Aliphatic and polycyclic aromatic hydrocarbons in sediments of Kaohsiung Harbour and adjacent coast, Taiwan

Surficial sediment samples collected from Kaohsiung Harbour and its nearby coast were analyzed for aliphatic hydrocarbons and parent polycyclic aromatic hydrocarbons (PAHs). According to our results, the average total concentrations of n-alkanes (n-C₁₂ to C₃₅) and aromatics (15 PAHs) were 4.33 µg g^–1 dry weight (ranged 0.46–22.60) and 0.59 µg g^–1 dry weight (ranged 0.09–1.75), respectively. The highest concentrations of aliphatic and aromatic hydrocarbons were recorded in stations near the estuaries of Qianzhen River and Love River, respectively. Aliphatic hydrocarbons in the samples indicate that there has been significant non-petrogenic, possibly terrestrial, contribution in the sediment of the open coast of Kaohsiung Harbour and that there has been dominant contribution from petrogenic sources in the sediment of the inner harbour. PAHs, detected in the samples, however, indicated a higher pyrolytic contribution in open-coast samples and a higher petrogenic contribution in the inner harbour. Overall, sediment concentrations of total alkanes in this study were comparable to those found in Victoria Harbour, Hong Kong and are higher than those found in Xiamen Harbour, China. Concentrations of total PAHs in inner Kaohsiung Harbour sediments were relatively lower than those found in Victoria Harbour, Hong Kong and Xiamen Harbour, China, but comparable to those found in Hsin-ta Harbour, Taiwan and Incheon Harbour, Korea. In comparison with several effect-based sediment quality guidelines, most PAH concentrations found in samples taken from inner harbour stations exceeded the Threshold Effect Level of Florida indicating a slight possibility of adverse effects.     

楔横轧轴肩的成形曲面的设计

此文分析在二辊楔横轧中轧制各类轴肩的过程。在假想工件轴端固定的图上确定楔侧面截面轮廓形状,再通过叠加轴向刚性移动量确定各截面实际位置,比较直观简便地设计出轧制轴肩的辊面上的成形曲面。最后归纳了设计步骤。     

海洋沉积物中的多氯联苯

综述了目前国内外对PCB的研究状况，并指出了PCB的来源、分布及其在沉积物和水相之间的循环受人为活动和生物活动等许多因素的影响。此外本文还概述了PCB的毒性研究近况以及测定其在沉积物中行为的方法，从而为控制环境污染提供了科学依据。     

黄河中游主要重金属污染物的迁移转化

探讨了内蒙古自治区黄河水体中微量有毒重金属汞、镉、铅、砷在水体中的迁移、转化。对于控制重金属污染物在水体中的形态分布、迁移转化及归宿具有重要的作用。     

Developing sediment quality criteria for heavy metal pollution in the Le An River with equilibrium partitioning approach

１ＩｎｔｒｏｄｕｃｔｉｏｎＡｃｔｉｎｇａｓｒｅｐｏｓｉｔｏｒｙｏｒｓｏｕｒｃｅｏｆｖａｒｉｏｕｓｃｏｎｔａｍｉｎａｎｔｓｕｎｄｅｒｄｉｆｅｒｅｎｔｃｏｎｄｉｔｉｏｎｓ，ｐｒｏｂｌｅｍｓｅｄｉｍｅｎｔｓｍａｙｔｈｒｅａｔｅｎｔｈｅａｑｕａｔｉｃｏｒｇａ...     

物化-生化组合工艺处理化纤厂浆粕综合废水

根据化纤厂浆粕综合废水的水质特点 ,选择采用中和曝气 水解酸化 生物接触氧化 絮凝沉降处理工艺。实验结果表明 :当浆粕综合废水进水CODCr浓度 310 0～ 34 6 0mg/L ,BOD5浓度 10 2 0～ 142 0mg/L范围内时 ,处理后水质可达到《污水综合排放标准》GB8978 96中化纤浆粕工业二级排放标准。     

沉淀物和生物中U,Th和226Ra的联合测定

用放射化学法对U,Th,~(226)Ra等核素进行联合测定,国外已有不少报道,只是所用的分离方法和所测的介质不同而已。我国学者也做过一些这方面的工作。本工作建立了用三正辛胺-二甲苯萃取分离法对沉积物和生物样中U,Th和~(226)Ra的联合测定方法。 二、主要仪器与试剂     

陆架浅海沉积物-海水界面溶质通量的计算方法及其应用

陆架浅海沉积物—海水界面上的溶解态生源物质通量的准确估算是海洋生态系统动力学研究中的关键性问题之一。由于底栖生物活动以及海流、海浪及潮波与海底地形地物相互作用的影响 ,使得该通量的准确估算十分困难。本文综合分析讨论了近年来提出的各种计算该类通量的物理模型及参数的确定方法 ,并结合在中国黄、东海等陆架浅海水层—底栖生态动力学耦合模型研究的需要 ,比较深入地讨论了应用过程中应该考虑的几个问题     

无顺市水污染物总量分配探讨

根据抚顺市地表水系和水域功能区划的分布情况，采用了定额达标分配、治理费用最小，及按现有排污总量进行达标分配的方法对水污染物进行总量分配，从而对减少污染物排放，控制水体污染提供了技术支持。     

广西近岸海域海水和沉积物及生物体中的重金属

以1998年广西近岸海域环境综合调查的资料，分析了广西近岸海域海水、表层沉积物及海洋生物体中重金属的含量分布，表层沉积物中重金属与有机质含量之间的相关关系，海洋生物对重金属的富集情况。结果表明，广西近岸海域海水中的Pb和表层沉积物中的Cu、Pb和As及生物体中的Cd含量部分超标。