春季广州城区空气中VOCs来源解析

2013年4月在广州市区对大气中挥发性有机化合物(VOCs)进行了观测,对其变化特征和来源进行了分析。结果表明,观测期间测得的VOC总平均混合比为41.35×10~(-9),表现为烷烃芳香烃烯烃炔烃;利用PMF解析出观测时段内影响广州市区的9个VOCs主要来源,各源占比情况依次为:LPG排放老化VOC汽油挥发石化、未知源汽油车排放油漆溶剂柴油车排放天然源;与机动车相关和工业相关的来源分别占到了大气VOCs的46.8%和21.0%。     

基于力学机制的钢筋混凝土柱抗剪承载力模型∗

为了兼顾钢筋混凝土(RC)柱抗剪承载力分析的计算精度和简便性,研究建立了一种基于力学机制的RC柱抗剪承载力简化模型。首先基于变角桁架-拱模型理论,结合变角桁架模型的力平衡条件以及变角桁架模型和拱模型之间的变形协调条件,建立了RC柱抗剪承载力分析的理论模型;然后利用38组试验数据进行统计分析,分别确定了混凝土、箍筋和拱模型的抗剪承载力贡献系数近似取值,在此基础上建立了R C柱抗剪承载力分析的简化模型;最后通过与试验数据进行对比分析,验证了该模型的计算精度和适用性。分析结果表明,该模型不仅可以合理分析混凝土、箍筋和拱作用的抗剪承载力贡献,具有较高的计算精度,而且计算公式较为简洁。     

中国区域可持续发展综合优势能力空间关联分析

采用空间统计方法研究了中国31个省、市、自治区的可持续发展综合优势能力的空间关联关系,结果显示中国可持续发展的总资产能力、总负债能力和综合优势能力均存在较强的空间依赖性。综合优势能力Z值与总资产Z值存在显著正相关（R=0.944）,而与总负债Z值存在显著的负相关（R=-0.952）。利用综合优势能力空间关联Z值对中国可持续发展能力进行初步的分区,并采用古典聚类（K means）方法对中国可持续发展能力进行同质性研究,利用K聚类结果对空间聚类（G统计）结果进行修正,将中国可持续发展能力划分为3种区域类型：中国东部沿海强发展区域、中国中部中等发展区域和中国西部弱发展区域。分区结果与中国传统的东部、中部、西部区域划分基本对应,东部沿海省市除海南和广西处于中等发展类型外,其他省市均处在强发展类型之列,中国中部全部省市均处于中等发展类型而中国西部全部省市均处于弱发展类型。     

关于生态补偿机制基本法律问题研究--以三江源国家级自然保护区生物多样性保护为例

本文以现代生态法文化观念为理论导引,在对传统生态法理论进行检视和对三江源区的生物多样性保护与生态裣机制进行尝试考评的基础上,以理论分析与实证调研相结合的方法,提出了具有建设性和可行性的法律对策。     

Inverse modeling of Asian Rn flux using surface air Rn concentration

When used with an atmospheric transport model, the ²²²Rn flux distribution estimated in our previous study using soil transport theory caused underestimation of atmospheric ²²²Rn concentrations as compared with measurements in East Asia. In this study, we applied a Bayesian synthesis inverse method to produce revised estimates of the annual ²²²Rn flux density in Asia by using atmospheric ²²²Rn concentrations measured at seven sites in East Asia. The Bayesian synthesis inverse method requires a prior estimate of the flux distribution and its uncertainties. The atmospheric transport model MM5/HIRAT and our previous estimate of the ²²²Rn flux distribution as the prior value were used to generate new flux estimates for the eastern half of the Eurasian continent dividing into 10 regions.The ²²²Rn flux densities estimated using the Bayesian inversion technique were generally higher than the prior flux densities. The area-weighted average ²²²Rn flux density for Asia was estimated to be 33.0 mBq m⁻² s⁻¹, which is substantially higher than the prior value (16.7 mBq m⁻² s⁻¹). The estimated ²²²Rn flux densities decrease with increasing latitude as follows: Southeast Asia (36.7 mBq m⁻² s⁻¹); East Asia (28.6 mBq m⁻² s⁻¹) including China, Korean Peninsula and Japan; and Siberia (14.1 mBq m⁻² s⁻¹). Increase of the newly estimated fluxes in Southeast Asia, China, Japan, and the southern part of Eastern Siberia from the prior ones contributed most significantly to improved agreement of the model-calculated concentrations with the atmospheric measurements. The sensitivity analysis of prior flux errors and effects of locally exhaled ²²²Rn showed that the estimated fluxes in Northern and Central China, Korea, Japan, and the southern part of Eastern Siberia were robust, but that in Central Asia had a large uncertainty.     

