Valorization of solid waste in sugar factories with possible applications in India : A review

Sugar production is a major agro-based industry in India that generates various solid wastes viz. sugarcane trash, bagasse, press mud and bagasse fly ash. This work examines the state-of-the-art in innovative value added products that can be obtained from the transformation of these wastes. Challenges in implementing these waste valorization solutions are also highlighted. It is observed that the extent of research and adoption of these solutions vary considerably. Both industry involvement as well as government encouragement is required in translating the research findings into commercial products.     

Formulation of criteria for pollution control on cement products produced from solid wastes in China

The process of producing cement products from solid waste can increase the level of pollutants in the cement products. Therefore, it is very important to establish a pollution control standard for cement products to protect the environment and human health. This paper presents acceptance limits for the availability of heavy metals in cement products which have been produced from solid wastes and explains how the limits have been calculated. The approach and method used to formulate these criteria were based on EN 12920. The typical exposure scenarios used in this paper involve concrete being used for drinking water supply pipelines and concrete pavements and are based on an analysis of typical applications of cement in China, and the potential for contact with water. The parameters of a tank test which was based on NEN 7375 were set in accordance with the environmental conditions of typical scenarios in China. Mechanisms controlling the release of heavy metals in concrete and a model for that release were obtained using the leaching test. Finally, based on acceptance criteria for drinking water and groundwater quality in China, limit values for the availability of heavy metals in concrete were calculated.     

Solid waste management in European countries: a review of systems analysis techniques

In the past few decades, solid waste management systems in Europe have involved complex and multi-faceted trade-offs among a plethora of technological alternatives, economic instruments, and regulatory frameworks. These changes resulted in various environmental, economic, social, and regulatory impacts in waste management practices which not only complicate regional policy analysis, but also reshape the paradigm of global sustainable development. Systems analysis, a discipline that harmonizes these integrated solid waste management strategies, has been uniquely providing interdisciplinary support for decision making in this area. Systems engineering models and system assessment tools, both of which enrich the analytical framework of waste management, were designed specifically to handle particular types of problems. Though how to smooth out the barriers toward achieving appropriate systems synthesis and integration of these models and tools to aid in the solid waste management schemes prevalent in European countries still remains somewhat uncertain. This paper conducts a thorough literature review of models and tools illuminating possible overlapped boundaries in waste management practices in European countries and encompassing the pros and cons of waste management practices in each member state of the European Union. Whereas the Southern European Union (EU) countries need to develop further measures to implement more integrated solid waste management and reach EU directives, the Central EU countries need models and tools with which to rationalize their technological choices and management strategies. Nevertheless, considering systems analysis models and tools in a synergistic way would certainly provide opportunities to develop better solid waste management strategies leading to conformity with current standards and foster future perspectives for both the waste management industry and government agencies in European Union.     

Sustainable recycling model: A comparative analysis between India and Tanzania

Higher economic growth in developing countries has caused higher amounts of wastes. Local government authorities in these countries usually fail to provide adequate services to dispose the increasing amounts of waste, resulting in threats for both the population and environment health. There is therefore an urgent need for recycling as a form of waste management in order to stop the devastating effects of solid waste in developing countries. Using a qualitative method of analysis, this study presents a model to measure and rank the sustainability of recycling programs in India and Tanzania. The model consists of six main constructs including “production, economic, governmental, social, technological, and international factors”. The results showed that India outperforms Tanzania in sustainable recycling programs: per capita waste generated per day in Delhi is higher than in Dar es Salaam; the government of India focuses more on developing recycling plans and techniques as compared to the government of Tanzania where the country is not actively involved in the recycling process; and the solid waste management planning in India is being performed better than Tanzania.     

Overview of non-hazardous solid waste in the small island state of Mauritius

In Mauritius, solid waste disposal has been a cause for concern since the 1980s. Currently, there is no segregation of waste and some 1200 tonnes of solid waste are generated daily by the 1.24 million inhabitants of the island. As processes such as recycling and composting are still in their infancy stage, most of the waste generated have to be disposed of at the sole landfill. The solid waste management practices of 1980s and early 1990s are no longer compatible with the changing composition and quantity of wastes now generated. As a result, there is an urgency to review the whole waste management system and come forward with sustainable solutions.This paper presents an overview of the disposal of non-hazardous solid waste in Mauritius and provides recommendations for improving the current disposal system.     

