Zinc recovery from hazardous construction wastes via an integrated process of the air classification,alkaline leaching,and water washing

Zinc- and lead-containing wastes are often mixed with construction and demolition wastes in many factories, generating abundant of heavy metal-enriched hazardous waste. In the present study, a novel integrated process of air classification, alkaline leaching, and water washing dechlorination was proposed for the efficient recycling of Zinc (Zn) resources. The first air classification process was realized via venturi tube, wherein the content of Zn could increase by 20 wt.%. After that, the product underwent an alkaline leaching process. Results showed that Zn recovery rate increased with fine particle sizes, and a 65% recovery rate was obtained under the following conditions of 5 mol/L NaOH, liquid/solid 10:1, and leaching time 1 h. Finally, water washing associated with microwave and ultrasonic treatments could remove over 85% of Cl and other water-soluble salts. All the results indicated that the integrated method had an excellent recovery rate for Zn resources from construction and demolition wastes.     

泰安市医疗废物的特性研究

通过实验分析了医疗废物的组成、灰分、水分、挥发分、固定碳和热值等特性参数,探讨其燃烧特性。研究表明,医疗废物具有高热值、高挥发分的特点,其热值远高于一般城市生活垃圾,而高挥发分的特点决定了其容易着火和稳定燃烧的特性。     

考虑pH值和挥发性脂肪酸影响的填埋城市固废厌氧降解模型

建立了描述填埋城市固体废弃物降解过程和行为的2阶段厌氧降解机理模型.模型考虑了含水率、挥发性脂肪酸(VFA)和pH值等主要环境因素的作用.为了适用于不同渗滤液酸化水平下的降解,单独考虑了pH值和分子态VFA对甲烷菌繁殖的影响.建立了气相高CO2分压下的渗滤液pH值计算方程,并给出了降解环境中CO2分压的计算方法.通过对一固废降解试验的模拟验证了模型的有效性.最后,采用所建立的pH值计算方程揭示了填埋环境下高CO2分压对渗滤液pH值影响显著,渗滤液pH值与VFA间缺乏不同酸化水平下的一致对应关系和高酸化水平下pH值对VFA浓度变化不敏感、分子态VFA抑制作用明显等规律.     

臭氧-曝气生物滤池深度处理垃圾焚烧渗滤液可行性研究

研究了臭氧-曝气生物滤池(BAF)代替纳滤和反渗透深度处理垃圾焚烧渗滤液达标排放的技术可行性.半间歇臭氧氧化试验表明,实验用水的可生化性随着氧化时间的增加而增加,色度及UV254, 15min内去除率分别达91%和64%;氧化时间为45min时COD去除率59%, 45min后COD去除较慢, 120min时去除率77%.确定臭氧氧化时间为1h,在同样臭氧浓度与流量下进行了臭氧-BAF处理垃圾焚烧渗滤液的连续实验.结果发现,此工艺对COD、色度和UV254的去除率分别可达75%,95%和90%,其中2/3运行时间里COD低于排放标准100 mg/L.其中出水色度可稳定保持在40度以下达标排放.经过进一步优化,臭氧-BAF有望用于垃圾焚烧渗滤液的达标处理.GC-MS检测表明烷烃,芳香族化合物及含氮杂环化合物是试验用水的主要污染物,臭氧-BAF能够有效去除后两类化合物,但难以去除烷烃.     

Thermodynamic method for the prediction of solid CO2 formation from multicomponent mixtures

The increase in GHG concentration has a direct effect on global climate conditions. Among the possible technologies to mitigate GHG emissions, CCS is being accepted to gain emission reduction. Such technology also involves cryogenic CO₂ capture processes based on CO₂ freeze-out or where the formation of solid CO₂ must be avoided. Captured CO₂ is usually transported in pipelines for the reinjection.The risk associated to the release of CO₂ is due to the changing temperatures and pressures the system may experience, which can lead to the deposition of solid CO₂ where it must be avoided. Prolonged exposure to dry ice can cause severe skin damage and its resublimation could pose a danger of hypercapnia. It is, thus, necessary to build up a tool able to predict the conditions in which CO₂ can freeze-out.A thermodynamic methodology based on cubic EoSs has been developed which is able to predict solid–liquid–vapor equilibrium of CO₂ mixtures with n-alkanes or H₂S which are usually found in equipment for acidic gas, mainly natural gas, treatment.The focus is a detailed analysis of the method performances when more than two components are present since, for such a case, literature does not provide significant modeling results.     

