脱硫石膏粒径分布与脱水性能实验研究

脱硫石膏粒径分布是影响脱硫石膏浆液脱水性能的重要因素之一,以干法、湿法筛分和研磨破碎获得不同粒径分布的脱硫石膏,在相同的过滤条件下,对不同粒径分布脱硫石膏浆液脱水性能进行了研究,实验结果表明,当脱硫石膏粒径d50大于50μm且（d90-d10）小于100μm,真空过滤最大真空度不低于0．098MPa,过滤时间不少于2．5min,滤饼厚度不超过20mm时,石膏滤饼含水率可以降低到12％以下（最低可达10％）;d50在17μm为脱硫石膏在相同的过滤条件下能够实现真空脱水干燥的转折点;d50和（d90-d10）共同影响石膏脱水性能,d50小于20μm时,仅表现为d50的影响。     

全工班呼吸性粉尘测定及防尘措施研究

针对呼吸性粉尘对矿井工人身体健康的危害,对煤矿综采工作面、综掘工作面、炮掘工作面等进行分工种个体性的全尘和呼尘监测,测定了各工作面粉尘(全尘和呼尘)的浓度、粉尘分散度和SiO2浓度。其结果表明:全工班呼吸性粉尘测定的方法更加真实可靠,更真实地反映了呼吸性粉尘对井下各操作工种的致病危害,测得的各工作面各工种的呼尘浓度均高于国家标准。通过数据的分析以及工人的建议,提出了一些新式的、有效的防尘措施来降低呼吸性粉尘对人体健康的危害。     

Extraction of labile metals from solid media by dilute hydrochloric acid

Extraction of labile metals from solid media is environmentally more meaningful than a total digestion. A variety of reagents have been introduced in the literature, but dilute HCl has received the greatest attention. We compare metal concentrations liberated by a dilute HCl leach with the sum of the 3-step optimized (standardized) BCR sequential extraction procedure. This is the first study to compare these procedures over a range of grain sizes. Road-deposited sediments from 10 sites in Honolulu were fractionated into six grain size classes. Aliquots of individual fractions were digested with dilute HCl, the 3-step BCR procedure (‘labile’), and a 4-acid (total) procedure. Results indicated that the weighted labile concentrations of Al, Cu, Fe, Mn, Ni, Pb and Zn were statistically greater than those from the dilute HCl leach. However, regression analysis indicated strong statistically significant relationships between the two partial extraction procedures for all metals. On a whole-sample basis, the toxicity classifications for anthropogenic-enhanced metals (Cu, Pb and Zn) were similar between extractions. Taken together, results suggest that the application of dilute HCl to solid media provides a rapid, cost-effective, and environmentally meaningful approach for contaminant monitoring.     

Nature of property rights and motivation for blue growth: An empirical evidence from the fisheries industry

If unauthorized resource use is prevented, managing marine resources by allocating property rights may match economic and environmental conservation incentives. However, because of the developing exploitation of marine resources and accompanying pollution, species' living conditions in Europe's waters are changing more quickly than before. By considering the roles of fisheries productivity, intellectual property rights, intellectual capital rights, market size, governance, and economic growth from 1990 to 2022, this paper aims to investigate the dynamic effect of property rights factors on the sustainability of the fisheries industry in 27 European countries. At higher quantiles, the findings showed a significant positive association between governance and fisheries sustainability adopting a new method, the MMQR with fixed effects, the Method of Moments Quantile Regression. In addition, in EU27 nations, the impact of intellectual property rights was favorable and statistically significant from the first to ninth quantiles. The findings show that the EU14 developed nations have more excellent governance and intellectual capital rights than the EU13 developing countries, significantly benefiting fisheries sustainability. In the same way that market size and economic growth condense fisheries sustainability in EU14 developed and EU13 developing countries, it has been discovered that intellectual property rights do the same across all quantiles, supporting the growth hypothesis for fisheries-producing countries. The findings specifically show that the beneficial solid impact of intellectual property rights, market size, and economic development on the sustainability of fisheries is more significant in EU13 developing nations than in EU14 developed countries. These results provide policymakers with helpful information for promoting property rights aspects in EU14 and EU13 nations via effective green technologies in the fisheries sector to meet sustainable development objectives.     

人工增雨（雪）效果评估方法探索

人工增雨（雪）常用的评估方法为统计检验和物理检验,统计检验需要大量试验样本,且随机化试验在我国难以实现,大量样本无从获得。物理检验目前主要是雷达观测演变状况和飞机直接观测云内微物理参数,由于技术和能力有限,这些方法都难以实现。为了在人工影响天气作业后尽快得出评估结果供政府及环境保护等部门参考,利用雨滴谱记录数据对一次人工增雪作业后的效果进行了评估,发现这些数据在没有常规降雪记录情况下具有一定的参考价值。从评估结果看,人工增雪作业后,降水强度有明显增大的趋势。     

Usage of polystyrene disposable food dishes in the lightweight concrete making

The increasing use and subsequent accumulation of polystyrene containers has triggered a substantial environmental problem. This study investigated using varied percentages of solid waste polystyrene disposable food dishes in the production of lightweight concrete samples with 350 kilograms per cubic meter (kg/m³) of cement and a density of 1,300 kg/m³. The polystyrene disposable dishes were ground into beads of 0–3 millimeters (mm) and 3–6 mm in size. First, the characteristics of Type II Portland cement, polystyrene, and aggregates were examined. The following characteristics of concrete using ASTM International and British Standards Institution standards were tested: slump, compressive strength, ability to resist chloride ion penetration, and resistance of concrete to rapid freezing and thawing cycles. Scanning electron microscopy (SEM) and energy dispersive X‐ray spectroscopy analytical techniques were also used. The slump of samples varied between 40 and 70 mm and was not dependent on either the polystyrene percentage or the size of the polystyrene beads in the concrete samples (p‐value > .05). The compressive strength of the concrete samples after 90 days of curing, and using different percentages of polystyrene, varied between 96 and 113 kilograms per square centimeter (kg/cm²). The resistance of the samples to the freezing and thawing cycle and chloride ion penetration were affected unfavorably by the presence of the polystyrene. The SEM technique indicated that concrete samples containing 15% and 25% polystyrene had denser crystals and less void than concrete samples with 40% and 55% polystyrene.     