钢渣掺量对泡沫混凝土砌块性能的影响

泡沫混凝土是一种环保、节能的保温隔热材料,以其优良的保温性能,受到越来越多研究者的关注。对钢渣的特性进行了分析测试,对钢渣不同掺量对泡沫混凝土砌块特性的影响进行了研究,结果表明,采用添加5％～35％钢渣所制备的钢渣泡沫混凝土砌块,其密度等级为JC／T1062—2007中的B10级,掺人5％、15％钢渣的泡沫混凝土抗压强度达到A3．5等级,掺人25％、35％钢渣的泡沫混凝土抗压强度达到A2．5等级。随着钢渣掺量的增大,抗压强度、抗折强度降低,吸水率增大。在同一钢渣掺量的情况下,泡沫混凝土砌块的抗压强度变化率增加显著,而且随着钢渣的加入量升高而增大。钢渣的加入有利于提高泡沫混凝土砌块的后期抗压强度。     

Experimental and theoretical studies on physico-chemical parameters affecting the solubility of phosphogypsum

Phosphogypsum is a waste by-product of the phosphate fertilizer industry, which is usually disposed in the environment because of its restricted use in industrial applications. Physico-chemical conditions existing in stack fluids and leachates are of major importance and determine solubility and redox stability of phosphogypsum, as well as radionuclide release from stacks to terrestrial environments. The aim of this study is to assess the effect of key parameters (e.g. ionic strength, temperature, pH) on the solubility of phosphogypsum. Phosphogypsum sampling and in-situ measurements were carried out at a coastal stack in Cyprus, solubility experiments were performed in simulated laboratory systems and thermodynamic calculations by means of MINTEQA2, an equilibrium speciation model. Generally, increasing ionic strength and temperature leads to increased phosphogypsum solubility, with the former being much more effective. The increased solubility of phosphogypsum in saline solutions is attributed solely to ionic strength effects on the activity of ionic species in solution and no solid phase transformations could be observed. The effect of pH on phosphogypsum solubility seems to be insignificant at least in a pH range between 4 and 8. Regarding uranium levels, there is a strong correlation between salinity and uranium concentration and linear correlation between phosphogypsum solubility and uranium levels in stack solutions, indicating the incorporation of uranium into the gypsum lattice and the formation of a solid solution.     

GEOLOGIC INFERENCE FROM “FLOW NET” TRANSMISSIVITY DETERMINATION: THREE CASE STUDIES1

A graphical inverse method for determining the regional transmissivity distribution was applied to three field problems. The study areas were the Hanford Site, Washington; the Rocky Mountain Arsenal, Colorado; and the Nevada Test Site, Nevada. This method can aid in flow system conceptualization by revealing the location of bedrock controls for groundwater flow. It is a valuable tool for aiding the hydrogeologist in asking questions about the nature of trends in the pattern of transmissivity values. Quantitative estimates of regional transmissivities can be used as starting points for further parameter refinement. Sensitivity analysis using Monte Carlo simulation shows that quantitative estimates of transmissivity can be obtained when measurement error in the hydraulic head does not cause a large error in the hydraulic gradient.     

用固体力学化学理论研究岩土的力学化学行为——以成都龙泉紫色土为例

根据固体力学化学理论 ,提出用化学动力学方法研究岩土破坏及滑坡形成的机理 ,并以成都龙泉紫色土为例研究了在力与水协同作用下易滑土层的力学化学行为。实验表明 ,土长期抗剪强度降低的幅度与溶液的pH值有关 ,土的溶解速度与易溶盐含量有关 ,且溶解曲线略呈“S”型。这初步证明了龙泉紫色土破坏的力学 化学效应及其可能存在的自催化趋势。通过实验了解了力与水协同作用导致土破坏的力学化学规律 ,并将定量求解滑面长期抗剪强度与反应机理研究结合起来 ,为定量评价地下水和应力对岩土破坏机理这一滑坡学关键问题打下基础。     

Manufacture of strand board made from construction scrap wood

The objective of this research was to evaluate the physical and mechanical properties of strand board made from construction scrap wood. The strand board was manufactured using Sugi (Cryptomeria japonica D. Don) and Douglas-fir (Pseudotsuga japonica) strands selected from construction scrap wood. The strands were oriented, and three-layer (face/core/face) strand board of three types was produced: one in which the strands of the face layer were oriented at a right angle to those of the core layer (R board), another in which the strands of the face layer were oriented parallel to those of the core layer (P board), and a third in which the strands of both layers were oriented at random (Ra board). The physical and mechanical properties of the boards were evaluated based on Japanese Industrial Standard (JIS). The main results obtained are as follows: the bending strength of the strand board with a density larger than 0.55 g/cm³ exceeded the standard value of type 18 particleboard of JIS A 5908. The bending strength of the strand board was affected by board density, strand orientation and resin content, and became larger with increased density as well as resin content. That of the parallel specimen of P board was the largest among the specimen-orientations and types. The internal bond strength of the strand board with a density larger than 0.55 g/cm³ exceeded the standard value of type 18 particleboard and type 24-10 particleboard of JIS A 5908. The internal bond strength was markedly affected by the resin content of the core layer, and became larger with increased density. The thickness swelling of the strand board decreased with increased resin content, and become larger with increased density.