宁波和温州地区夏季大气中不同粒径颗粒物特征分析

对宁波地区北仑和奉化站、温州地区乐清站3个监测点夏季TSP、PM10、PM2.5和PM1.0进行监测,测试分析各种粒径颗粒物浓度水平和粒径分布特征,并通过化学质量平衡(CMB)受体模型对颗粒物进行源解析。监测结果显示,夏季宁波、温州地区TSP和PM10日均浓度为0.049～0.134mg/m3和0.025～0.084mg/m3,均未超过我国环境空气质量二级标准;PM2.5日均浓度为0.007～0.069mg/m3,按美国2006年EPA最新标准限值0.035mg/m3衡量,奉化、乐清、北仑站的超标天数占总监测天数的比例分别为75%、40%和37.5%。粒径分布统计结果显示,3个监测站点PM10占TSP的比例为48.78%～86.96%;PM2.5占TSP的比例为33.33%～72.46%;奉化和乐清监测点PM10中PM2.5和PM1.0的比例平均值在50%以上。源解析结果显示,夏季TSP主要来源于土壤尘,其次是建筑尘和煤烟尘,其贡献率分别为40.70%～55.49%、9.62%～13.64%和5.85%～17.28%。     

Source apportionment of PM2.5 and visibility in Jinan, China

Atmospheric extinction is impacted by the chemical composition of particles. To better understand the chemical composition of PM_2.5 (particles with diameters of less than 2.5 μm) and its relationship with extinction, one-month sampling campaigns were carried out in four different seasons from 2013 to 2014 in Jinan, China. The seasonal average concentrations of PM_2.5 were 120.9 (autumn), 156.6 (winter), 102.5 (spring), and 111.8 μg/m³ (summer). The reconstructed PM_2.5 chemical composition showed that sulfate, nitrate, chlorine salt, organic matter (OM), mineral dust, elemental carbon (EC) and others accounted for 25%, 14%, 2%, 24%, 22%, 3% and 10%, respectively. The relationship between the chemical composition of PM_2.5 and visibility was reconstructed by the IMPROVE method, and ammonium sulfate, ammonium nitrate, OM and EC dominated the visibility. Seven main sources were resolved for PM_2.5, including secondary particles, coal combustion, biomass burning, industry, motor vehicle exhaust, soil dust and cooking, which accounted for 37%, 21%, 13%, 13%, 12%, 3% and 1%, respectively. The contributions of different sources to visibility were similar to those to PM_2.5. With increasing severity of air pollution, the contributions of secondary particles and coal combustion increased, while the contribution of motor vehicle exhaust decreased. The results showed that coal combustion and biomass burning were still the main sources of air pollution in Jinan.     

Solidification/stabilization of ash from medical waste incineration into geopolymers

In the present work, bottom and fly ash, generated from incinerated medical waste, was used as a raw material for the production of geopolymers. The stabilization (S/S) process studied in this paper has been evaluated by means of the leaching and mechanical properties of the S/S solids obtained. Hospital waste ash, sodium hydroxide, sodium silicate solution and metakaolin were mixed. Geopolymers were cured at 50 °C for 24 h. After a certain aging time of 7 and 28 days, the strength of the geopolymer specimens, the leachability of heavy metals and the mineralogical phase of the produced geopolymers were studied. The effects of the additions of fly ash and calcium compounds were also investigated. The results showed that hospital waste ash can be utilized as source material for the production of geopolymers. The addition of fly ash and calcium compounds considerably improves the strength of the geopolymer specimens (2–8 MPa). Finally, the solidified matrices indicated that geopolymerization process is able to reduce the amount of the heavy metals found in the leachate of the hospital waste ash.     

Triton X-100在黄土上的吸附行为及影响因素

水土体系下,应用批实验法研究了Triton X-100在天然黄土上的吸附行为与平衡时间、Triton X-100浓度、溶液离子强度和pH值的关系.结果表明,Triton X-100在黄土中的吸附平衡时间约为30 min,其吸附动力学符合一级动力学模型,相应拟合参数Qe、k1、r2分别为3.041 mg·g-1、0.102 min-1、0.993 4.吸附等温线明显为非线性,在利用的4种等温吸附模型中,Sips模型对实验数据提供了最佳的拟合,其拟合参数Qmax和r2分别为3.202 mg·g-1和0.998 7.溶液离子强度和pH值对Triton X-100在黄土上的吸附有显著的影响,其吸附量随NaCl浓度的增加而明显增加,随pH增加而降低.     

