职业安全卫生标准体系建设初探

职业安全卫生标准体系是企业安全科研生产工作的基础 ,是推广试行职业安全卫生管理体系 (OHSMS)的有效技术支撑条件。笔者通过分析职业安全卫生标准应用的实际 ,探索性地提出建立适应企业职业安全卫生管理、研究以及 OHSMS需要的标准化管理体系 ;论述并研讨该体系建立的思路、原则和查询方法以及应用过程的管理 ;以此为职业安全卫生管理、研究和试行OHSMS奠定基础并提供有益的帮助。     

氮添加对不同坡度退化高寒草甸土壤真菌多样性的影响

为明确不同坡度退化高寒草甸土壤真菌多样性对外源氮添加的响应规律,选取三江源区果洛州不同坡度退化程度相近的高寒草甸,进行外源氮添加试验,探讨不同氮添加水平：低等量氮添加（LN,2 g ·m^-2）、中等量氮添加（MN,5 g ·m^-2）和高等量氮添加（HN,10 g ·m^-2）对不同坡度退化草地土壤真菌多样性的影响.结果表明：①土壤中真菌分布类群集中于子囊菌门（Ascomycota）、担子菌门（Basidiomycota）、被孢霉门（Mortierellomycota）和球囊菌门（Glomeromycota）,其中优势菌门为子囊菌门和担子菌门.子囊菌门、根肿黑粉门和油壶菌门等相对丰度在不同坡度间差异显著（P<0.05）.而同一坡度不同氮添加处理下真菌各门丰度变化差异均不显著.②优势属为被孢霉属和Archaeorhizomyces,它们对不同坡度和不同氮添加水平的响应无差异性.③已鉴定95个菌属在不同坡度间存在显著差异（P<0.05）.④一些相对丰度<1%的属在同一坡度不同水平氮添加间存在显著差异（P<0.05）.5 α和β多样性分析整体表现为在不同坡度和不同氮添加水平下土壤真菌群落无差异性.表明退化高寒草甸土壤真菌对外源氮添加的响应不敏感.     

大功率中短波广播天线电磁辐射的预测与防护

随着城镇密集度越来越高,大功率电磁辐射设备如大功率中短波天线不可避免的与建筑越来越近,因而对室内的电磁环境污染逐步加剧。电磁辐射造成的危害通常包括对人体健康的危害(健康效应)和干扰其他电磁设备而造成严重后果(电磁干扰)。针对大功率中短波天线造成的电磁环境污染问题,提出一套远场条件下电磁辐射的预测方法并成功预测了一个典型大功率中短波天线群附近的拟建项目区域的电磁环境,在此基础上,提出有效的针对拟建项目的电磁防护方案。     

职业安全卫生标准体系的研究

简要介绍了国内外职业安全卫生标准体系研究的概况,指出了建立我国职业安全卫生标准体系的重要性。运用系统分析的观点和方法,提出了我国职业安全卫生标准体系的编制原则和总体结构。     

碳磷添加对黄土区农田土壤呼吸及温度敏感性的影响

黄土区耕地面积占全国耕地面积的15%以上,该区域降水资源贫乏,是我国土壤生产力和土壤有机碳储量最低的区域之一。营养的大量投入可以极大地提高土壤生产力,但对于营养添加下土壤CO_2排放有何变化以及是如何改变黄土区土壤环境,进而影响土壤呼吸及温度敏感性还尚不清楚。本文以长武实验田的黑垆土作为研究对象,分别对N12(施氮量120 kg?hm~(-2))土样设置不添加、添加磷源以及CK(长期连作不施肥)土样设置不添加、添加磷源、碳源、碳磷源(共计6个处理),比较分析在15℃和25℃培养下土壤呼吸速率的变化,以及培养周期内土壤温度敏感性Q_(10)(即温度每升高10℃,温室气体排放速率变化的倍数)的变化趋势。通过对呼吸前后土壤pH值、全碳全磷、有机碳、速效磷、硝态氮、铵态氮以及微生物生物量碳磷(MBC、MBP)的测定,分析其影响因素。碳磷添加在一定程度上提高了土壤的呼吸速率,其中碳源的添加明显增强了土壤呼吸速率以及土壤Q_(10)值。碳磷添加大幅度提高了土壤全碳、速效磷含量以及微生物活性,15℃条件培养后,土壤微生物生物量最高。碳磷添加后,土壤呼吸速率与土壤pH、全碳、铵态氮、MBC呈极显著相关关系。该研究为黄土区土壤生产力的提高以及降低温室气体的排放、恢复和改善生态环境提供理论依据。     

