computed by processing temporal contours using custom software and 3 methods: Procedures paralleling human cadaver studies, using the actual anchor point location and actual alignment of the InfraRed Telescoping Rods for the Assessment of Chest Compression (IR-TRACC) in the dummy on each aspect—that is, right or left,—and using the same anchor location of the internal sensor but determining the location of the peak chest deflection on the contour confined to the aspect of the sensor; these were termed the SD, ID, and TD metrics, respectively.

Results: All deformation contours at the upper and lower thorax levels and associated peak deflections are given for all tests. Briefly, the ID metrics were the lowest in magnitude for both pure lateral and oblique modes, regardless of the presence or absence of an airbag. This was followed by the TD metric, and the SD metric produced the greatest deflections.

Conclusion: The chestbands provide a unique opportunity to compute peak deflections that parallel current IR-TRACC-type deflections and allow computation of peak deflections independent of the initial point of attachment to the rib. The differing locations of the peak deflection vectors along the rib contours for different test conditions suggest that a priori attachment is less effective. Further, varying magnitudes of the differences between ID and TD metrics underscore the difficulty in extrapolating ID outputs under different conditions: Pure lateral versus oblique, airbag presence, and thoracic levels. Deflection measurements should, therefore, not be limited to an instrument that can only track from a fixed point. For improved predictions, these results suggest the need to investigate alternative techniques, such as optical methods to improve chest deflection measurements for far-side occupant injury assessment and mitigation.     

不同警告方式下驾驶人应激反应能力模拟试验研究

为研究在道路突发危险场景下先进驾驶辅助系统的不同警告方式对驾驶人应激反应能力的影响，利用自主开发的驾驶人应激反应能力测试软件，以计算机模拟与驾驶模拟器为试验平台，以实际驾驶视频为试验场景，选取操作准确率和反应时间为测试指标，分析不同警告方式下驾驶人的应激反应能力。研究结果表明:视觉警告可有效缩短应激反应时间；视听觉组合警告中，视觉警告占主导作用，听觉警告起辅助作用；在真实场景视频试验环境下，驾驶模拟器模拟试验的操作效果优于计算机模拟试验。     

可燃制冷剂空调用开关元件点燃危险及防爆试验分析

随着全球范围对环境问题的日益重视,R290,R32等新型制冷剂因优良的环保性能和节能效果被广泛应用于空调行业,但其属于IIA级爆炸性气体,为了进一步分析其运行过程中的防爆安全性能。通过文献数据和测试分析,可燃制冷剂空调电气元件的点燃源主要来自其工作过程中产生的电气火花。其中空调开关元件最容易产生电火花、电弧,且通过试验验证这些火花或电弧能点爆（6.5±0.5）%乙烯/空气混合物。综合IEC 60335-2-40,GB 4706.32标准要求和空调开关元件的结构特征,分析确定其应符合“nC”型防爆技术要求,并能通过“nC”型爆炸试验。针对开关元件结构尺寸小、存在爆炸试验中爆炸性混合气体多次置换和负载通、断电操作的难点问题,提出一套合理可行的爆炸试验实施方案,并通过测试应用得到验证。     

顶板含水层防水试验的钻孔单位涌水量计算方法

为了实现利用井下放水试验获取顶板含水层的钻孔单位涌水量,采用抽水试验中的地下水动力学计算公式,结合观测孔的水位降深,给出了放水孔水位降深的计算方法;利用观测孔水位降深和观测孔与放水孔之间距离的对数曲线图,提出了放水孔水位降深的图解法;对于承压含水层,基于钻孔单位涌水量与含水层渗透系数之间的线性相关关系,可以通过含水层的渗透系数获取钻孔单位涌水量;通过实例分析,解析法和图解法计算得到的放水孔单位涌水量相近,结合现场放水试验情况,分析了放水孔单位涌水量的可靠性,并对3种方法的适用条件进行了讨论。研究结果表明:利用放水试验获取的放水孔单位涌水量符合实际情况,可以作为含水层富水性评价和矿井水文地质条件分析的依据。     

