固相萃取富集高效液相色谱法测定环境水样中的重金属元素

研究了用固相萃取富集高效液相色谱法测定环境水样中痕量重金属镍、铜、银、铅、镉和汞的方法。环境水样中的镍、铜、银、铅、镉和汞用四 -(对二甲氨基苯基 ) -卟啉 (T4 -DMAPP)柱前衍生 ,用C18固相萃取小柱萃取富集镍、铜、银、铅、镉和汞的T4 -DMAPP络合物 ,富集倍数为 1 0 0倍 ,然后用甲醇和四氢呋喃梯度洗脱为流动相 ,WatersXter raTMRP18( 3 9mm× 1 5 0mm)色谱柱为固定相分离 ,用二极管矩阵检测器检测。镍、铜、银、铅、镉和汞的检测限分别为3、2、4、3、1 5ng/L和 3ng/L。方法相对标准偏差为 1 8%— 3 2 % ,标准回收率为 92 %— 1 0 7%。该方法用于测定环境水样中的痕量重金属 ,结果令人满意     

高效液相色谱法测定饮用水中的微囊藻毒素RR和LR

利用高效液相色谱法(HPLC)测定了藻毒素(MC-RR、LR)标准样品,并绘制了标准曲线,藻毒素浓度在0~5mg/L范围内,HPLC峰面积与藻毒素进样量呈线性关系,RR和LR相关系数分别为0·9986和0·9992,表明该方法可靠、灵敏度较高。对毒素的富集方法及分析条件进行了优化,并在藻类高发期的7~10月份,通过固相萃取(SPE)法对T市饮用水中的MCs进行浓缩富集后,用高效液相色谱仪和标准曲线测出MC-RR和MC-LR值。结果显示,T市高藻期饮用水中含有MCs,应引起足够的重视。     

面向新世纪的MARPOL73／78公约及其附则Ⅱ

国际海事组织目前正在对《ＭＡＲＰＯＬ７３／７８公约》附则Ⅱ－控制散装液体有毒物质污染规则作重大修改，内容包手胡毒液体物质和化学品，这很可能对主管机关、船公司和化工界造成严重的冲击。     

Large pore size polyacrylonitrile membrane for ultrafiltration

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｒｅｃｅｎｔｙｅａｒｓ,ｔｈｅｔｅｃｈｎｉｑｕｅｆｏｒｕｌｔｒａｆｉｌｔｒａｔｉｏｎｈａｓｇａｉｎｅｄｒａｐｉｄｄｅｖｅｌｏｐｍｅｎｔ.Ｍｏｒｅａｎｄｍｏｒｅｋｉｎｄｓｏｆｍｅｍｂｒａｎｅｓａｒｅｓｔｕｄｉｅｄａｎｄｍａｎｕｆａｃｔｕｒｅｄ ,ａｎｄａｌａｒｇｅ ｓｃａｌｅｉｎｄｕｓｔｒｉａｌａｐｐｌｉｃａｔｉｏｎｈａｓｂｅｅｎｇｒｏｗｎ .ＰＡＮｐｏｌｙｍｅｒｉｓｅｘｔｅｎｓｉｖｅｌｙｕｓｅｄｔｏｐｒｅｐａｒｅＵＦｍｅｍｂｒａｎｅｓ(Ｓｔｏｉｋｏ,1 991 ) .Ｉｔｓｈｙｄｒｏｐ…     

BOD微生物膜的再利用研究初探

对失去大部分活性的微生物膜进行再培养,以研究膜再利用的可能性。试验结果初部表明:在1/2MS培养基中加入一定量的植物激素,不仅可以使膜的电位值(I0)显著升高,且活性强,稳定性好,可使膜重复利用。     