Using Relative Risk to Compare the Effects of Aquatic Stressors at a Regional Scale

The regional-scale importance of an aquatic stressor depends both on its regional extent (i.e., how widespread it is) and on the severity of its effects in ecosystems where it is found. Sample surveys, such as those developed by the U.S. Environmental Protection Agency’s Environmental Monitoring and Assessment Program (EMAP), are designed to estimate and compare the extents, throughout a large region, of elevated conditions for various aquatic stressors. In this article, we propose relative risk as a complementary measure of the severity of each stressor’s effect on a response variable that characterizes aquatic ecological condition. Specifically, relative risk measures the strength of association between stressor and response variables that can be classified as either “good” (i.e., reference) or “poor” (i.e., different from reference). We present formulae for estimating relative risk and its confidence interval, adapted for the unequal sample inclusion probabilities employed in EMAP surveys. For a recent EMAP survey of streams in five Mid-Atlantic states, we estimated the relative extents of eight stressors as well as their relative risks to aquatic macroinvertebrate assemblages, with assemblage condition measured by an index of biotic integrity (IBI). For example, a measure of excess sedimentation had a relative risk of 1.60 for macroinvertebrate IBI, with the meaning that poor IBI conditions were 1.6 times more likely to be found in streams having poor conditions of sedimentation than in streams having good sedimentation conditions. We show how stressor extent and relative risk estimates, viewed together, offer a compact and comprehensive assessment of the relative importances of multiple stressors.     

Distribution and persistence of carbaryl in some terrestrial and aquatic components of a forest environment

Abstract

An oil‐based formulation of carbaryl (1‐naphthyl N‐methyl‐carbamate) (Sevin‐2‐Oil) was applied twice by a fixed‐wing aircraft at a dosage rate of 280 g of A.I./ha/application to a coniferous forest near Allardville, New Brunswick. The highest concentrations of the chemical in fir foliage, litter and forest soil 1 h after application were respectively 4.20, 1.21 and 0.59 ppm (fresh weight). The residues dissipated rapidly and the DT50 values obtained from the depletion curves were 2.3 d for foliage and 1.5 d for litter and soil samples. Very low levels (<0.1 ppm) of carbaryl persisted in foliage and litter beyond the 10 d sampling period. The maximum residue level found in stream water was 0.314 ppm and more than 50% of it had dissipated within 1 h. Low but detectable levels (0.001 ppm) of the chemical persisted in water until the end of the 10 d sampling period. Sediment samples contained a maximum level of 0.04 ppm, which dissipated below the detection limit within 5 h. Brook trout and slimy sculpins captured in the stream 1 d after the spray contained on average about 0.04 ppm of carbaryl and none of it was found in 3 d postspray samples.     

Production of radioactive particles for use in environmental studies

This paper presents an aerosol generation technique developed to produce dry aerosol particles of various sizes from aqueous solutions of salt. The technique was tested with sodium chloride, lithium carbonate and uranyl acetate at various aqueous concentrations which produced particles in the size range of 0.13-1.37 microm Mass Median Diameter (MMD). The generated aerosols were acceptably monodisperse with a geometric standard deviation of 1.4-2. Both MMD and Mass Median Aerodynamic Diameter (MMAD) increased significantly (p<0.001) with increased concentration of the salt in solution. The technique can also be used to generate aerosols of different chemical species. The results obtained indicate that the system is convenient for use with various aerosol-forming materials, with a stable particle size distribution being maintained for a long period of steady operation. The technique was successfully applied in wind tunnel studies to simulate the release of submicron radioactive particles and their interception by crops, grass and tree canopies. The relevance and application of the technique in other areas of environmental assessment studies is discussed.     

Entrainment mortality of Ichthyoplankton: Detectability and precision of estimates

The ability to detect and to develop a precise and accurate estimate of the entrainment mortality fraction is an important step in projecting power plant impacts on future fish population levels. Recent work indicates that these mortailities may be considerably less than 100% for some fish species in the early life stages. Point estimates of the entrainment mortality fraction have been developed based on probabilistic arguments, but the precision of these estimates has not been studied beyond the simple statistical test of the null hypothesis that no entrainment mortaility exists.The ability to detect entrainment mortality is explored as a function of the sample sizes (numbers of organisms collected) at the intake and discharge sampling stations of a power plant and of the proportion of organisms found alive in the intake samples (intake survival). Minimum detectable entrainment mortality, confidence interval width, and type II error (probability of accepting the null hypothesis of no entrainment mortality when there is mortality) are considered. Increasing sample size and/or decreasing sampling mortality will decrease the minimum detectable entrainment mortality, confidence interval width, and type II error for a given level of type I error.The results of this study are considered in the context of designing useful monitoring programs for determining the entrainment mortality fraction. Preliminary estimates of intake survival and the entrainment mortality fraction can be used to obtain estimates of the sample size needed for a specified level of confidence interval width or type II error. Final estimates of the intake survival and the entrainment mortality fraction can be used to determine the minimum detectable entrainment mortality and the type II error.