Full-scale blending treatment of fresh MSWI leachate with municipal wastewater in a wastewater treatment plant

Fresh leachate, generated in municipal solid waste incineration (MSWI) plants, contains various pollutants with extremely high strength organics, which usually requires expensive and complex treatment processes. This study investigated the feasibility of blending treatment of MSWI leachate with municipal wastewater. Fresh MSWI leachate was pretreated by coagulation–flocculation with FeCl₃ 2 g/L and CaO 25 g/L, plate-and-frame filter press, followed by ammonia stripping at pH above 12. After that, blending treatment was carried out in a full-scale municipal wastewater treatment plant (WWTP) for approximately 3 months. Different operational modes consisting of different pretreated leachate and methanol addition levels were tested, and their performances were evaluated. Results showed that throughout the experimental period, monitored parameters in the WWTP effluent, including COD (<60 mg/L), BOD₅ (<20 mg/L), ammonium (<8 mg/L), phosphorus (<1.5 mg/L) and heavy metals, generally complied with the Chinese sewage discharged standard. Under the experimental conditions, a certain amount of methanol was needed to fulfill TN removal. An estimation of the operation cost revealed that the expenditure of blending treatment was much lower than the total costs of respective treatment of MSWI leachate and municipal wastewater. The outcomes indicated that blending treatment could not only improve the treatability of the MSWI leachate, but also reduce the treatment cost of the two different wastewaters.     

菌渣中阿维菌素残留检测方法及其无害化工艺研究

文章建立了简单、快速的阿维菌素菌渣中阿维菌素残留量高校液相色谱检测方法以及利用水热法处理阿维菌素菌渣。采用固相萃取-高效液相色谱检测方法测定阿维菌素菌渣中阿维菌素残留量,提取剂为乙腈/水=4/1(V/V),采用HLB固相萃取柱进行净化。加标回收率90.3%~107.3%,相对标准偏差(RSD)为3.00%~5.69%,阿维2菌素标准曲线线性相关系数R~2=0.999 6,线性范围为1.0~1 000 mg/L。利用正交实验,水热法处理阿维菌素菌渣,在190℃的温度下处理2 h后,菌渣中阿维菌素残留量由991.30降至0.84 mg/kg,去除率达99.92%。处理前后的菌渣与有机肥标准作对比,除含水率外其余检测指标均达到有机肥标准要求。该项研究为阿维菌素菌渣的资源化利用提供了理论依据。     

某城市污水处理厂二期污水处理工程设计研究

详细介绍了某城市第一污水处理厂在现有工程的基础上二期工程的工艺设计以及构筑物、设备参数;二期工程充分利用原有工程场地,本着现有、新建运行管理便捷统一原则,采用改良型A/A/O生化池作为二级处理主体工艺;二期工程投入运营后,某城市污水处理厂达到20×104 m3/d的污水设计规模.最终污水厂出水水质达到了《城镇污水处理厂污染物排放标准》(GB 18918-2002)一级 A排放标准.污水处理厂运营后,经济效益显著,可保本经营,并具有企业自我发展的能力.     

短波长X射线衍射技术及在环境工程中的应用展望

介绍了短波长特征X射线衍射无损检测分析原理和方法,无损地测定了预拉伸铝板、高强钢孔挤压件、铝合金搅拌摩擦焊接件等材料部件的内部残余应力、内部物相、内部织构及其分布,并分析讨论了测试结果。该仪器具有体积小,投资少、使用维护方便等优势,展望了该无损检测分析技术在装备环境工程中的应用前景。     

La3+掺杂对吸附相反应制备TiO2复合催化剂的结晶过程及弱紫外光下活性的影响

利用吸附相反应技术制备弱紫外光响应的高效催化剂,并通过XRD、XPS以及HRTEM探索了不同焙烧温度下La3+掺杂量对TiO2结晶过程的影响.结合弱紫外光下甲基橙的降解反应,深入研究催化剂结晶过程的变化对弱紫外光下催化剂活性的影响.结果表明,La3+掺杂会抑制TiO2的结晶过程.当焙烧温度或者掺杂量较低时,La3+不能进入TiO2的晶格结构但会轻微地抑制TiO2的结晶过程;未进入晶格结构的La3+存在会引入光生载流子的浅能级捕获中心,在弱光体系中极大提升了催化剂的活性.当La3+的掺杂量为0.05%(原子分数)时,经过900℃焙烧后催化剂降解能力最高,其活性超过商用P25的2倍多.在较高La3+掺杂量(超过0.20%)时,900℃焙烧后一定量La3+进入TiO2的晶格结构而大大抑制了TiO2结晶;这种强烈的抑制作用使得催化剂中存在大量无定形结构TiO2,无定形TiO2甚至多于700℃焙烧后的催化剂,反而大大抑制了弱光体系中催化剂活性.     

