某草浆造纸企业污染物综合利用措施研究

国内以草浆为原料制浆造纸的各类企业占造纸企业总数的65%以上。分析以某草浆为主的造纸企业生产过程中产生污染物的种类及特点;并根据其不同特征,有针对性地提出了节约生产用水、循环利用处理水、提高黑液提取率及碱回收车间废水零排放的方法;同时探讨了造纸企业排放的废渣、废气及污泥等资源综合利用措施。该造纸企业通过几年来的努力,在节水减污方面取得了一定的实效。为同行业处理污染物,综合和循环利用资源提供了参考。     

武汉月湖和莲花湖表层沉积物中持久性有机物的污染状况

采用气－质联用技术分析了武汉汉阳月湖和莲花湖的4个表层沉积物样品中的有机污染物,探讨了两湖沉积物受持久性有机物污染的程度。月湖中共检测出124种有机物,其中属环境优先控制污染物和美国EPA筛选的内分泌干扰物19种;莲花湖中共检测出186种有机物,环境优先控制污染物和美国EPA筛选的内分泌干扰物34种。主要污染物包括：酞酸酯、酯类、酚类、杂环和苯及其衍生物等。污染物浓度顺序为L1＞L2＞Y2＞Y1,莲花湖中有机物浓度明显高于月湖。两湖邻苯二甲酸酯的含量最高,占了污染物总量的96%~98%,邻苯二甲酸乙基己基酯（平均值 17 59903 ng/g 干重）和邻苯二甲酸二丁酯（平均值 2 515.76 ng/g 干重）是两湖沉积物中的主要酞酸酯类污染物。     

Optimization of the recovery of plastics for recycling by density media separation cyclones

Material recovery processes are presented as the optimum option for recycling plastic wastes as a means of recovering hydrocarbon resources. There exist a large variety of automated material recovery processes for recycling of such wastes but each with significant limitations. Of these, the separation based on differences in densities is advocated as the optimum process either for producing recycled products or preparing wastes for subsequent recovery processing.Density separation processes based on cyclone type density media separation (DMS) is presented as an important, potential method for increasing plastics recycling process capacities. It is demonstrated to have the capacity to separate a significantly larger range of particle sizes than those presently processed industrially. The mathematical relationship for the prediction of quality of typical LARCODEMS type density media separations by particle size and density as expressed by the Ecart Probable is presented.A proposed device configuration is presented for density media separation to optimize the recovery and purity of both density fractions produced. It is also suggested that to be economically viable, a large scale of operation is required for industrial plastics recycling operations recovering and producing a number of different plastics with a purity to be used as a substitute for virgin material.     

关于控制四川省大气污染物排放的建议

本文介绍了2007年四川省废气污染物的排放情况,并提出了进一步控制大气污染物排放的建议。     

“十一五”期间辽河铁岭段及支流水质变化趋势

用Daniel的Spearman秩相关系数法对辽河铁岭段及支流在"十一五"期间水质进行趋势检验,确定各监测断面超标污染物及综合污染指数上升或下降趋势的显著性,结合铁岭市"十一五"期间的污染治理措施,分析各项污染物产生变化的原因,提出了今后的工作方向,为进一步加强环境管理提供了依据。     

不同水生植物配置对河涌污水的净化效果

研究不同配置的挺水植物组合对河涌污水污染物的净化效果,为在河涌污水治理上构建有效的人工湿地植物处理系统提供依据。选择10种净化能力较强的挺水植物,组成6种不同配置的挺水植物组合,采用无土栽培的方式模拟人工湿地的环境进行静态培养试验,测定出不同水生植物组合及在不同污水的停留时间（HRT）下对河涌污水污染物的去除率。6种不同配置的水生植物组合在HRT为5 d时对NH4＋-N、TN、TP、CODCr、BOD5的去除率（平均去除率分别为98.2%、81.2%、91.3%、71.8%、79.4%）均较高;以组合1：香根草Vetiveria zizanioides＋风车草Cyperus alternifolius＋美人蕉Canna indica＋菖蒲Acorus calamus＋再力花Thalia dealbata的处理效果为最佳。不同水生植物系统对污水的净化效率取决于HRT,当HRT从1～5 d时,NH4＋-N、TN、TP去除率每天的增幅均逐渐增加,当HRT从5～7 d时,NH4＋-N、TN、TP去除率每天的增幅却均迅速下降;说明3种不同配置的水生植物系统对河涌污水NH4＋-N、TN、TP的净化效率均以HRT为5 d时最高。     

大体积水中痕量POPs的联动采集装置及其性能评价

天然水体中的痕量持久性有机污染物(POPs)的定量分析通常需要采集大体积水样.针对大体积水样在过滤和吸附富集过程中滤膜易堵塞且耗时费力的缺点,研制了一种固液分离过滤-吸附富集联动装置.该装置主要由粗过滤器、离心分离屏、倒置微孔过滤器、固相吸附柱、流速控制阀和真空泵组成.与传统的滤膜过滤方式相比,其过滤效率提高了约1.5...     

地表水特定项目优化检测技术研究

对地表水中特定项目指标的检测技术进行了优化研究,根据检测目标化合物的结构性质和色谱分析手段的兼容性,对前处理方法和分析手段进行了优化整合,提出了特定项目的解决方案,提高了工作效率,对切实保障饮用水源安全有实际意义.     

宁夏总量减排与环境质量改善的相关性分析

利用SPSS统计软件分析宁夏“十一五”期间主要污染物总量控制指标与环境质量数据的关联程度,并建立回归模型.结果表明:宁夏总量减排与环境质量改善存在高度关联,拟合曲线均为一元线性回归曲线.随着SO2排放总量降低,重点城市空气质量稳步改善,两者呈现同向变化的趋势;随着COD排放总量降低,黄河宁夏段水环境质量稳步改善,两者亦呈现同向变化的趋势.宁夏总量减排在环境质量改善上成效已显现,污染防治政策较为成功,环保成绩显著.     

Advances in the treatment of multi-pollutant flue gas in China's building materials industry

In most of the world's building material industries, the control of flue gas pollutants mainly focuses on a single pollutant. However, given the large capacity and high contribution of China's building materials industry to global air pollution, the need to develop multi-pollutant emission reduction technology is urgent. Recently, China has focused on reducing the emissions of flue gas pollutants in the building materials industry, established many key research and development projects, and gradually implemented more stringent pollutant emission limits. This project focuses on the most recent advances in flue gas emission control technology in China's building materials industry, including denitration, dust removal, desulfurization, synergistic multi-pollutant emission reduction, and the construction of pilot research and demonstration projects for pollutant removal in several building material industries. On this basis, revised pollutant limits in flue gas emitted in China's building material industry are proposed.