生物燃气制气供气装置选型计算

根据生物质热解及其干燥所需能量计算,选择一种生物质燃气制气供气装置作为生物燃油生产过程中用于生物质干燥和热载体加热的能量来源,对降低生物燃油规模化生产能耗和生产成本具有重要的研究实践价值和经济意义.     

考虑驾驶员反应时间的车辆碰撞预警模型

为了保证车辆在行驶过程中的安全性,提出了一种考虑驾驶员反应时间的车辆碰撞预警模型,改进了传统模型中驾驶员反应时间定值化的缺点。首先,依据车辆的制动过程分析了驾驶员反应时间对制动距离的影响。其次,设计驾驶员反应时间的模糊推理算法,选取驾龄、疲劳强度和应变能力3个主要因素作为评价指标来计算反应时间。最后,采用分等级的预警策略建立考虑驾驶员反应时间的碰撞预警模型,并通过Carsim-Matlab/Simulink联合仿真与传统模型进行对比分析。结果表明,设计的预警模型可以对不同类型的驾驶员进行差异化碰撞预警,在30 km/h和80 km/h两种车速下实际停车距离与理论值的最大误差为8%。     

DECLINING POTENTIOMETRIC LEVELS IN FORT WALTON BEACH AREA,FLORIDA1

ABSTRACT: The Fort Walton Beach area is presently faced with an excessive drawdown of the potentiometric level in the upper Floridan aquifer. Based on available data, the potentiometric level in the Floridan aquifer has dropped 162 feet since 1936. This declining potentiometric level can lead to problems and possible loss of the natural resource on a long-term basis. However, if corrective measures or programs for proper management of groundwater resources are undertaken at this time, the potential problems may be averted.     

THE EFFECT OF DATA INDEPENDENCE IN MODEL CALIBRATION AND MODEL TESTING1

ABSTRACT: With the increased use of models in hydrologic design, there is an immediate need for a comprehensive comparison of hydrologic models, especially those intended for use at ungaged locations (i.e., where measured data are either not available or inadequate for model calibration). But some past comparisons of hydrologic models have used the same data base for both calibration and testing of the different models or implied that the results of model calibration are indicative of the accuracy at ungaged locations. This practice was examined using both the regression equation approach to peak discharge estimation and a unit hydrograph model that was intended for use in urban areas. The results suggested that the lack of data independence in the calibration and testing of regression equations may lead to both biased results and misleading statements about prediction accuracy. Additionally, although split-sample testing is recognized as desirable, the split-samples should be selected using a systematic-random sampling scheme, rather than random sampling, because random sampling with small samples may lead to a testing sample that is not representative of the population. A systematic-random sampling technique should lead to more valid conclusions about model reliability. For models like a unit hydrograph model, which are more complex and for which calibration is a more involved process, data independence is not as critical because the data fitting error variation is not as dominant as the error variation due to the calibration process and the inability of the model structure to conform with data variability.     

Profitability of in-plant modifications in pollution control

This case study was developed in view of setting up a demonstration project on “revealing the profitability of clean technology in small-scale electroplating unit”. The research was conducted in a small-scale electroplating shop located in Bangkok. A set of simple in-plant control measures such as dragout recovery, spray rinsing technique and rinse water agitation were implemented. Quantitative data, obtained from the monitoring of wastewater before and after process modifications, have indicated a substantial reduction both in quantity and strength of wastewater generated. Water consumption was reduced by approx. 35% of total rinsing water, which is 19% of total process water consumption. Average metal concentrations in wastewater was reduced 73% for Cr-, 71% for Ni- and 54% for Cu-plating rinse water.     

Water Use by Thermoelectric Power Plants in the United States1

Abstract: Thermoelectric power generation is responsible for the largest annual volume of water withdrawals in the United States although it is only a distant third after irrigation and industrial sectors in consumptive use. The substantial water withdrawals by thermoelectric power plants can have significant impacts on local surface and ground water sources, especially in arid regions. However, there are few studies of the determinants of water use in thermoelectric generation. Analysis of thermoelectric water use data in existing steam thermoelectric power plants shows that there is wide variability in unitary thermoelectric water use (in cubic decimeters per 1 kWh) within and among different types of cooling systems. Multiple‐regression models of unit thermoelectric water use were developed to identify significant determinants of unit thermoelectric water use. The high variability of unit usage rates indicates that there is a significant potential for water conservation in existing thermoelectric power plants.     

Fitting a Gamma Distribution Over a Synthetic Unit Hydrograph1

ABSTRACT: Several methods for synthetic unit hydrographs are available in the literature. Most of these methods involve the hand fitting of a curve over a set of a few hydrograph points, which can sometimes be a subjective task. Besides, the user often finds it difficult or simply neglects to adjust the generated unit graph to a runoff volume of one unit (inch, cm, or mm). It is the purpose of this paper to present to the design hydrologist a simple method to fit a smooth gamma distribution over a single point specified by the unit hydrograph peak and the time to peak with a guaranteed unit depth of runoff.     

Illinois redesigns its ambient water quality monitoring network

Illinois has been operating an ambient water quality network of almost 600 stations for several years. In 1977 changes in program emphasis toward intensive monitoring, the need for improved procedures and quality control in monitoring operations, and the desire to create a single data base of all Illinois State monitoring data, resulted in a redesign of the ambient monitoring program.A unique cooperative program between the Illinois Environmental Protection Agency and the US Geological Survey provides for their monitoring a portion of the network. The Survey provides flow data at most network stations as well as extensive manpower training, equipment, data processing, and program quality control. Informal agreements with other agencies have permitted a great reduction in the monitoring effort required by the Illinois Environmental Protection Agency.     

加氢装置分液罐泄漏失效原因分析

针对某石油化工公司加氢装置中变气第一分液罐底部环焊缝周围产生多处裂纹而发生泄漏的事故,通过对该压力容器使用工作环境的工况调查、设备泄漏部位裂纹宏观分析、裂纹形态及断口理化金相分析、材质化学成分检测、焊接接头金相组织分析、材料拉伸力学性能试验和硬度测试等手段,综合分析裂纹产生的原因,得出初步结论,并提出改进建议.     

长输管道穿越河流的环境影响及对策浅析

由于近年来施工机械及河流穿越技术的不断进步,对于各地区不同的气候和地质条件,各类长输管道穿越河流等特殊地段的施工方式日趋多样化,除工程成本及管线安全性外,也更多的考虑到了工程施工给周边环境带来的不良影响,如何在穿越地段选择合理的施工方式和污染防治措施已成为工程设计阶段的重要关注点,本文主要针对目前中国油气长输管道穿越河流段普遍采用的施工方式进行环境影响分析,并在此基础上提出相应污染防治措施。