Application of comprehensive two-dimensional gas chromatography with mass spectrometric detection for the analysis of selected drug residues in wastewater and surface water

Pharmaceutical residues have become tightly controlled environmental contaminants in recent years, due to their increasing concentration in environmental components. This is mainly caused by their high level of production and everyday consumption. Therefore there is a need to apply new and sufficiently sensitive analytical methods, which can detect the presence of these contaminants even in very low concentrations. This study is focused on the application of a reliable analytical method for the analysis of 10 selected drug residues, mainly from the group of non-steroidal anti-inflammatory drugs (salicylic acid, acetylsalicylic acid, clofibric acid, ibuprofen, acetaminophen, caffeine, naproxen, mefenamic acid, ketoprofen, and dicofenac), in wastewaters and surface waters. This analytical method is based on solid phase extraction, derivatization by N-methyl-N-(trimethylsilyl)trifluoroacetamide (MSTFA) and finally analysis by comprehensive two-dimensional gas chromatography with Time-of-Flight mass spectrometric detection (GC×GC- TOF MS). Detection limits ranged from 0.18 to 5 ng/L depending on the compound and selected matrix. The method was successfully applied for detection of the presence of selected pharmaceuticals in the Svratka River and in wastewater from the wastewater treatment plant in Brno-Modrice, Czech Republic. The concentration of pharmaceuticals varied from one to several hundreds of ng/L in surface water and from one to several tens of μg/L in wastewater.     

LNAPLs污染物在层状非均质多孔介质中的运移试验研究

文章通过室内试验研究层状非均质多孔介质中轻非水相液体(Light Non-Aqueous Phase Liquid,LNAPL)的运移机制与分布特性。首先,在二维砂槽上进行LNAPL的入渗试验,试验过程中用数码相机进行拍照,把LANPL的扩散过程以图像的形式记录下来;然后,用AutoCAD对图片进行分析处理,得出不同时刻LNAPL的入渗锋面变化图。结果发现,介质结构突变面改变了LNAPL的迁移模式。在LNAPL由中砂进入细砂层后,由于受到毛细作用的增强,其运移速度加快;而由中砂进入粗砂,受粗砂介质阻滞作用增强的影响,LNAPL运移速度变小。当LNAPL由干砂进入湿润砂体时,由于孔隙水浮托力增大,LNAPL先产生纵向运移,随后以横向迁移的形式在地下水位上部聚积。当达到一定厚度后,LNAPL的压头足以克服浮托力,驱替孔隙水进入砂土孔隙。另外,LNAPL的厚度足够大时,方可克服饱水层受到的浮托力,在地下水位上形成LNAPL池,并因孔隙水向周围砂体排泄,LNAPL池周围的水位上升。     

微波消解/ICP-AES法分析冶炼厂固废中重金属

分析固体废物中金属元素全量分析的微波消解条件,通过实验确定样品的粉碎粒度、消解功率、消解温度、消解时间等因素对样品消解效果的影响,以等离子发射光谱测定冶炼厂固体废物中24种痕量金属元素,通过测定的检出限、精密度、准确度,确立冶炼厂固体废物痕量金属全量分析检测方法准确高效。     

非均相类Fenton试剂的制备及其在焦化废水处理中的应用研究

利用浸渍法,将Fe3＋负载在经酸碱改性后的粉状活性炭上,当浸渍液浓度为2．5％,固化温度为270℃时,制成的催化剂催化活性较高。用自制的非均相类benton试剂降解焦化废水,通过正交试验和极差分析得出,影响因素的主次顺序为催化剂用量〉初始pH值〉反应时间〉H：0：投加量。结果表明,在100ml水样中。室温条件下,初始pH值为4．0,催化剂使用量为1．5g,H20：投加量为5ml（分两次投加）,反应时间为90min时,COD去除率可达99％。采用混凝＋化学沉淀＋非均相类Fenton试剂法处理焦化废水,各主要出水水质指标为：色度lO倍;COD浓度38．5mg／L;氨氮浓度8．4mg／L,达到国家一级排放标准。     

LNAPL在砂质含水层中动态迁移的电阻率法监测试验研究

在海滨潮间带采集细砂,通过室内柴油泄漏模拟试验,利用自制电阻率监测系统对轻非水相液体在砂土-地下水系统垂向渗透过程进行电阻率变化动态监测;通过配制不同含油率砂土测定其静态电阻率变化规律,探讨电阻率变化的影响因素;最后取样分析测定污染含水介质稳定后含水率及含油率,对监测结果有效性进行了验证;并利用显微成像法对污染砂土进行了微观形态分析.结果表明,柴油污染砂土微观形态上胶结现象明显;柴油渗透海滨砂土过程电阻率大小同含水饱和度,比电阻率和含油饱和度之间存在良好的相关性,均可用Archie公式拟合,n值分别为2.36和0.15;通过电阻率测定可以有效估算柴油透镜体厚度;电阻率随深度的变化可以反映含油率和含水率的垂向分布.本研究为轻质油品储罐或者海上油品输运过程泄露造成的海滨砂土地下污染扩散过程监测及机制研究提供了一种有效的方法,也可为其他典型石油泄漏污染场地的电阻率法探测或监测提供参考.