Quantifying the characteristics of particulate matters captured by urban plants using an automatic approach

It is widely accepted that urban plant leaves can capture airborne particles. Previous studies on the particle capture capacity of plant leaves have mostly focused on particle mass and/or size distribution. Fewer studies, however, have examined the particle density, and the size and shape characteristics of particles, which may have important implications for evaluating the particle capture efficiency of plants, and identifying the particle sources. In addition, the role of different vegetation types is as yet unclear. Here, we chose three species of different vegetation types, and firstly applied an object-based classification approach to automatically identify the particles from scanning electron microscope(SEM)micrographs. We then quantified the particle capture efficiency, and the major sources of particles were identified. We found(1) Rosa xanthina Lindl(shrub species) had greater retention efficiency than Broussonetia papyrifera(broadleaf species) and Pinus bungeana Zucc.(coniferous species), in terms of particle number and particle area cover.(2) 97.9% of the identified particles had diameter ≤10 μm, and 67.1% of them had diameter ≤2.5 μm. 89.8% of the particles had smooth boundaries, with 23.4% of them being nearly spherical.(3) 32.4%–74.1% of the particles were generated from bare soil and construction activities, and 15.5%–23.0% were mainly from vehicle exhaust and cooking fumes.     

城市垃圾焚烧飞灰特性及水泥固化试验研究

试验分析了重庆市某城市垃圾焚烧发电厂飞灰的化学成分,研究了原飞灰的浸出毒性,考察了水泥对原飞灰和酸洗预处理飞灰中重金属的固化效果. 结果表明:飞灰中重金属Pb和Zn的浸出质量浓度均超过《危险废物浸出毒性鉴别标准》(GB5085.3-2007),因而被认为是危险废物,必须对之进行稳定化处理;酸洗预处理飞灰固化试块的抗压强度得到了一定程度的提高,其重金属Pb和Zn的浸出毒性均较相同配比、相同养护时间的原飞灰固化试块有明显降低;酸洗预处理飞灰固化试块抗压强度随掺入飞灰比例的降低和养护时间的延长而加大,在养护28 d时其抗压强度最高,达4.25 MPa;酸洗预处理飞灰固化试块在养护28 d时,其重金属Pb和Zn的浸出质量浓度分别比原飞灰所制固化试块降低了10.6%～59.0%和7.4%～73.7%.      

氢化物发生-原子荧光光谱法测定废水中砷探讨

砷是对人体有害的元素,当人体每天的摄入量超过100ug或更高时,对人体就会产生严重的危害,而有些工业废水中合有一定量的砷元素,如果这些工业废水不经处理排放到水中会我们的身体造成很大程度的伤害,所以我对某工厂的工业废水进行检测,检测其排放废水中所含有砷元素的多少。火焰原子荧光和石墨炉原子荧光的检测能力无法满足测定的要求,...     

圆环巴西试验的抗拉强度建议公式

目的改进Hobbs公式得到的计算值普遍较大这一问题,提出圆环巴西试验的抗拉强度建议公式。方法对巴西试验圆环的应力解进行分析,并引用砂岩的试验数据验证。结果得到圆环巴西试验的抗拉强度建议公式,使用Hobbs公式得到的抗拉强度σTT比巴西圆盘试验σT大6倍以上,利用建议公式得到的抗拉强度σθ与巴西圆盘试验σT十分接近,误差不到1%。结论当圆环内外径比ρ在0.05到0.15的范围内时,该建议公式可很好地用来计算岩石类等脆性材料的抗拉强度。     