水中3种微囊藻毒素的高效液相色谱测定方法优化

对天然水体中3种痕量微囊藻毒素（MC-RR、MC-YR、MC-LR）的淋洗、洗脱、液相色谱测定等环节进行单因素不同水平考察,结果表明：以体积分数为45%的甲醇水溶液（含0.1%的TFA）为固相萃取淋洗剂、10 mL甲醇（含01%TFA）为固相萃取洗脱剂,体积分数为70%的甲醇水溶液（含0.1%TFA）为液相色谱流动相,可在6 min内有效分离MC-RR、MC-YR、MC-LR。将优化后的方法用于实际加标水样的测定,MC-RR、MC-YR、MC-LR的方法检出限分别为0.064 μg/L、0.098 μg/L、0.095 μg/L,加标回收率为87.0%~116%,RSD为10.2%~18.8%。     

Comparing the greenhouse gas emissions from three alternative waste combustion concepts

Three alternative condensing mode power and combined heat and power (CHP) waste-to-energy concepts were compared in terms of their impacts on the greenhouse gas (GHG) emissions from a heat and power generation system. The concepts included (i) grate, (ii) bubbling fluidised bed (BFB) and (iii) circulating fluidised bed (CFB) combustion of waste. The BFB and CFB take advantage of advanced combustion technology which enabled them to reach electric efficiency up to 35% and 41% in condensing mode, respectively, whereas 28% (based on the lower heating value) was applied for the grate fired unit. A simple energy system model was applied in calculating the GHG emissions in different scenarios where coal or natural gas was substituted in power generation and mix of fuel oil and natural gas in heat generation by waste combustion. Landfilling and waste transportation were not considered in the model. GHG emissions were reduced significantly in all of the considered scenarios where the waste combustion concepts substituted coal based power generation. With the exception of condensing mode grate incinerator the different waste combustion scenarios resulted approximately in 1 Mton of fossil CO₂-eq. emission reduction per 1 Mton of municipal solid waste (MSW) incinerated. When natural gas based power generation was substituted by electricity from the waste combustion significant GHG emission reductions were not achieved.     

固体废物相关概念的基本特点

固体废物法对废物的一些概念进行了定义,在固体废物环境管理当中,对这些概念缺乏深入认识,导致在实际管理中对固体废物和危险废物的调查、认定、统计、管理、预测、设施建设等一系列与废物相关的行动出现偏差甚至不准确。对固体废物、危险废物以及废物利用、处置、贮存、排放等概念包含的内容进行了研究,提出了一些新的认识观点。     

垃圾填埋场细菌种群空间分布及组成多样性研究

采用PCR-DGGE技术对垃圾填埋场细菌种群垂直分布及组成多样性进行了研究．结果表明：垃圾填埋场细菌种群组成波动较大,某些种群对环境因子的变化十分敏感．在填埋年龄已达3a的取样点,细菌种群的多样性随着垃圾填埋深度的增加而呈现“多—少—多”的变化趋势。各种群间相对密度也呈现由不均一到均一的变化规律,部分层次优势种和非优势种发生较大变化．填埋深度4．0m至6．25m左右的区域是填埋场微生物区系组成发生变化的过渡区,该区域细菌种群的多样性较小,亲缘关系相差比较大的种交叉在一起,具有明显的过渡特征．从时间因素来看,填埋场同层次微生物群落组成随时间延长,种群构成趋于稳定．表层垃圾1～2a内,细菌种群处于交替更叠的阶段,日趋发育成熟．8．25m以下层次的细菌种群主要受填埋深度影响,与填埋时间关系较小。     

Effect of steam hydration on performance of lime sorbent for CO2 capture

Lime is considered a feasible sorbent for the capture of CO₂ from large stationary sources. The positive attributes of a natural source material, low cost and lack of harmful by-products are offset by rapid deterioration in performance and high regeneration temperature. Performance can be improved by hydrating the lime using steam. We investigate a steam hydration process wherein lime is hydrated for 5 min at 300 °C and atmospheric pressure in a mixture of steam and CO₂. The experiments consisted of 10 capture cycles with 60% of the lime active at the end. Extrapolation using a decay model suggests a residual carbonation level of 48%, significantly higher than the 8% achieved by dry lime cycles. The cost of replacement sorbent under these conditions is less than $1/t of CO₂ captured. The hydrated lime process also reduces the thermal load, for heating and cooling, by half as well as the inventory, and therefore solids handling, by a factor 5 over dry lime. The introduction of the hydration reaction provides another exothermic reaction for heat management.