两种垃圾焚烧炉灰渣的重金属成分与放射性检测

对8种重金属As、Hg、Mn、Cr、Cu、Cd、Co、Ni和Pb在两种垃圾焚烧炉灰渣中的浓度分布,浸出毒性及放射性进行检测.样品(炉渣和飞灰)分别取自北京(循环流化床焚烧炉CFBI)和深圳(炉排焚烧炉)两台不同燃烧方式的垃圾焚烧炉.研究表明,CFBI炉渣及飞灰中的重金属As、Mn、Cu、Cd、Co含量在炉渣中含量最低,中灰次之,飞灰中含量最高.重金属Hg在炉渣和飞灰中的含量相当,在中灰中的含量最低;Cr和Ni在炉渣中的含量也偏高,在中灰和飞灰中的含量相当Pb含量依中灰、炉渣和飞灰的顺序逐渐升高.浸出毒性检测结果显示,循环流化床垃圾焚烧后炉渣及飞灰中的重金属浸出毒性远低于国家标准1～2个量级,重金属总体排放量较低.炉排炉垃圾焚烧的炉渣及飞灰中的重金属含量却高很多,尤其是Cr、Pb、Cd和Cu.放射性检测结果表明,两种焚烧所产生的灰渣放射性均低于国家标准.在排放时无需作任何放射性方面的处理.最后,对焚烧灰渣的稳定化技术进行了讨论.     

Measurement of the leaching behaviour of granular solid wastes

Leaching of granular solids can be described in terms of specific mass transfer functions of a simple mathematical form.

The parameters can be determined by column leaching experiments under well known flow conditions.

Initially available concentrations are obtained from batch experiments at high dilution. Total concentrations in the solids are determined independently to calculate the available fractions.

The determination of the flow pattern is done by radiotracer measurements. Leachates are analyzed by various analytical methods including AAS and INAA. Total concentrations in the solids are determined by INAA preferably.     

建筑垃圾资源化处置技术及装备综述

介绍了国内外有关建筑垃圾资源化处置的相关工艺,并从分选除杂、破碎、筛分、整形强化四方面总结了建筑垃圾资源化处置技术与装备,分析其性能特点及应用范围,为我国相关工艺技术及装备的发展提供参考和借鉴。     

Characterization of fulvic acids during olive mill waste composting (Elemental,Thermal and fluorescence analyses)

Elemental analysis, fluorescence spectroscopy and differential scanning calorimetry (DSC) were applied to the study of fulvic acids isolated from different stages during olive mill waste composting. The fulvic extracted acids are characterized by a high nitrogen content and O/C ratio values that may result from the high degree of humification and the synthesis of more condensed humic complexes. This was confirmed by fluorescence spectroscopy in the synchronous-scan mode by the decrease of shoulder intensities at intermediate wavelengths indicating the increase of polycondensation and conjugation of unsaturated structures and the greater uniformity of fluorophores. Fluorescence spectra in the emission, excitation and synchronous modes became simpler with compost maturation. This was confirmed by DSC results which proved the high degree of polycondensation of aromatic nuclei of fulvic acid molecules during olive mill waste composting.     

计算机废弃物的处理与利用

介绍计算机废弃物的来源、组成、污染,重点阐述了计算机废弃物的拆卸技术和塑料、线路板、贵金属的回收利用方法。对计算机废弃物处理有重要的参考借鉴价值。