飞艇蒙皮缝线光老化试验研究

目的研究飞艇蒙皮缝线的光老化规律并确定其有效期。方法在辐照强度为0．35w／m^2@340nm,温度为77℃,相对湿度为70％,2h内照射1．5h、喷淋0．5h的条件下,采用氙灯光照进行30天的加速老化试验。通过测量飞艇蒙皮缝线试验后的断裂强力,计算得到飞艇蒙皮缝线的断裂强力下降率,评定蒙皮缝线的抗老化性能。结果经过16天的光老化试验,飞艇蒙皮缝线的断裂强力下降率达20%;试验30天后,缝线出现明显裂纹,断裂强力下降率达80％。结论随试验时间的增加,飞艇蒙皮缝线的力学性能下降的速率逐渐增大,飞艇蒙皮缝线在试验条件下的有效期为16天。     

基于光学在线监测及形态学研究的絮凝体强度分析方法

以PDA在线监测混凝过程和絮凝体形态学分析为基础,建立了絮凝体强度的分析评价方法.为了计算某一特定絮凝条件下形成絮凝体的黏结力,进行混凝实验并运用图像解析法及粒子图像测速技术研究絮凝体形态学特征.实验过程中将水样引入与光散射颗粒分析仪(PDA2000)相连的透明橡胶管内,并通过准确控制橡胶管内的水流速度梯度来改变作用于絮凝体上的剪切力,这样就可以在线监测絮体的破碎情况,然后根据PDA输出的FI曲线来确定絮凝体的临界破碎条件.根据临界破碎条件下剪切力、破碎力和黏结力的等量关系,确定黏结力系数k1,进而计算出可以表征絮凝体强度的黏结力B.该方法的有效性已经被大量以硫酸铝为混凝剂的腐殖酸混凝实验所证实.     

腐殖酸絮凝体形成过程中初期搅拌条件对其形态结构的影响

以腐殖酸为研究对象,采用硫酸铝为混凝剂进行混凝杯罐实验,借助PDA在线监测系统、图像解析法及粒子图像测速技术分析评价絮凝体的构造特征,着重探讨了混凝过程中初期快速搅拌条件对絮凝体形态结构的影响.结果表明,快速搅拌条件对腐殖酸絮凝体的形成过程及形态结构有着显著影响.最佳快速搅拌条件为:搅拌历时l min,搅拌强度300 r·min-,此时形成的絮凝体结构密实,抗剪切能力强,整体性能最优,絮凝体分形维数、强度及平均粒径分别为1.8842、0.164 N·m-2、0.43 mm.腐殖酸絮凝体的形成包括不溶性微粒的产生及初期颗粒的形成与结合等过程,其中,不溶性微粒的形成及初期颗粒的致密化过程是决定最终絮凝体形态构造的重要环节,而快速搅拌条件影响着混凝剂扩散混合效果和初期颗粒的形成速率与致密化程度,这也是初期快速搅拌条件对于腐殖酸混凝过程有显著影响的一个重要因素.     

Experimental investigation on mechanical and metallurgical properties of super duplex stainless steel joints using friction welding process

Friction welding is one of the most economical and highly practicable methods in joining similar and dissimilar metals. In this study, high-quality welds are produced in the super duplex stainless steel by continuous drive friction welding successfully. Design of experiment was done using central composite design of response surface methodology. In the present work, the microstructure and mechanical properties of friction welded super duplex stainless steel (UNS S32760) were examined. The base material has a microstructure consisting of the ferrite matrix with austenite islands. Ferrite content was analyzed through the phase analyzer software and found that it is in the range of 42–55% in all weld metals. The phases were further analyzed through X-ray diffraction method. All the weld metals have higher hardness than the base metals. Weld transverse tensile failures consistently occurred away from the weld zone and exhibit more hardness, yield and ultimate tensile strengths than the base material. The austenite content increases with nitrogen concentration. Nitrogen could enhance the yield stress and ultimately tensile strength of super duplex stainless steel. Secondary phase precipitation is not observed in the welded joint probably due to the shorter heating times.     

叶绿素a与环境因子关系的研究——以三明地区某水源地为例

根据2009～2012年水源地水质自动监测所得数据,分析叶绿素a的动态变化与环境因子的相关关系,筛选影响叶绿素a含量变化的环境因子。分析表明:该水源地水库水质状况属贫营养型,其中叶绿素a含量变化主要受总磷、水温、高锰酸盐指数影响,以这3种影响因子建立起的多元回归方程能较好的预测水库叶绿素a的变化趋势。     

基于水质模型的污染监控预警和应急管理研究

地表水环境的治理和改善受到社会、经济、环境等多方面因素的共同影响,如何合情、合理地制定地表水污染防治政策、规划,在复杂的水环境污染突发事件中及时掌握事态的发展和正确的处理处置方法是我国各级环境保护管理部门面临的一大难题。本论文以建立水质污染扩散模型为基础,结合我国地表水环境管理现状提出了一套地表水污染监控预警和应急管理体系,旨在建立废水污染源与地表水环境质量的内在联系,用科学的方法为地表水污染防治管理工作提供技术支撑。