己二胺有机废液在流化床中焚烧的实验研究

在实验室规模的热态流化床试验台上，进行了含5％己二胺有机废液的焚烧 实验研究，在700－900℃范围内，研究温度及空气过剩系数对NOx沿床高的变化规律，以及它们对NOx排放浓度的影响。实验结果表明，沿高度方向上NOx浓度 逐渐降低，并且存在NO2浓度大于NO浓度这一有趣现象，在900℃下氧量增加有利于密相区NO、NO2浓度的降低，说明在 有氧条件下NH2促进NOx的还原，在不同空气 过剩系数下和然相区出口NOx几乎为零 ，表明900℃是己二胺有机废液焚烧 的合适温度。     

Studies on the use of power ultrasound in solid–liquid myrobalan extraction process

Focus on eco-friendly processing techniques makes vegetable tanning a viable option in leather processing and establishes the subsequent need for the more efficient methods of extraction in tannin manufacture. Application of ultrasound has been tried in the extraction of tannins from myrobalan nuts in order to improve the extraction efficiency, to perform the extraction under milder process conditions and to reduce the process time. The influence of process parameters such as ultrasonic output power, time and temperature has been studied. Scale-up trials and the use of ultrasound in pulse mode have also been attempted. The results show that a three- to fivefold improvement is possible with ultrasonic output from 20 to 100 W. Extraction efficiency has been calculated from the maximum extractable materials from myrobalan nuts. Extraction efficiency is found to be 90% for ultrasound, 100 W without external heating as compared to 77% for control process at 70 °C for 4 h. Therefore, ultrasound could be employed even dispensing with provision for temperature controls. The use of ultrasound in pulse mode offered 70% extraction efficiency of continuous mode. Scale-up trials indicate that there exists an optimum ultrasonic output power depending on the amount of nuts used, to achieve better extraction efficiency. The effectiveness of ultrasonically extracted tannin solution has also been tested in the tanning process for its applicability. The degree of tanning efficacy has been assessed by shrinkage temperature measurement. The results indicate that ultrasonically extracted tannin solution is suitable for tanning process. Therefore, application of ultrasound in tannin extract manufacture is a viable option with added advantages.     

渣油－水乳化液作为路面抑尘剂的研究

为了有效抑制汽车运输路面的扬尘，选择低浓度渣油－水乳化液作为抑尘剂，通过在实验室大量的试验，掌握了一组渣油乳化的最佳配方及其制备工艺，即渣油３％－６％，乳化剂约０．５％，水９３．５％－９６．５％，制备温度＞７０℃．经过室内和现场大规模试验表明，当路面喷洒量达到２．２ｋｇ／ｍ２时，其有效抑生时间达到１０ｄ以上，并且在一定程度起到养路的作用，长期使用可取得显著的综合经济效益．     

低浓度渣油-水系乳化液的抑尘性能现场试验研究

本文介绍了作者用渣油－水系乳化液做路面抑尘剂在某矿露天坑３种不同类型路面进行的大规模工业性试验。现场测定结果表明：这种路面抑尘剂可以获得比较理想的防尘效果，长期使用该乳化液可取得显著的综合经济效益。     

Membrane fouling control by ultrasound in an anaerobic membrane bioreactor

In this study, ultrasound was used to control the membrane fouling online in an anaerobic membrane bioreactor (AMBR). Short-term running experiments were carried out under different operating conditions to explore feasible ultrasonic parameters. The experimental results indicated that when the crossflow velocity was more than 1.0 m/s, membrane fouling could be controlled effectively only by hydrodynamic methods without ultrasound. When ultrasound was applied, an ultrasonic power range of 60–150 W was suitable for the membrane fouling control in the experimental system. The experimental results showed that the membrane fouling was controlled so well that membrane filtration resistance (ΣR) could stay at 5 × 10¹¹ m⁻¹ for more than a week with the crossflow velocity of 0.75 m/s, which equaled the effect of crossflow velocity of more than 1.0 m/s without ultrasound. Translated from Techniques and Equipment for Environmental Pollution Control, 2006, 7(4): 25–29 [译自: 环境污染治理技术与设备]