单室微生物燃料电池产电与脱氮除磷的研究

实验针对空气阴极型单室微生物燃料电池(Microbial Fuel Cell,MFC),研究其产电性能及对实验室模拟废水中有机物、氮和磷元素的去除效果.结果表明,在外电阻为1000Ω的情况下,该电池最大输出电压可达371 m V,最大输出功率密度可达301.6 m W·m~(-2),最大电流密度可达2.4 A·m~(-2),内阻为200Ω.当入水氨氮浓度为4 mmol·L~(-1)时,该电池的产电效果最好,对污染物的去除效果也较好.研究还发现,电池最佳运行周期为72 h,阳极室出水最佳曝气时间为6 h,阳极室出水COD、TN和TP的降解率分别为93.3%、19.7%和44.8%.将阳极液曝气处理后,相对于阳极室入水其TN和TP的总去除率分别可达79.6%和95.2%.另外,通过扫描电镜观察到MFC的阳极液中大多为球形菌,阴极电极表面有针状的结晶形成,经能谱测试为鸟粪石结晶.     

Evaluation of the explosibility of malt grain dust based on static electrification during pneumatic transportation

The possibility of dust explosions by static electricity in a malt grain silo was investigated. Two kinds of experimental equipment were applied. One was to supply electrostatic charge in order to investigate the charge build up characteristics. The other was to transport the malt grain pneumatically in order to investigate the frictional charge accumulation in the transportation system.

The particle charge of the pulverized malt grain was in the order of 10⁻¹⁴ C. The particle charge of the malt grain was in the order of 10⁻⁹ C and the pipe charge in the transport system was also in the order of 10⁻⁹ C. The charge accumulated on both the pulverized particle and the grain particle were small in view of the incendiary potentiality. However, attention must be paid when the particles are dumped into isolated space. There might be a charge accumulation that will lead to the ignition of the dust cloud.     

Planning implications from the interactions between renewable energy programs and carbon regulation

Complex relationships exist between programs to reduce carbon dioxide (CO₂) from the electricity sector and programs to promote renewable electricity generation. Simulation modeling of three scenarios in the UK electricity sector are used to identify potential interactions between these programs. A strict CO₂ cap can result in a renewable electricity requirement being easily met. Conversely, the renewables quota could be required under low natural gas prices to keep electricity suppliers from switching from coal to gas. Similarly, CO₂ trading can reduce renewables deployment levels because purchased CO₂ allowances replace renewables. Therefore, both programs are required to ensure CO₂ and renewables goals. The planning implications for administrative procedures and renewables subsidies are also discussed.     

“Hypersensitivity to Electricity” in the Office; Symptoms and Improvement

Nineteen persons “hypersensitive” to electricity and 20 nonafflicted persons were studied for 1 ½ years. The most discernible hypersensitivity symptoms were pricking sensations and redness in the face, but these symptoms were present in only half of the afflicted. Other symptoms were similar to symptoms experienced during office work and this study does not support the idea that electrosensitivity is one single syndrome. The “hypersensitive” persons improved significantly, mainly on neuropsychiatric symptoms, but the skin problems sustained— as did the belief about their cause. The afflicted persons used less conventional medication than the group of the nonafflicted, which suggests a general tendency for attribution to environmental factors.     

A Non-confrontational Approach to Socially Responsible Air Pollution Control: The electoral experience of Kitakyushu

Social scientists have described Japan's urban anti-pollution protests in the 1960s as a national phenomenon. However, in Kitakyushu, Japan's most polluted industrial city at that time, no distinct citizens' movement developed. Because local politics and economics were so dominated by large industry, its citizens were reluctant to directly challenge these industries. Instead, local women's groups studied local pollution problems and presented their general findings to the public. These activities raised public awareness and resulted in increased support for local leftist politicians because leftist administrations had succeeded in cutting pollution in their cities. Kitakyushu's conservative mayor and local industry both became concerned that leftists would win the next local elections if pollution was not reduced. Thus the municipal government utilised scientific pollution data and prepared individualised pollution reduction recommendations in sulphur oxide pollution control agreements, which were accepted and complied with by all local industries. The result was a significant reduction in air pollution without the need for active intervention from Kitakyushu's citizenry. Cientificos sociales han descrito las protestas anti-polución urbana de Japon en los años 60 como un fenómeno nacional. Sinembargo, en Kitakyushu, ciudad industrial japonesa más polucionada en ese tiempo, no se desarrollóningún movimiento ciudadano evidente. Debido a que las políticas locales y económicas eran dominadas por la gran industria, sus ciudadanos no estaban dispuestos a retar directamente estas industrias. En lugar de eso, grupos locales de mujeres estudiaron problemas locales de polución y presentaron sus resultados al público. Estas actividades despertaron conciencia pública y resultaron en el incremento del apoyo para políticos izquierdistas locales debido a que las administraciones izquierdistas habían triunfado en la reducción de la polución en sus ciudades. El alcalde conservador y la industria local de Kitakyushu empezaron a preocuparse que los izquierdistas ganarían las próximas elecciones locales si la polución no era reducida. Asíque, el Gobierno Municipal utilizó información científica sobre polución y preparó recomendaciones de reducción de polución individualizada en acuerdos de control de polución en oxído sulfurico, los cuales fueron aceptados y obedecidos por todas las industrias locales. El resultado fue una significativa reducción en la polución del aire sin la necesidad de la intervención activa de parte de la ciudadania de Kitakyushu.     