深水水下测试树球阀剪切连续油管性能分析

为研究不同工况、不同结构参数对于深水水下测试树球阀剪切连续油管性能的影响,采用有限元分析软件建立剪切分析模型,对不同工况下剪切过程进行数值模拟,并与试验对比验证分析模型的准确性;结果显示,有限元模型结果与试验结果相对偏差小于5%;油管剪切过程中会出现2个剪切力矩峰值,通过分析不同工况下2个峰值变化规律,发现油管承受拉力越大、球阀剪切速度越小、球阀外径越小剪切过程所需剪切力越小,剪切性能越好。研究结果表明:得到的剪切模型及不同工况下剪切力变化规律,可为水下测试树的设计选型及现场应用提供指导及参考意义。     

白眉蝮蛇毒精氨酸酯酶的急性、亚急性毒性实验

用小鼠和大鼠分别研究了白眉蝮蛇(Agkistrodon halys ussuriensis )蛇毒中精氨酸酯酶的急性毒性和亚急性毒性.腹腔和静脉给药小鼠急性毒性分别为半数致死量LD50,ip =5.73～6.68 U/kg, LD50,iv=4.12～4.76 U/kg ;最大致死量LD100,ip=8.60 U/kg, LD100,iv=6.40 U/kg;最小致死量LDmin,ip =4.20 U/kg, LDmin,iv=3.10 U/kg .大鼠急性毒性结果分别为LD50,ip= 5.09～5.98 U/kg, LD50,iv=3.30～3.86 U/kg ; LD100,ip=7.80 U/kg, LD100,iv=5.50 U/kg; LDmin,ip=3.60 U/kg, LDmin,iv=2.70 U/kg.大鼠亚急性毒性实验结果为活动能力、生长率、进食量、死亡率等一般综合指标药物处理组和CK没有明显差别;血检、尿检等临床指标除谷丙转氨酶(GPT)高剂量药物处理组与CK有明显差异外(P<0.05),其它生化指标无显著差异(P>0.05);病理解剖和脏器系数指标,高剂量药物处理组肝脏明显肿大、空泡化,脏器系数也明显高于CK(P<0.05),其它脏器未见病变,脏器系数未见显著差异(P>0.05).从急性毒性和亚急性毒性方面考虑,纯精氨酸酯酶比现在临床应用的"蝮蛇清栓酶"(主要成分为精氨酸酯酶)毒性低. 表3 参11     

三价钇对紫露草的遗传毒性研究

用紫露草四分体微核试验法和紫露草雄蕊毛细胞突变法研究了稀土元素三价钇的遗传毒性．结果表明：Y3＋能引起紫露草四分体微核率显著升高，提示Y3＋是诱变剂或纺锤丝毒剂；Y3＋能引起雄蕊毛细胞突变率显著升高，进一步明确Y3＋是诱变剂．     

复合人工湿地对有机污染物的去除效果初步研究

研究了由不同植物配置(驯化和未驯化)的两组下行和上行植物床组成的复合人工湿地对生活污水的净化效果。结果表明,CODCr和BOD5的去除率达67.3%,68.1%,总氮(TN)的去除率为26.9%,总磷(TP)的去除主要发生在上行床,去除率为81.6%。环芳烃(PAHs)中苊(Ace)、荧蒽(Flu)、芘(Py)、苯并[a]蒽(BaA)、屈(Chr)、苯并[b]荧蒽(BbF)、苯并[a]芘(BaP)、茚并[1,2,3-cd]芘(InP)和苯并[g,h,i](BPR)经下行床后,去除率超过80%,上行床去除较少。驯化床和未驯化床对PAHs的去除效果差异不显著。邻苯二甲酸酯(PAEs)中邻苯二甲酸二乙酯(DEP)和邻苯二甲酸二异丁酯(DiBP)经驯化床后,质量浓度显著升高,经未驯化床后邻苯二甲酸二(2-乙基)己酯(DEHP)含量显著降低。蚕豆根尖微核实验表明,不同植物配置对微核率影响差异并不显著,毒害物质经下行床后大部分被去除。