氢气添加对乙醇/空气预混火焰燃烧特性影响的数值模拟研究

通过对不同混合比率的乙醇/氢气/空气燃烧特性进行数值模拟,研究氢气添加量对点火延迟时间、层流燃烧速度、火焰厚度、化学反应滞留时间及组分分布情况的影响。研究发现一定程度上氢气添加量的增加能够缩短混合气体的点火延迟时间,并且氢气对点火延迟时间的影响随着温度的升高而逐渐减小。随着混合比率的增大,层流燃烧速度增大,并且在混合比率大于0.4时显著增大。火焰厚度及化学反应滞留时间随氢气增加而逐渐减小。此外,进一步分析组分分布情况得知氢气添加使火焰中H*、O*、OH*自由基摩尔分数峰值增大,并且H+O+OH摩尔分数峰值与层流燃烧速度存在线性关系。     

Laboratory investigation of Waelz slag stabilization

Electric Arc Furnace dusts are considered hazardous waste due to their high heavy metals content (zinc, lead, etc.). The Waelz process is one of the most efficient technologies, in terms of capacity and quality, able to recover nearly the 90% of zinc contained in such EAF dusts. Unfortunately, the resulting slag still has eco-compatibility problems, although its mechanical and chemical properties are suitable for civil engineering applications. Stabilization tests, by quartz addition, were performed on EAF dusts in a laboratory furnace. Temperature, treatment time and cooling rate were varied in order to define the best conditions for regulating the formation of a stable microstructure able to hinder the release of substances. Microstructural characterization was carried-out using SEM and XRD analysis. Leaching tests were performed according to EN 12457-2 standards and water analyses were performed using ICP-OES. The best chemical stability was achieved when dust powders were mixed with 20% of silica and water-cooled.     

双波长标准加入法同时测定水中硝酸盐和亚硝酸盐

本文应用双波长标准加入法同时测定了硝酸盐和亚硝酸盐，在研究硝酸盐和亚硝酸盐紫外光谱的基础上，精确选择亚硝酸盐等吸收点波长２０２．５ｎｍ，２１６．５ｎｍ为测定波长。亚硝酸盐含量回归方程经推导得Ｃ＝－３．８４１＋１５６．６Ａ，相关系Ｒ＝１．０００。将该法用于合成样品及实际水样分析，所得结果较满意。     

Soot reduction by addition of dimethyl carbonate in normal and inverse ethylene diffusion flames: Nanostructural evidence

Oxygenated fuel represents an attractive alternative as an additive for reducing soot emissions.Dimethyl carbonate(DMC) is an oxygenated compound which is a good option to reduce soot,but the detailed characteristics of soot produced from combustion of hydrocarbon fuels blended with DMC are still lacking. The present research studied the nanostructure and reactivity of soot particles in ethylene/DMC normal and inverse diffusion flames. High resolution transmission electron microscopy(HRTEM), X-ray diffraction(XRD), and thermogravimetric analysis(TGA)were used to analyze the nanostructure and reactivity of soot. It was found that DMC addition was effective in decreasing the average weights of soot formed in flames. The results of HRTEM images showed that soot particles obtained with DMC addition showed liquid-like material and tight bonding, and exhibited more highly disorganized layers, which give it higher reactivity than soot obtained without DMC addition. Furthermore, HRTEM was used to analyze soot fringe characteristics consisting of fringe tortuosity, fringe length, and fringe separation. XRD was used to crosscheck the results for fringe separation, and was consistent with HRTEM results. In addition, the mass loss curve of TGA experiments showed that DMC addition could enhance the reactivity of soot particles.