上海地区通风指数的应用研究

利用2013—2014年上海地区的风廓线资料及NCEP再分析资料,计算研究了上海地区通风指数的变化情况,并结合实际天气情况和预报经验,对常用通风指数公式进行本地化修正.通过分析修正前后的通风指数与颗粒物浓度的关系发现,修正后通风指数的时间变化特征与PM_(2.5)浓度的时间变化有显著的负相关关系,且经过修正的通风指数对于PM_(2.5)浓度变化的指示意义更强;研究其在典型污染个例中的应用情况发现,修正后的通风指数低时,对应的PM_(2.5)浓度值高,说明修正后的通风指数能较好地反映出边界层内大气对污染物的扩散和输送作用;另外,与未修正的通风指数对比发现,修正后的通风指数降低了原通风指数的数值,对污染的指示意义更强,尤其表现在上海地区受冷空气影响时,修正后的通风指数较原通风指数降低明显,能更好地反映出大气对上游地区污染物的输送作用.由此可见,经过修正后的通风指数更适用于本地化的预报服务,这也为上海地区的空气质量预报和霾预报提供了一个新的参考指标.     

高强度钢纵梁内板的成形性分析

重点对高强度钢纵梁内板的成形性进行了分析,并且在详细分析零件几何特点的基础上,对此模型的圆角半径进行了修改,修改后零件的成形性得到了显著提高。     

太湖流域面源污染控制对策研究

近年来.随着点源污染得到逐步治理,面源污染已成为水体富营养化的主要污染源,本文介绍了太湖流域面源 污染的现状,分析了其构成,列举了国内外目前治理面源污染的一些措施,并就太湖流域面源污染的特点提出了一些控制 治理对策。     

Preparation of steel slag porous sound-absorbing material using coal powder as pore former

The aim of the study was to prepare a porous sound-absorbing material using steel slag and fly ash as the main raw material, with coal powder and sodium silicate used as a pore former and binder respectively. The influence of the experimental conditions such as the ratio of fly ash, sintering temperature, sintering time, and porosity regulation on the performance of the porous sound-absorbing material was investigated. The results showed that the specimens prepared by this method had high sound absorption performance and good mechanical properties, and the noise reduction coefficient and compressive strength could reach 0.50 and 6.5 MPa, respectively. The compressive strength increased when the dosage of fly ash and sintering temperature were raised. The noise reduction coefficient decreased with increasing ratio of fly ash and reducing pore former, and first increased and then decreased with the increase of sintering temperature and time. The optimum preparation conditions for the porous sound-absorbing material were a proportion of fly ash of 50% (wt.%), percentage of coal powder of 30% (wt.%), sintering temperature of 1130°C, and sintering time of 6.0 hr, which were determined by analyzing the properties of the sound-absorbing material.     

铝合金LC52对接焊海洋大气应力腐蚀研究

在设计制作的恒载荷大气应力腐蚀试验装置上，进行了铝合金LC52对接焊拉伸试样的海洋大气应力腐蚀试验研究。，对海洋大气应力腐蚀试验中断裂的、加载应力为0.5σ。的试样分析表明．铝合金LC52焊接件在海南海洋大气环境下存在应力腐蚀开裂：Cl^-富集于SCC部分的含钙和／或含硫的第二相质点，促进了应力腐蚀开裂．获得了铝合金LC52焊接的海洋大气SCC失效特征。     

三峡库区滑坡地带岩石特性的研究

针对三峡库区组成滑坡岩层的主要岩石——泥质岩、灰岩、砂岩,通过显微镜观察、X射线分析显微镜的定量分析及室内岩石力学强度试验,对各岩石的特性进行了分析。显微镜及X射线定量分析结果表明风化较弱的泥质岩基本上含有石英与钙质矿物,后者由于易溶于水而导致岩石的孔隙率增加。孔隙的一部分连接形成了裂缝, 从而使岩石的强度下降。各岩石的单轴压缩试验结果表明砂岩的强度最高,发生了风化的泥质砂岩的强度最低。在饱和状态下紫红色泥岩及风化了的泥质砂岩的单轴压缩强度降低最显著,比自然干燥状态下降低了大约50%, 推测是受粘土矿物含量的影响。所有岩石都表现出在峰值强度之前应力与应变几乎呈线性关系,而峰值强度之后应力急剧下降的脆性特征。这种在饱和状态下岩石强度大幅度下降与脆性特征表明在治理滑坡时需要采取十分周密及复杂的预防措施。