A material and energy flow model for co-production of heat and power

Co-production of electricity, district heat and industrial heat/process steam (heat and power, CHP) has been applied to a large, national scale, in only a few countries in the world, Denmark, The Netherlands and Finland. In this production method, the waste energy from electricity production is used in two quality levels. First, industrial process steam requirements can be met with this residual energy. Second, the waste energy is used in local district heating networks for households and other buildings in a city. In this integrated production method, a total fuel efficiency of 85% can be achieved. Through the technique of fluidized bed combustion, modern CHP plants can use coal and oil, and in addition, heterogeneous fuels such as biomass, industrial wastes and recycled fuels from households. In this paper, the CHP method is considered in terms of four categories of material and energy flows. For the purpose of considering the potential environmental gains and the difficulties of this production method when applied to integrated waste management and energy production, the four suggested categories are: matter (biomass) (1), nutrients (2), energy (3) and carbon (4). Corporate environmental management inventory tools, decision-making tools, management, organisational and administrative tools as well as information management tools that could be used in CHP-related material and energy flow management are shortly discussed. It is argued that for CHP energy and environmental management, it can be important to adopt an approach to networks of firms, rather than to an individual firm. The presented material and energy flow model may contribute to assessing, planning and implementing of CHP-based waste management and cleaner energy production.     

矿化垃圾除磷特性及其影响因素的研究

主要研究了KH2PO4溶液在矿化垃圾中的吸附性能,静态和动态试验研究表明在静态试验条件下,初始浓度越高,固液比越小,矿化垃圾吸附磷量越多;pH对磷吸附性能具有较大的影响,当pH在8左右时,矿化垃圾吸磷量达到最大吸附量.在动态实验条件下,湿干比减小,配水速率减小,都有利于矿化垃圾除磷率的增加,当初始溶液的磷质量浓度为50 mg/L时,矿化垃圾有最佳除磷率.     

管道烟气静压测量方法探讨

通过对三种常用管道烟气静压测定法进行理论和试验分析,推荐一种实用的静压间接测定法,并对该法进行理论分析和试验验证。     

混菌接种条件下微生物燃料电池芯片的产电特性研究

微生物燃料电池(MFC)芯片因具有体积小、运行条件温和、产电稳定等优点而有可能成为一种新型的野外水环境监测系统中传感器供能方式.但目前采用纯菌种及贵重金属阳极构建的MFC芯片,不仅成本较高且纯菌种在复杂环境条件下不易存活和保持稳定.因此,本文通过采用混合菌群接种,以活性炭为阳极,构建了阳极体积为50μL的MFC芯片,发现其稳定运行最大输出电流为3.5μA,平均运行周期为8.0 h,最大输出功率约为160 nW,最大功率密度为10.2 mW·m-2.EIS分析结果表明,MFC芯片的总内阻约为35.6 kΩ,其中,阴阳极内阻占主要部分.本研究制备的MFC芯片产电性能达到了同类采用纯菌株及Au作阳极的MFC芯片的性能,表明采用低成本材料为阳极,接种混合菌液的MFC芯片是完全可行的.     

利用双室微生物燃料电池处理模拟废水的产电特性研究

本实验通过研究电池的启动过程、阳极有机物降解率和阴极Cu2+的去除率,评价了微生物燃料电池(microbial fuel cell,MFC)的产电和处理废水性能.以模拟糖蜜废水作为阳极基质,模拟电镀废水作阴极电子受体,建立简单的双室微生物燃料电池.结果表明在外电阻为800Ω的情况下,电池得到最大电压417.00 mV,从极化曲线上获得最大输出功率密度44.17mW.m-2,内阻为293Ω.电池在第五周期时,COD去除率也达到最高47.31%.在第四周期内,Cu2+最大的去除率为59.76%.综上所述,MFC在处理有机废水和电镀废水方面具有可行性.