粉煤灰基质复合滤料吸附Mn^2＋试验研究

以粉煤灰基质复合滤料为吸附材料,通过单因素和正交实验相结合的实验方法,考察了吸附滤料投加量、吸附时间、原水初始浓度、振荡频率、温度等因素对除锰效果的影响。从单因素实验可知：随着滤料质量的增大,Mn2＋去除率在开始时增长幅度较大,后来逐渐趋于平缓。在正交实验中固定滤料投加量为300 g/L,发现在锰离子的吸附过程中,吸附时间的影响最大,随后分别是原水浓度和温度,振荡频率的影响程度最小。     

碳钢在高温高盐矿井水中腐蚀与缓蚀性能的试验研究

为了解决高温高盐矿井水对碳钢管道和设备腐蚀问题,进行了缓蚀挂片试验,研究适应该类水质的缓蚀剂种类和最佳投加量。试验结果表明：软化剂氢氧化钙和碳酸钠对碳钢均有一定缓蚀效果．其平均缓蚀率分别为17．33％、57．46％。因此药剂软化过程同时达到防腐效果有限：单独投加缓蚀剂HEDP的缓蚀效果明显,其静态缓蚀率82．46％以上,动态缓蚀率76．45％：复合配方缓蚀剂的缓蚀效果最好,最佳配方为“有机膦酸一聚环氧琥珀酸一锌盐”或“有机膦酸一磺酸基团多元共聚物一锌盐”,在投加量80mg／L时动态缓蚀率接近90％。     

石羊河流域1959年至2008年风速变化特征分析

利用线性拟合、Mann—Kendall方法、小波分析对石羊河流域五个测站空间平均的近50年来的逐日风速资料进行了倾向、周期、突变等特性分析。研究结果表明：1959年至2008年间,整个石羊河流域风速呈减小趋势,变化率约为-0．004m／（s．a）．而上游风速呈现明显的上升趋势。四个季节中冬季风速降低速度最大,而夏季风速呈现上升趋势。风速的长期变化还具有一定的突变性,年平均风速在1988年出现了由高到低的突变,表明风速开始下降。复值Morlet小波分析的结果显示,风速变化存在6a、13a、19a、25a四个峰值。其中19a的时间尺度为第一主周期。     

高锰酸盐指数一酸性法空白质量控制研究

常规监测高锰酸盐指数-酸性法,通过对高锰酸盐指数空白测试与检测限、空白质控图、空白加标回收率进行测试研究,可以得到理想的监测结果。     

一次环境污染司法鉴定的测试与分析

受人民法院的委托,环境监测部门对一起汽车尾气致人死亡案件的现场进行大气污染物和空气质量的模拟测试。测试表明,在密闭的车库内,汽车外和汽车内CO浓度都会迅速增加,达到致人死亡的浓度,O2浓度迅速减少,最终使汽车发动机熄火。测试为司法部门提供案件审理现场空气质量数据,也提醒人们不要在密闭的车库内开启汽车空调取暖或纳凉休息。     

Improvement of welding heat source models for TIG-MIG hybrid welding process

Tungsten inert gas-metal inert gas (TIG-MIG) hybrid welding process is an effective way to improve welding productivity and quality due to advantages of the two processes. Mathematical analysis is crucial to fundamentally understand this synergetic welding process. In this study, based on experimental visualization of arc behaviors, some assumptions are proposed to deduce adaptive plane and volumetric heat source models separately for each involved welding method first. The influence of torch angles on distribution of temperature and geometry of weld bead are calculated and compared with experimental results. It shows that this developed algorithm of heat source can be employed to accurately predict welding process whether the electrode gun is slanted backward or forward to the direction of welding. Then TIG-MIG hybrid welding process is simulated and analyzed without considering the attractive or repulsive force of two arcs. The characteristic of TIG-MIG welding process is discussed compared to single MIG. It lays the foundation for the further research on the interaction of the two arcs during TIG-MIG hybrid welding.     

Warm forming die design,Part II: Parting surface temperature response characterization of a novel thermal finite element modeling code

The majority of the research activities in the area of warm forming are concentrated on demonstrating or simulating the improved formability associated with forming lightweight materials such as aluminum alloys at elevated temperatures. However, the ability to design the proper thermal management system within the forming tool is a critical aspect to delivering this technology as a viable, stable production alternative to traditional stamping. This work begins to address the thermal stability issues of this process by examining the impact of process cycle time on the parting surface temperature response. Cycle times of 10, 15, 30, and 300 s were evaluated using a reciprocating surface and a self-heated experimental block of 1020 steel fitted with resistance cartridge heaters. The presented results indicate that cycle time does not significantly impact the steady-state temperature response at the parting surface for a well-insulated die that has proper thermal management. Parting surface experimental results were compared to values obtained numerically and through the use of the novel thermal finite element analysis software PASSAGE/Forming^®.     

储油罐区防火堤受力情况分析

利用ANSYS有限元分析软件,对防火堤受液态物质冲击时受力状况进行模拟,并对防火堤在冲击载荷下的受力情况进行了分析,指出防火堤在事故状态下的脆弱部分,对油库的安全设计、评价和日常维护具有参考价值。     

重质油储罐固定式泡沫灭火系统设计优化研究

通过重质油储罐的实体火灭火试验,获得了氟蛋白泡沫液和水成膜泡沫液的供给强度与灭火时间对应关系数据,确定了每种泡沫液扑救重质油储罐火灾的最低泡沫供给强度;以10 000 m3固定顶重质油储罐为例进行了泡沫系统设计计算,将优化设计方案与原有设计方案进行了对比,主要变化是泡沫发生器数量从4只提高至6~8只,泡沫主管线管径从DN200提高至DN250,泡沫消防泵流量也相应提高。优化后的储罐泡沫灭火系统提高了泡沫灭火能力,提升了系统的可靠性,降低了储罐火灾风险。     

藻类水体Cd2+毒性快速监测新方法研究

采用藻类生长抑制试验和光合活性抑制试验两种方法对蛋白核小球藻受不同浓度Cd2+胁迫作用下叶绿素浓度及藻活性荧光参数进行测量,依据Sigmoidal曲线拟合及单因素方差分析(one-way ANOVA)的方法对Cd2+不同胁迫时间下藻活性抑制率和96 h比生长率抑制率的相关性进行研究.结果表明,48、53、72、77和96 h的藻活性抑制率和96 h比生长率抑制率间具有较好的S函数关系(R2>0.95),因此可采用藻活性抑制率48 h-EC10和53 h-EC10来代替96 h的藻类半数比生长率抑制率EC50进行Cd2+藻类毒性实验评价.进一步分析了蛋白核小球藻受Cd2+胁迫48 h和53 h藻活性抑制率和Cd2+毒性当量的剂量-效应关系.该方法为实验室内单一Cd2+毒性的监测提供了一种快速有效的新方法,为水环境综合毒性预警提供了一种切实可行的方法依据.